diff mbox series

[v4,4/5] ARM: mmp: replace setup_irq() by request_irq()

Message ID 20200327124437.4239-1-afzal.mohd.ma@gmail.com (mailing list archive)
State Mainlined
Commit 2fcf53350810d0e2af9ef57a57957c6c739c5647
Headers show
Series [v4,1/5] ARM: ep93xx: Replace setup_irq() by request_irq() | expand

Commit Message

afzal mohammed March 27, 2020, 12:44 p.m. UTC
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Lubomir Rintel <lkundrak@v3.sk>

 * Add received tags

 * Split out from series, also split out from ARM patch to subarch level
	as Thomas suggested to take it thr' respective maintainers
 * Modify string displayed in case of error as suggested by Thomas
 * Re-arrange code as required to improve readability
 * Remove irrelevant parts from commit message & improve
 * Replace pr_err("request_irq() on %s failed" by
           pr_err("%s: request_irq() failed"
 * Commit message massage

 arch/arm/mach-mmp/time.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)
diff mbox series


diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index c65cfc1ad99b..049a65f47b42 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -175,13 +175,6 @@  static void __init timer_config(void)
 	__raw_writel(0x2, mmp_timer_base + TMR_CER);
-static struct irqaction timer_irq = {
-	.name		= "timer",
-	.handler	= timer_interrupt,
-	.dev_id		= &ckevt,
 void __init mmp_timer_init(int irq, unsigned long rate)
@@ -190,7 +183,9 @@  void __init mmp_timer_init(int irq, unsigned long rate)
 	ckevt.cpumask = cpumask_of(0);
-	setup_irq(irq, &timer_irq);
+	if (request_irq(irq, timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"timer", &ckevt))
+		pr_err("Failed to request irq %d (timer)\n", irq);
 	clocksource_register_hz(&cksrc, rate);
 	clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);