mbox series

[GIT,PULL,5/6] arm64: tegra: Device tree changes for v5.11-rc1

Message ID 20201127144329.124891-5-thierry.reding@gmail.com (mailing list archive)
State Accepted
Commit 914b8de3dd9e910b45418744d6bc0c1b6fd591b1
Headers show
Series [GIT,PULL,1/6] dt-bindings: Changes for v5.11-rc1 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-5.11-arm64-dt

Message

Thierry Reding Nov. 27, 2020, 2:43 p.m. UTC
Hi ARM SoC maintainers,

The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:

  Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-5.11-arm64-dt

for you to fetch changes up to 48f6e195039486bc303118948f49a9873acc888f:

  arm64: tegra: Fix Tegra194 HDA {clock,reset}-names ordering (2020-11-26 16:33:04 +0100)

Note that you've already pulled part of this earlier as fixes for
v5.10-rc6, but I've included the whole lot for completeness. Let me know
if that doesn't work for you and you'd rather have a completely separate
branch.

Thanks,
Thierry

----------------------------------------------------------------
arm64: tegra: Device tree changes for v5.11-rc1

These changes are mostly minor fixes across the board, but they also
enable PMUs on Tegra186 and enable SATA support on Jetson TX2.

----------------------------------------------------------------
Dipen Patel (1):
      arm64: tegra: Wrong AON HSP reg property size

JC Kuo (2):
      arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
      arm64: tegra: Add XUSB pad controller interrupt

Jon Hunter (3):
      arm64: tegra: Disable the ACONNECT for Jetson TX2
      arm64: tegra: Correct the UART for Jetson Xavier NX
      arm64: tegra: Fix Tegra234 VDK node names

Marc Zyngier (2):
      arm64: tegra: Add missing CPU PMUs on Tegra186
      arm64: tegra: Fix GIC400 missing GICH/GICV register regions

Nicolas Chauvet (3):
      arm64: tegra: Add missing hot temperatures to Tegra132 thermal-zones
      arm64: tegra: Add missing gpu-throt-level to Tegra210 soctherm
      arm64: tegra: Add missing hot temperatures to Tegra210 thermal-zones

Sameer Pujar (2):
      arm64: tegra: Rename ADMA device nodes for Tegra210
      arm64: tegra: Fix Tegra194 HDA {clock,reset}-names ordering

Sowjanya Komatineni (2):
      arm64: tegra: Change order of SATA resets for Tegra132 and Tegra210
      arm64: tegra: Enable AHCI on Jetson TX2

Thierry Reding (1):
      arm64: tegra: Hook up edp interrupt on Tegra132 SOCTHERM

Vidya Sagar (1):
      arm64: tegra: Fix DT binding for IO High Voltage entry

 arch/arm64/boot/dts/nvidia/tegra132.dtsi           | 20 +++++--
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 16 ++----
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           | 61 +++++++++++++++++++---
 .../arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi |  2 +-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi           | 19 +++----
 arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts |  2 +-
 arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi     | 20 +++----
 arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts |  2 +-
 arch/arm64/boot/dts/nvidia/tegra210-smaug.dts      |  2 +-
 arch/arm64/boot/dts/nvidia/tegra210.dtsi           | 22 ++++++--
 arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts    |  6 +--
 11 files changed, 119 insertions(+), 53 deletions(-)

Comments

Arnd Bergmann Nov. 27, 2020, 7:44 p.m. UTC | #1
On Fri, Nov 27, 2020 at 3:43 PM Thierry Reding <thierry.reding@gmail.com> wrote:
>
> Note that you've already pulled part of this earlier as fixes for
> v5.10-rc6, but I've included the whole lot for completeness. Let me know
> if that doesn't work for you and you'd rather have a completely separate
> branch.

The way you did it works best in my opinion, as it helps with bisectability
and it avoids the backmerge of a later -rc into an existing branch.

     Arnd