mbox series

[GIT,PULL,5/6] i.MX arm64 device tree change for 5.11

Message ID 20201202142717.9262-5-shawnguo@kernel.org (mailing list archive)
State Queued
Headers show
Series [GIT,PULL,1/6] i.MX drivers change for 5.11 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.11

Message

Shawn Guo Dec. 2, 2020, 2:27 p.m. UTC
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:

  Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.11

for you to fetch changes up to 0b84862688951ad5f6ad8990dd9a44e1363c4a2b:

  arm64: dts: imx8mm-beacon-som: Assign PMIC clock (2020-12-01 09:49:49 +0800)

----------------------------------------------------------------
i.MX arm64 device tree changes for 5.11:

- New board support: LX2162A QDS, Kontron i.MX8M Mini SoMs and
  baseboards.
- A number of patches from Adam Ford to add various audio devices for
  i.MX8MM/MN and update imx8mm-beacon-som board on QSPI NOR and RTC.
- Correct WDOG_B pin configuration for i.MX8MM/MN/MP.
- A series from Ioana Ciornei complete the MAC/PCS/PHY representation
  on DPAA2 devices.
- Add PMU device for i.MX8MP/MN.
- Add IR and CAN support for i.MX8MP/MN/MM EVK board.
- Adjust GIC CPU mask to match number of CPUs for i.MX8MP/MN/MM.
- A series of patch from Michael Walle to update LS1028A support with
  addition of CAN and OPTEE, also ENETC PTP and FlexSPI clock input
  correction.
- Add SPDIF sound card support on imx8mq-evk board.
- Misc random updates and device additions.

----------------------------------------------------------------
Adam Ford (11):
      arm64: dts: imx8mm-beacon-som: Configure supplies on secondary cpus
      arm64: dts: imx8mm-beacon-som: Add QSPI NOR flash support
      arm64: dts: imx8mm: Add support for micfil
      arm64: dts: imx8mm: Add node for SPDIF
      arm64: dts: imx8mm-beacon-som: Fix whitespace issue
      arm64: dts: imx8mn: Enable Asynchronous Sample Rate Converter
      arm64: dts: imx8mn: Add SAI nodes
      arm64: dts: imx8mn: Add support for micfil
      arm64: dts: imx8mn: Add node for SPDIF
      arm64: dts: imx8mm-beacon-som: Configure RTC aliases
      arm64: dts: imx8mm-beacon-som: Assign PMIC clock

Anson Huang (4):
      arm64: dts: imx8mn-evk: Add cpu-supply to enable cpufreq
      arm64: dts: imx8mm: Correct WDOG_B pin configuration
      arm64: dts: imx8mn: Correct WDOG_B pin configuration
      arm64: dts: imx8mp-evk: Correct WDOG_B pin configuration

Frieder Schrempf (1):
      arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards

Ioana Ciornei (9):
      arm64: dts: ls1088a: add external MDIO device nodes
      arm64: dts: ls1088ardb: add QSGMII PHY nodes
      arm64: dts: ls1088ardb: add necessary DTS nodes for DPMAC2
      arm64: dts: ls208xa: add the external MDIO nodes
      arm64: dts: ls2088ardb: add PHY nodes for the CS4340 PHYs
      arm64: dts: ls2088ardb: add PHY nodes for the AQR405 PHYs
      arm64: dts: ls208xa: add PCS MDIO and PCS PHY nodes
      arm64: dts: lx2160a: add PCS MDIO and PCS PHY nodes
      arm64: dts: lx2160ardb: add nodes for the AQR107 PHYs

Jacky Bai (2):
      arm64: dts: freescale: Add pmu support on imx8mp
      arm64: dts: freescale: Add pmu support on imx8mn

Joakim Zhang (4):
      arm64: dts: imx8mp-evk: add CAN support
      arm64: dts: imx8mq-evk: add linux,autosuspend-period property for IR
      arm64: dts: imx8mm-evk: add IR support
      arm64: dts: imx8mn-evk: add IR support

Krzysztof Kozlowski (5):
      arm64: dts: imx8mq-librem5: align GPIO hog names with dtschema
      arm64: dts: freescale: align watchdog node name with dtschema
      arm64: dts: imx8mm: adjust GIC CPU mask to match number of CPUs
      arm64: dts: imx8mn: adjust GIC CPU mask to match number of CPUs
      arm64: dts: imx8mp: adjust GIC CPU mask to match number of CPUs

Meenakshi Aggarwal (1):
      arm64: dts: lx2160a: add device tree for lx2162aqds board

Michael Walle (6):
      arm64: dts: ls1028a: add missing CAN nodes
      arm64: dts: freescale: sl28: add CAN node
      arm64: dts: ls1028a: fix ENETC PTP clock input
      arm64: dts: ls1028a: fix FlexSPI clock input
      arm64: dts: ls1028a: add optee node
      arm64: dts: freescale: sl28: combine SPI MTD partitions

Nathan Chancellor (1):
      arm64: dts: imx: Fix imx8mm-kontron-n801x-s.dtb target

Serge Semin (1):
      arm64: dts: layerscape: Harmonize DWC USB3 DT nodes name

Shengjiu Wang (2):
      arm64: dts: imx8mq: Configure clock rate for audio plls
      arm64: dts: imx8mq-evk: Add spdif sound card support

Vladimir Oltean (1):
      arm64: dts: ls1028a: make the eMMC and SD card controllers use fixed indices

Xiaowei Bao (1):
      arm64: dts: layerscape: Add PCIe EP node for ls1088a

Yuantian Tang (1):
      arm64: dts: freescale: update calibration table for TMU module

 arch/arm64/boot/dts/freescale/Makefile             |   2 +
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi     |  69 +++--
 .../dts/freescale/fsl-ls1028a-kontron-sl28.dts     |  18 +-
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts  |   2 +
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts  |   2 +
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi     |  30 +-
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi     |  86 +++---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi     |  72 ++---
 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts  | 119 ++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi     | 136 ++++++++-
 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts  | 120 ++++++++
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     | 278 +++++++++++++++--
 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts  |  32 ++
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     | 288 ++++++++++++++++--
 arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts  | 334 +++++++++++++++++++++
 .../boot/dts/freescale/imx8mm-beacon-som.dtsi      | 326 +++++++++++---------
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi      |  16 +-
 .../boot/dts/freescale/imx8mm-kontron-n801x-s.dts  | 322 ++++++++++++++++++++
 .../dts/freescale/imx8mm-kontron-n801x-som.dtsi    | 294 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi  |   2 +-
 arch/arm64/boot/dts/freescale/imx8mm.dtsi          |  53 +++-
 arch/arm64/boot/dts/freescale/imx8mn-evk.dts       |  32 +-
 arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi      |  16 +-
 arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi  |   2 +-
 arch/arm64/boot/dts/freescale/imx8mn.dtsi          | 158 +++++++++-
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts       |  64 +++-
 arch/arm64/boot/dts/freescale/imx8mp.dtsi          |  45 ++-
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts       |  39 +++
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi  |   2 +-
 arch/arm64/boot/dts/freescale/imx8mq.dtsi          |  68 ++++-
 30 files changed, 2681 insertions(+), 346 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi

Comments

Arnd Bergmann Dec. 8, 2020, 11:09 p.m. UTC | #1
From: Arnd Bergmann <arnd@arndb.de>

On Wed, 2 Dec 2020 22:27:16 +0800, Shawn Guo wrote:
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
> 
>   Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.11
> 
> [...]

Merged into arm/dt, thanks!

merge commit: 49d47bf9f55c8ab8d54ea857eb1b223ee45c8afc

       Arnd