mbox series

[0/5] ixp4xx: add welltech-epbx100

Message ID 20210504193457.4008384-1-clabbe@baylibre.com (mailing list archive)
Headers show
Series ixp4xx: add welltech-epbx100 | expand

Message

Corentin Labbe May 4, 2021, 7:34 p.m. UTC
The welltech epbx100 is a small IP PBX board.
It ship an Intel IXDPG425 Network Gateway Reference (IXP42X 533MHz) SoC.
Original image ran an old 2.4.31 but upgrading to recent kernel was
easy.
It misses a working network interfaces but its current state is
sufficient to work on my interest, its crypto device.

More information on the board could be found on http://kernel.montjoie.ovh/welltech-epbx100.html

Corentin Labbe (5):
  ARM: ixp4xx_defconfig: add CONFIG_SERIAL_OF_PLATFORM
  ARM: ixp4xx_defconfig: add MTD_PHYSMAP
  dt-bindings: add vendor prefix for welltech
  dt-bindings: arm: intel-ixp4xx: add welltech,epbx100
  ARM: dts: add intel-ixp42x-welltech-epbx100

 .../devicetree/bindings/arm/intel-ixp4xx.yaml |  1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
 arch/arm/boot/dts/Makefile                    |  1 +
 .../dts/intel-ixp42x-welltech-epbx100.dts     | 76 +++++++++++++++++++
 arch/arm/configs/ixp4xx_defconfig             |  3 +
 5 files changed, 83 insertions(+)
 create mode 100644 arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts