mbox series

[GIT,PULL,5/6] arm64: tegra: Changes for v5.10-rc1

Message ID 20200918150303.3938852-5-thierry.reding@gmail.com
State Accepted
Commit 639448912ba17a9af9e759efbab37d36c6e29dea
Headers show
Series [GIT,PULL,1/6] dt-bindings: Changes for v5.10-rc1 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-5.10-arm64-dt

Message

Thierry Reding Sept. 18, 2020, 3:03 p.m. UTC
Hi ARM SoC maintainers,

The following changes since commit 9123e3a74ec7b934a4a099e98af6a61c2f80bbf5:

  Linux 5.9-rc1 (2020-08-16 13:04:57 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-5.10-arm64-dt

for you to fetch changes up to 639448912ba17a9af9e759efbab37d36c6e29dea:

  arm64: tegra: Initial Tegra234 VDK support (2020-09-18 15:58:07 +0200)

Thanks,
Thierry

----------------------------------------------------------------
arm64: tegra: Changes for v5.10-rc1

This set of changes fixes some minor issues in existing device trees and
adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled
to allow them to be detected by software.

It also adds support for the Tegra234 VDK board, which is a pre-silicon
platform for the upcoming Orin SoC.

----------------------------------------------------------------
Jon Hunter (2):
      arm64: tegra: Add label properties for EEPROMs
      arm64: tegra: Populate EEPROMs for Jetson Xavier NX

Sameer Pujar (2):
      arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano
      arm64: tegra: Add DT binding for AHUB components

Thierry Reding (8):
      arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier
      arm64: tegra: Wire up pinctrl states for all DPAUX controllers
      arm64: tegra: Add VBUS supply for micro USB port on Jetson Nano
      arm64: tegra: Disable SD card write-protection on Jetson Nano
      arm64: tegra: Describe display controller outputs for Tegra210
      arm64: tegra: Use valid PWM period for VDD_GPU on Tegra210
      arm64: tegra: Properly size register regions for GPU on Tegra194
      arm64: tegra: Initial Tegra234 VDK support

 arch/arm64/boot/dts/nvidia/Makefile                |   1 +
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts |   1 +
 arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi     |   1 +
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           | 217 +++++++++++++++++-
 arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi     |  16 ++
 arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts |  14 ++
 .../dts/nvidia/tegra194-p3509-0000+p3668-0000.dts  |  14 ++
 .../arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi |  16 ++
 arch/arm64/boot/dts/nvidia/tegra194.dtsi           | 247 ++++++++++++++++++++-
 arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi     |   3 +-
 arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts |   1 +
 arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts |  29 ++-
 arch/arm64/boot/dts/nvidia/tegra210.dtsi           | 150 ++++++++++++-
 arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts    |  40 ++++
 arch/arm64/boot/dts/nvidia/tegra234.dtsi           | 189 ++++++++++++++++
 drivers/soc/tegra/Kconfig                          |  10 +
 include/dt-bindings/clock/tegra234-clock.h         |  14 ++
 include/dt-bindings/reset/tegra234-reset.h         |  10 +
 18 files changed, 961 insertions(+), 12 deletions(-)
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
 create mode 100644 arch/arm64/boot/dts/nvidia/tegra234.dtsi
 create mode 100644 include/dt-bindings/clock/tegra234-clock.h
 create mode 100644 include/dt-bindings/reset/tegra234-reset.h