diff mbox

fbdev: sh_mobile_lcdc: reduce scope of a variable

Message ID w3pipsfaas0.wl%kuninori.morimoto.gx@renesas.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Kuninori Morimoto June 9, 2011, 4:28 a.m. UTC
Dear Paul, Guennadi

I cannot compile on current paul/master.
below patch seems breaks compile.
"ret" is still needed.

Can you revert it or apply attached patch ?

At Thu, 05 May 2011 18:32:36 +0200 (CEST),
Guennadi wrote:
> 
> The "ret" variable in sh_mobile_lcdc_start() is only used at one
> location, move its definition to the inner-most scope.
> 
> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> ---
>  drivers/video/sh_mobile_lcdcfb.c |   12 ++++++------
>  1 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
> index 9bcc61b..466834c 100644
> --- a/drivers/video/sh_mobile_lcdcfb.c
> +++ b/drivers/video/sh_mobile_lcdcfb.c
> @@ -469,7 +469,6 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
>  	int bpp = 0;
>  	unsigned long ldddsr;
>  	int k, m;
> -	int ret = 0;
>  
>  	/* enable clocks before accessing the hardware */
>  	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
> @@ -538,11 +537,12 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
>  		lcdc_write_chan(ch, LDPMR, 0);
>  
>  		board_cfg = &ch->cfg.board_cfg;
> -		if (board_cfg->setup_sys)
> -			ret = board_cfg->setup_sys(board_cfg->board_data, ch,
> -						   &sh_mobile_lcdc_sys_bus_ops);
> -		if (ret)
> -			return ret;
> +		if (board_cfg->setup_sys) {
> +			int ret = board_cfg->setup_sys(board_cfg->board_data,
> +						ch, &sh_mobile_lcdc_sys_bus_ops);
> +			if (ret)
> +				return ret;
> +		}
>  	}
>  
>  	/* word and long word swap */
> -- 
> 1.7.2.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

---
 drivers/video/sh_mobile_lcdcfb.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

Comments

Magnus Damm June 9, 2011, 4:56 a.m. UTC | #1
Hi Morimoto-san,

This is already fixed in linux-2.6 git by:

commit 554cc1028603587e28ae49e9594b1508df5f29aa
Author: Paul Mundt <lethal@linux-sh.org>
Date:   Thu May 26 15:01:22 2011 +0900

    fbdev: sh_mobile_lcdcfb: Fix up fallout from MERAM changes.

/ magnus

On Thu, Jun 9, 2011 at 1:28 PM, Kuninori Morimoto
<kuninori.morimoto.gx@renesas.com> wrote:
>
> Dear Paul, Guennadi
>
> I cannot compile on current paul/master.
> below patch seems breaks compile.
> "ret" is still needed.
>
> Can you revert it or apply attached patch ?
>
> At Thu, 05 May 2011 18:32:36 +0200 (CEST),
> Guennadi wrote:
>>
>> The "ret" variable in sh_mobile_lcdc_start() is only used at one
>> location, move its definition to the inner-most scope.
>>
>> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
>> ---
>>  drivers/video/sh_mobile_lcdcfb.c |   12 ++++++------
>>  1 files changed, 6 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
>> index 9bcc61b..466834c 100644
>> --- a/drivers/video/sh_mobile_lcdcfb.c
>> +++ b/drivers/video/sh_mobile_lcdcfb.c
>> @@ -469,7 +469,6 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
>>       int bpp = 0;
>>       unsigned long ldddsr;
>>       int k, m;
>> -     int ret = 0;
>>
>>       /* enable clocks before accessing the hardware */
>>       for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
>> @@ -538,11 +537,12 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
>>               lcdc_write_chan(ch, LDPMR, 0);
>>
>>               board_cfg = &ch->cfg.board_cfg;
>> -             if (board_cfg->setup_sys)
>> -                     ret = board_cfg->setup_sys(board_cfg->board_data, ch,
>> -                                                &sh_mobile_lcdc_sys_bus_ops);
>> -             if (ret)
>> -                     return ret;
>> +             if (board_cfg->setup_sys) {
>> +                     int ret = board_cfg->setup_sys(board_cfg->board_data,
>> +                                             ch, &sh_mobile_lcdc_sys_bus_ops);
>> +                     if (ret)
>> +                             return ret;
>> +             }
>>       }
>>
>>       /* word and long word swap */
>> --
>> 1.7.2.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
> ---
>  drivers/video/sh_mobile_lcdcfb.c |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
> index 404c03b..d0a03ef 100644
> --- a/drivers/video/sh_mobile_lcdcfb.c
> +++ b/drivers/video/sh_mobile_lcdcfb.c
> @@ -617,6 +617,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
>                        unsigned long icb_addr_y, icb_addr_c;
>                        int icb_pitch;
>                        int pf;
> +                       int ret;
>
>                        cfg = ch->cfg.meram_cfg;
>                        mdev = priv->meram_dev;
> --
>
>
>
> Best regards
> --
> Kuninori Morimoto
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kuninori Morimoto June 9, 2011, 5:20 a.m. UTC | #2
Hi Magnus

Thank you !!

> Hi Morimoto-san,
> 
> This is already fixed in linux-2.6 git by:
> 
> commit 554cc1028603587e28ae49e9594b1508df5f29aa
> Author: Paul Mundt <lethal@linux-sh.org>
> Date:   Thu May 26 15:01:22 2011 +0900
> 
>     fbdev: sh_mobile_lcdcfb: Fix up fallout from MERAM changes.
> 
> / magnus
> 
> On Thu, Jun 9, 2011 at 1:28 PM, Kuninori Morimoto
> <kuninori.morimoto.gx@renesas.com> wrote:
> >
> > Dear Paul, Guennadi
> >
> > I cannot compile on current paul/master.
> > below patch seems breaks compile.
> > "ret" is still needed.
> >
> > Can you revert it or apply attached patch ?
> >
> > At Thu, 05 May 2011 18:32:36 +0200 (CEST),
> > Guennadi wrote:
> >>
> >> The "ret" variable in sh_mobile_lcdc_start() is only used at one
> >> location, move its definition to the inner-most scope.
> >>
> >> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> >> ---
> >>  drivers/video/sh_mobile_lcdcfb.c |   12 ++++++------
> >>  1 files changed, 6 insertions(+), 6 deletions(-)
> >>
> >> diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
> >> index 9bcc61b..466834c 100644
> >> --- a/drivers/video/sh_mobile_lcdcfb.c
> >> +++ b/drivers/video/sh_mobile_lcdcfb.c
> >> @@ -469,7 +469,6 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
> >>       int bpp = 0;
> >>       unsigned long ldddsr;
> >>       int k, m;
> >> -     int ret = 0;
> >>
> >>       /* enable clocks before accessing the hardware */
> >>       for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
> >> @@ -538,11 +537,12 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
> >>               lcdc_write_chan(ch, LDPMR, 0);
> >>
> >>               board_cfg = &ch->cfg.board_cfg;
> >> -             if (board_cfg->setup_sys)
> >> -                     ret = board_cfg->setup_sys(board_cfg->board_data, ch,
> >> -                                                &sh_mobile_lcdc_sys_bus_ops);
> >> -             if (ret)
> >> -                     return ret;
> >> +             if (board_cfg->setup_sys) {
> >> +                     int ret = board_cfg->setup_sys(board_cfg->board_data,
> >> +                                             ch, &sh_mobile_lcdc_sys_bus_ops);
> >> +                     if (ret)
> >> +                             return ret;
> >> +             }
> >>       }
> >>
> >>       /* word and long word swap */
> >> --
> >> 1.7.2.5
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >
> > ---
> >  drivers/video/sh_mobile_lcdcfb.c |    1 +
> >  1 files changed, 1 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
> > index 404c03b..d0a03ef 100644
> > --- a/drivers/video/sh_mobile_lcdcfb.c
> > +++ b/drivers/video/sh_mobile_lcdcfb.c
> > @@ -617,6 +617,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
> >                        unsigned long icb_addr_y, icb_addr_c;
> >                        int icb_pitch;
> >                        int pf;
> > +                       int ret;
> >
> >                        cfg = ch->cfg.meram_cfg;
> >                        mdev = priv->meram_dev;
> > --
> >
> >
> >
> > Best regards
> > --
> > Kuninori Morimoto
> >
> >

Best regards
--
Kuninori Morimoto
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 404c03b..d0a03ef 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -617,6 +617,7 @@  static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 			unsigned long icb_addr_y, icb_addr_c;
 			int icb_pitch;
 			int pf;
+			int ret;
 
 			cfg = ch->cfg.meram_cfg;
 			mdev = priv->meram_dev;