diff mbox series

[v3] soc: fsl: qe: Avoid using gpio_to_desc()

Message ID 20221027081108.174662-1-linus.walleij@linaro.org (mailing list archive)
State Accepted
Commit 84582f9ed090e6a6ce9841d0309c99427c12022a
Headers show
Series [v3] soc: fsl: qe: Avoid using gpio_to_desc() | expand

Commit Message

Linus Walleij Oct. 27, 2022, 8:11 a.m. UTC
The qe gpio driver is a custom API combined GPIO and pin control
driver that exist outside of the pin control subsystem for historical
reasons.

We want to get rid of the old GPIO numberspace, so instead of
calling gpio_to_desc() we get the gpio descriptor for the requested
line from the device tree directly without passing through the
GPIO numberspace, and then we get the gpiochip from the descriptor.

Using the reference counting inside the gpio descriptor we can drop
the reference counting code in this driver. A second gpiod_get()
will not succeed.

To obtain the local hardware offset of the GPIO line, the driver
need to include the header from the gpiolib internals. This isn't
pretty but it is the lesser evil compared to keeping the code
as a roadblock to gpiolib refactoring. A proper solution would be
to rewrite the driver as a real pin control driver with a
built-in gpio_chip.

Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
SoC folks: please apply this directly for -next if it seems
OK.

ChangeLog v2->v3:
- Realize what the driver is trying to do and make a deeper
  refactoring to get at gpiolib internals.
ChangeLog v1->v2:
- Add back the <linux/of_gpio.h> include: we are using the
  mm_of_gpio_chip, which should be fixed, but not now.
---
 drivers/soc/fsl/qe/gpio.c | 66 ++++++++++++++++++---------------------
 1 file changed, 30 insertions(+), 36 deletions(-)

Comments

patchwork-bot+linux-soc@kernel.org Nov. 2, 2022, 9:20 p.m. UTC | #1
Hello:

This patch was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:

On Thu, 27 Oct 2022 10:11:08 +0200 you wrote:
> The qe gpio driver is a custom API combined GPIO and pin control
> driver that exist outside of the pin control subsystem for historical
> reasons.
> 
> We want to get rid of the old GPIO numberspace, so instead of
> calling gpio_to_desc() we get the gpio descriptor for the requested
> line from the device tree directly without passing through the
> GPIO numberspace, and then we get the gpiochip from the descriptor.
> 
> [...]

Here is the summary with links:
  - [v3] soc: fsl: qe: Avoid using gpio_to_desc()
    https://git.kernel.org/soc/soc/c/84582f9ed090

You are awesome, thank you!
diff mbox series

Patch

diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c
index 99f7de43c3c6..af9193e7e49b 100644
--- a/drivers/soc/fsl/qe/gpio.c
+++ b/drivers/soc/fsl/qe/gpio.c
@@ -14,20 +14,23 @@ 
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio/driver.h>
-/* FIXME: needed for gpio_to_chip() get rid of this */
-#include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/export.h>
 #include <soc/fsl/qe/qe.h>
+/*
+ * FIXME: this is legacy code that is accessing gpiolib internals in order
+ * to implement a custom pin controller. The proper solution is to create
+ * a real combined pin control and GPIO driver in drivers/pinctrl. However
+ * this hack is here for legacy code reasons.
+ */
+#include "../../../gpio/gpiolib.h"
 
 struct qe_gpio_chip {
 	struct of_mm_gpio_chip mm_gc;
 	spinlock_t lock;
 
-	unsigned long pin_flags[QE_PIO_PINS];
-#define QE_PIN_REQUESTED 0
-
 	/* shadowed data register to clear/set bits safely */
 	u32 cpdata;
 
@@ -144,6 +147,7 @@  struct qe_pin {
 	 * something like qe_pio_controller. Someday.
 	 */
 	struct qe_gpio_chip *controller;
+	struct gpio_desc *gpiod;
 	int num;
 };
 
@@ -160,9 +164,8 @@  struct qe_pin *qe_pin_request(struct device_node *np, int index)
 {
 	struct qe_pin *qe_pin;
 	struct gpio_chip *gc;
-	struct qe_gpio_chip *qe_gc;
+	struct gpio_desc *gpiod;
 	int err;
-	unsigned long flags;
 
 	qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
 	if (!qe_pin) {
@@ -170,38 +173,36 @@  struct qe_pin *qe_pin_request(struct device_node *np, int index)
 		return ERR_PTR(-ENOMEM);
 	}
 
-	err = of_get_gpio(np, index);
-	if (err < 0)
+	gpiod = fwnode_gpiod_get_index(of_fwnode_handle(np), NULL, index, GPIOD_ASIS, "qe");
+	if (IS_ERR(gpiod)) {
+		err = PTR_ERR(gpiod);
+		goto err0;
+	}
+	if (!gpiod) {
+		err = -EINVAL;
 		goto err0;
-	gc = gpio_to_chip(err);
+	}
+	gc = gpiod_to_chip(gpiod);
 	if (WARN_ON(!gc)) {
 		err = -ENODEV;
 		goto err0;
 	}
+	qe_pin->gpiod = gpiod;
+	qe_pin->controller = gpiochip_get_data(gc);
+	/*
+	 * FIXME: this gets the local offset on the gpio_chip so that the driver
+	 * can manipulate pin control settings through its custom API. The real
+	 * solution is to create a real pin control driver for this.
+	 */
+	qe_pin->num = gpio_chip_hwgpio(gpiod);
 
 	if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
 		pr_debug("%s: tried to get a non-qe pin\n", __func__);
+		gpiod_put(gpiod);
 		err = -EINVAL;
 		goto err0;
 	}
-
-	qe_gc = gpiochip_get_data(gc);
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	err -= gc->base;
-	if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
-		qe_pin->controller = qe_gc;
-		qe_pin->num = err;
-		err = 0;
-	} else {
-		err = -EBUSY;
-	}
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-
-	if (!err)
-		return qe_pin;
+	return qe_pin;
 err0:
 	kfree(qe_pin);
 	pr_debug("%s failed with status %d\n", __func__, err);
@@ -219,14 +220,7 @@  EXPORT_SYMBOL(qe_pin_request);
  */
 void qe_pin_free(struct qe_pin *qe_pin)
 {
-	struct qe_gpio_chip *qe_gc = qe_pin->controller;
-	unsigned long flags;
-	const int pin = qe_pin->num;
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-	test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]);
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-
+	gpiod_put(qe_pin->gpiod);
 	kfree(qe_pin);
 }
 EXPORT_SYMBOL(qe_pin_free);