new file mode 100644
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: LGPL-2.1
+
+include utils.mk
+
+# This Makefile and manpage XSL files were taken from libtracefs
+# and modified
+
+
+MAN1_TXT= \
+ $(wildcard rtla-*.txt) \
+ rtla.txt
+
+MAN_TXT = $(MAN1_TXT)
+_MAN_XML=$(patsubst %.txt,%.xml,$(MAN_TXT))
+_MAN_HTML=$(patsubst %.txt,%.html,$(MAN_TXT))
+_DOC_MAN1=$(patsubst %.txt,%.m,$(MAN1_TXT))
+
+MAN_XML=$(addprefix $(OUTPUT),$(_MAN_XML))
+MAN_HTML=$(addprefix $(OUTPUT),$(_MAN_HTML))
+DOC_MAN1=$(addprefix $(OUTPUT),$(_DOC_MAN1))
+
+# Make the path relative to DESTDIR, not prefix
+ifndef DESTDIR
+prefix?=$(HOME)
+endif
+bindir?=$(prefix)/bin
+htmldir?=$(prefix)/share/doc/rtla-doc
+pdfdir?=$(prefix)/share/doc/rtla-doc
+mandir?=$(prefix)/share/man
+man1dir=$(mandir)/man1
+
+ASCIIDOC=asciidoc
+ASCIIDOC_EXTRA = --unsafe -f asciidoc.conf
+ASCIIDOC_HTML = xhtml11
+MANPAGE_XSL = manpage-normal.xsl
+XMLTO_EXTRA = --skip-validation
+INSTALL?=install
+RM ?= rm -f
+
+ifdef USE_ASCIIDOCTOR
+ASCIIDOC = asciidoctor
+ASCIIDOC_EXTRA = -a compat-mode
+ASCIIDOC_EXTRA += -I. -rasciidoctor-extensions
+ASCIIDOC_EXTRA += -a mansource="rtla" -a manmanual="rtla Manual"
+ASCIIDOC_HTML = xhtml5
+endif
+
+ASCIIDOC_INSTALLED := $(shell command -v $(ASCIIDOC) 2> /dev/null)
+ifndef ASCIIDOC_INSTALLED
+ missing_tools += $(ASCIIDOC)
+endif
+
+XMLTO=xmlto
+XMLTO_INSTALLED := $(shell command -v $(XMLTO) 2> /dev/null)
+ifndef XMLTO_INSTALLED
+ missing_tools += $(XMLTO)
+endif
+
+#
+# For asciidoc ...
+# -7.1.2, no extra settings are needed.
+# 8.0-, set ASCIIDOC8.
+#
+
+#
+# For docbook-xsl ...
+# -1.68.1, set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0)
+# 1.69.0, no extra settings are needed?
+# 1.69.1-1.71.0, set DOCBOOK_SUPPRESS_SP?
+# 1.71.1, no extra settings are needed?
+# 1.72.0, set DOCBOOK_XSL_172.
+# 1.73.0-, set ASCIIDOC_NO_ROFF
+#
+
+#
+# If you had been using DOCBOOK_XSL_172 in an attempt to get rid
+# of 'the ".ft C" problem' in your generated manpages, and you
+# instead ended up with weird characters around callouts, try
+# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8).
+#
+
+ifdef ASCIIDOC8
+ASCIIDOC_EXTRA += -a asciidoc7compatible
+endif
+ifdef DOCBOOK_XSL_172
+ASCIIDOC_EXTRA += -a rtla-asciidoc-no-roff
+MANPAGE_XSL = manpage-1.72.xsl
+else
+ ifdef ASCIIDOC_NO_ROFF
+ # docbook-xsl after 1.72 needs the regular XSL, but will not
+ # pass-thru raw roff codes from asciidoc.conf, so turn them off.
+ ASCIIDOC_EXTRA += -a rtla-asciidoc-no-roff
+ endif
+endif
+ifdef MAN_BOLD_LITERAL
+XMLTO_EXTRA += -m manpage-bold-literal.xsl
+endif
+ifdef DOCBOOK_SUPPRESS_SP
+XMLTO_EXTRA += -m manpage-suppress-sp.xsl
+endif
+
+SHELL_PATH ?= $(SHELL)
+# Shell quote;
+SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
+
+DESTDIR ?=
+DESTDIR_SQ = '$(subst ','\'',$(DESTDIR))'
+
+export DESTDIR DESTDIR_SQ
+
+QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir
+QUIET_SUBDIR1 =
+
+ifneq ($(findstring $(MAKEFLAGS),w),w)
+PRINT_DIR = --no-print-directory
+else # "make -w"
+NO_SUBDIR = :
+endif
+
+ifneq ($(findstring $(MAKEFLAGS),s),s)
+ifneq ($(V),1)
+ QUIET_ASCIIDOC = @echo ' ASCIIDOC '$@;
+ QUIET_XMLTO = @echo ' XMLTO '$@;
+ QUIET_SUBDIR0 = +@subdir=
+ QUIET_SUBDIR1 = ;$(NO_SUBDIR) \
+ echo ' SUBDIR ' $$subdir; \
+ $(MAKE) $(PRINT_DIR) -C $$subdir
+ export V
+endif
+endif
+
+all: check-man-tools html man1
+
+man: man1
+man1: $(DOC_MAN1)
+
+html: $(MAN_HTML) $(MAN1_HTML)
+
+$(MAN_HTML) $(MAN1_HTML) $(DOC_MAN1): asciidoc.conf
+
+install: check-man-tools install-man install-html
+
+check-man-tools:
+ifdef missing_tools
+ $(error "You need to install $(missing_tools) for man pages")
+endif
+
+install-%.1: $(OUTPUT)%.1
+ $(Q)$(call do_install,$<,$(man1dir),644);
+
+do-install-man: man $(addprefix install-,$(wildcard $(OUTPUT)*.1))
+
+install-man: man
+ $(Q)$(MAKE) -C . do-install-man
+
+install-%.txt: $(OUTPUT)%.html
+ $(Q)$(call do_install,$<,$(htmldir),644);
+
+install-%.txt.1: $(OUTPUT)%.html
+ $(Q)$(call do_install,$<,$(htmldir),644);
+
+do-install-html: html $(addprefix install-,$(wildcard *.txt)) $(addprefix install-,$(wildcard *.txt.1))
+
+install-html: html do-install-html
+
+uninstall: uninstall-man uninstall-html
+
+uninstall-man:
+ $(Q)$(RM) $(addprefix $(DESTDIR)$(man1dir)/,$(DOC_MAN1))
+
+uninstall-html:
+ $(Q)$(RM) $(addprefix $(DESTDIR)$(htmldir)/,$(MAN_HTML)) $(addprefix $(DESTDIR)$(htmldir)/,$(MAN1_HTML))
+
+ifdef missing_tools
+ DO_INSTALL_MAN = $(warning Please install $(missing_tools) to have the man pages installed)
+else
+ DO_INSTALL_MAN = do-install-man
+endif
+
+CLEAN_FILES = \
+ $(MAN_XML) $(addsuffix +,$(MAN_XML)) \
+ $(MAN_HTML) $(addsuffix +,$(MAN_HTML)) \
+ $(DOC_MAN1) *.1 *.m
+
+clean:
+ $(Q) $(RM) $(CLEAN_FILES)
+
+ifdef USE_ASCIIDOCTOR
+$(OUTPUT)%.1 : $(OUTPUT)%.txt.1
+ $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
+ $(ASCIIDOC) -b manpage -d manpage \
+ $(ASCIIDOC_EXTRA) -artla_version=$(TRACEFS_VERSION) -o $@+ $< && \
+ mv $@+ $@
+endif
+
+$(OUTPUT)%.m : $(OUTPUT)%.xml
+ $(QUIET_XMLTO)$(RM) $@ && \
+ $(XMLTO) -o $(OUTPUT). -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $<; \
+ touch $@
+
+$(OUTPUT)%.xml : %.txt
+ $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
+ $(ASCIIDOC) -b docbook -d manpage \
+ $(ASCIIDOC_EXTRA) -artla_version=$(TRACEFS_VERSION) -o $@+ $< && \
+ mv $@+ $@
+
+$(OUTPUT)%.xml : %.txt.1
+ $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
+ $(ASCIIDOC) -b docbook -d manpage \
+ $(ASCIIDOC_EXTRA) -artla_version=$(TRACEFS_VERSION) -o $@+ $< && \
+ mv $@+ $@
+
+$(MAN_HTML): $(OUTPUT)%.html : %.txt
+ $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
+ $(ASCIIDOC) -b $(ASCIIDOC_HTML) -d manpage \
+ $(ASCIIDOC_EXTRA) -artla_version=$(TRACEFS_VERSION) -o $@+ $< && \
+ mv $@+ $@
+
+$(MAN1_HTML): $(OUTPUT)%.html : %.txt.1
+ $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
+ $(ASCIIDOC) -b $(ASCIIDOC_HTML) -d manpage \
+ $(ASCIIDOC_EXTRA) -artla_version=$(TRACEFS_VERSION) -o $@+ $< && \
+ mv $@+ $@
new file mode 100644
@@ -0,0 +1,118 @@
+## linktep: macro
+#
+# Usage: linktep:command[manpage-section]
+#
+# Note, {0} is the manpage section, while {target} is the command.
+#
+# Show TEP link as: <command>(<section>); if section is defined, else just show
+# the command.
+
+[macros]
+(?su)[\\]?(?P<name>linktep):(?P<target>\S*?)\[(?P<attrlist>.*?)\]=
+
+[attributes]
+asterisk=*
+plus=+
+caret=^
+startsb=[
+endsb=]
+tilde=~
+
+ifdef::backend-docbook[]
+[linktep-inlinemacro]
+{0%{target}}
+{0#<citerefentry>}
+{0#<refentrytitle>{target}</refentrytitle><manvolnum>{0}</manvolnum>}
+{0#</citerefentry>}
+endif::backend-docbook[]
+
+ifdef::backend-docbook[]
+ifndef::tep-asciidoc-no-roff[]
+# "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this.
+# v1.72 breaks with this because it replaces dots not in roff requests.
+[listingblock]
+<example><title>{title}</title>
+<literallayout>
+ifdef::doctype-manpage[]
+endif::doctype-manpage[]
+|
+ifdef::doctype-manpage[]
+endif::doctype-manpage[]
+</literallayout>
+{title#}</example>
+endif::tep-asciidoc-no-roff[]
+
+ifdef::tep-asciidoc-no-roff[]
+ifdef::doctype-manpage[]
+# The following two small workarounds insert a simple paragraph after screen
+[listingblock]
+<example><title>{title}</title>
+<literallayout>
+|
+</literallayout><simpara></simpara>
+{title#}</example>
+
+[verseblock]
+<formalpara{id? id="{id}"}><title>{title}</title><para>
+{title%}<literallayout{id? id="{id}"}>
+{title#}<literallayout>
+|
+</literallayout>
+{title#}</para></formalpara>
+{title%}<simpara></simpara>
+endif::doctype-manpage[]
+endif::tep-asciidoc-no-roff[]
+endif::backend-docbook[]
+
+ifdef::doctype-manpage[]
+ifdef::backend-docbook[]
+[header]
+template::[header-declarations]
+<refentry>
+<refmeta>
+<refentrytitle>{mantitle}</refentrytitle>
+<manvolnum>{manvolnum}</manvolnum>
+<refmiscinfo class="source">rtla</refmiscinfo>
+<refmiscinfo class="version">{rtla_version}</refmiscinfo>
+<refmiscinfo class="manual">RTLA Manual</refmiscinfo>
+</refmeta>
+<refnamediv>
+ <refname>{manname1}</refname>
+ <refname>{manname2}</refname>
+ <refname>{manname3}</refname>
+ <refname>{manname4}</refname>
+ <refname>{manname5}</refname>
+ <refname>{manname6}</refname>
+ <refname>{manname7}</refname>
+ <refname>{manname8}</refname>
+ <refname>{manname9}</refname>
+ <refname>{manname10}</refname>
+ <refname>{manname11}</refname>
+ <refname>{manname12}</refname>
+ <refname>{manname13}</refname>
+ <refname>{manname14}</refname>
+ <refname>{manname15}</refname>
+ <refname>{manname16}</refname>
+ <refname>{manname17}</refname>
+ <refname>{manname18}</refname>
+ <refname>{manname19}</refname>
+ <refname>{manname20}</refname>
+ <refname>{manname21}</refname>
+ <refname>{manname22}</refname>
+ <refname>{manname23}</refname>
+ <refname>{manname24}</refname>
+ <refname>{manname25}</refname>
+ <refname>{manname26}</refname>
+ <refname>{manname27}</refname>
+ <refname>{manname28}</refname>
+ <refname>{manname29}</refname>
+ <refname>{manname30}</refname>
+ <refpurpose>{manpurpose}</refpurpose>
+</refnamediv>
+endif::backend-docbook[]
+endif::doctype-manpage[]
+
+ifdef::backend-xhtml11[]
+[linktep-inlinemacro]
+<a href="{target}.html">{target}{0?({0})}</a>
+endif::backend-xhtml11[]
new file mode 100644
@@ -0,0 +1,35 @@
+<!-- manpage-base.xsl:
+ special formatting for manpages rendered from asciidoc+docbook -->
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+ version="1.0">
+
+<!-- these params silence some output from xmlto -->
+<xsl:param name="man.output.quietly" select="1"/>
+<xsl:param name="refentry.meta.get.quietly" select="1"/>
+
+<!-- convert asciidoc callouts to man page format;
+ git.docbook.backslash and git.docbook.dot params
+ must be supplied by another XSL file or other means -->
+<xsl:template match="co">
+ <xsl:value-of select="concat(
+ $git.docbook.backslash,'fB(',
+ substring-after(@id,'-'),')',
+ $git.docbook.backslash,'fR')"/>
+</xsl:template>
+<xsl:template match="calloutlist">
+ <xsl:value-of select="$git.docbook.dot"/>
+ <xsl:text>sp </xsl:text>
+ <xsl:apply-templates/>
+ <xsl:text> </xsl:text>
+</xsl:template>
+<xsl:template match="callout">
+ <xsl:value-of select="concat(
+ $git.docbook.backslash,'fB',
+ substring-after(@arearefs,'-'),
+ '. ',$git.docbook.backslash,'fR')"/>
+ <xsl:apply-templates/>
+ <xsl:value-of select="$git.docbook.dot"/>
+ <xsl:text>br </xsl:text>
+</xsl:template>
+
+</xsl:stylesheet>
new file mode 100644
@@ -0,0 +1,13 @@
+<!-- manpage-normal.xsl:
+ special settings for manpages rendered from asciidoc+docbook
+ handles anything we want to keep away from docbook-xsl 1.72.0 -->
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+ version="1.0">
+
+<xsl:import href="manpage-base.xsl"/>
+
+<!-- these are the normal values for the roff control characters -->
+<xsl:param name="git.docbook.backslash">\</xsl:param>
+<xsl:param name="git.docbook.dot" >.</xsl:param>
+
+</xsl:stylesheet>
new file mode 100644
@@ -0,0 +1,56 @@
+rtla(1)
+=======
+
+NAME
+----
+rtla - Real-time Linux Analysis tool
+
+SYNOPSIS
+--------
+*rtla* COMMAND [OPTIONS]
+
+DESCRIPTION
+-----------
+The rtla(1) is a meta-tool that includes a set of commands that aims to
+analyze the real-time properties of Linux. But instead of testing Linux
+as a black box, rtla leverages kernel tracing capabilities to provide
+precise information about the properties and root causes of unexpected
+results.
+
+COMMANDS
+--------
+*osnoise*::
+Gives information about the operating system noise (osnoise).
+*timerlat*::
+Measures the irq and thread timerlat latency.
+
+OPTIONS
+-------
+*-h*, --help
+ Display the help text.
+
+For other options, see the man page for the corresponding command.
+
+SEE ALSO
+--------
+_rtla-osnoise(1)_, _rtla-timerlat(1)_.
+
+AUTHOR
+------
+Daniel Bristot de Oliveira <bristot@kernel.org>.
+
+REPORTING BUGS
+--------------
+Report bugs to <lkml@vger.kernel.org>.
+
+LICENSE
+-------
+rtla is Free Software licensed under the GNU GPLv2.
+
+RESOURCES
+---------
+
+COPYING
+-------
+Copyright \(C) 2021 Red Hat, Inc. Free use of this software is granted under
+the terms of the GNU Public License (GPL).
new file mode 100644
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: LGPL-2.1
+
+# Utils
+
+ GOBJ = $(notdir $(strip $@))
+
+
+ifeq ($(VERBOSE),1)
+ Q =
+ S =
+else
+ Q = @
+ S = -s
+endif
+
+# Use empty print_* macros if either SILENT or VERBOSE.
+ifeq ($(findstring 1,$(SILENT)$(VERBOSE)),1)
+ print_compile =
+ print_app_build =
+ print_fpic_compile =
+ print_shared_lib_compile =
+ print_plugin_obj_compile =
+ print_plugin_build =
+ print_install =
+ print_uninstall =
+ print_update =
+else
+ print_compile = echo ' COMPILE '$(GOBJ);
+ print_app_build = echo ' BUILD '$(GOBJ);
+ print_fpic_compile = echo ' COMPILE FPIC '$(GOBJ);
+ print_shared_lib_compile = echo ' COMPILE SHARED LIB '$(GOBJ);
+ print_plugin_obj_compile = echo ' COMPILE PLUGIN OBJ '$(GOBJ);
+ print_plugin_build = echo ' BUILD PLUGIN '$(GOBJ);
+ print_static_lib_build = echo ' BUILD STATIC LIB '$(GOBJ);
+ print_install = echo ' INSTALL '$1' to $(DESTDIR_SQ)$2';
+ print_uninstall = echo ' UNINSTALL $(DESTDIR_SQ)$1';
+ print_update = echo ' UPDATE '$(GOBJ);
+endif
+
+do_fpic_compile = \
+ ($(print_fpic_compile) \
+ $(CC) -c $(CPPFLAGS) $(CFLAGS) $(EXT) -fPIC $< -o $@)
+
+do_compile = \
+ ($(if $(GENERATE_PIC), $(do_fpic_compile), \
+ $(print_compile) \
+ $(CC) -c $(CPPFLAGS) $(CFLAGS) $(EXT) $< -o $@))
+
+do_app_build = \
+ ($(print_app_build) \
+ $(CC) $^ -rdynamic -o $@ $(LDFLAGS) $(CONFIG_LIBS) $(LIBS))
+
+do_build_static_lib = \
+ ($(print_static_lib_build) \
+ $(RM) $@; $(AR) rcs $@ $^)
+
+do_compile_shared_library = \
+ ($(print_shared_lib_compile) \
+ $(CC) --shared $^ '-Wl,-soname,$(1),-rpath=$$ORIGIN' -o $@ $(LIBS))
+
+do_compile_plugin_obj = \
+ ($(print_plugin_obj_compile) \
+ $(CC) -c $(CPPFLAGS) $(CFLAGS) -fPIC -o $@ $<)
+
+do_plugin_build = \
+ ($(print_plugin_build) \
+ $(CC) $(CFLAGS) $(LDFLAGS) -shared -nostartfiles -o $@ $<)
+
+do_compile_python_plugin_obj = \
+ ($(print_plugin_obj_compile) \
+ $(CC) -c $(CPPFLAGS) $(CFLAGS) $(PYTHON_DIR_SQ) $(PYTHON_INCLUDES) -fPIC -o $@ $<)
+
+do_python_plugin_build = \
+ ($(print_plugin_build) \
+ $(CC) $< -shared $(LDFLAGS) $(PYTHON_LDFLAGS) -o $@)
+
+define make_version.h
+ (echo '/* This file is automatically generated. Do not modify. */'; \
+ echo \#define VERSION_CODE $(shell \
+ expr $(VERSION) \* 256 + $(PATCHLEVEL)); \
+ echo '#define EXTRAVERSION ' $(EXTRAVERSION); \
+ echo '#define VERSION_STRING "'$(VERSION).$(PATCHLEVEL).$(EXTRAVERSION)'"'; \
+ echo '#define FILE_VERSION '$(FILE_VERSION); \
+ if [ -d $(src)/.git ]; then \
+ d=`git diff`; \
+ x=""; \
+ if [ ! -z "$$d" ]; then x="+"; fi; \
+ echo '#define VERSION_GIT "'$(shell \
+ git log -1 --pretty=format:"%H" 2>/dev/null)$$x'"'; \
+ else \
+ echo '#define VERSION_GIT "not-a-git-repo"'; \
+ fi \
+ ) > $1
+endef
+
+define update_version.h
+ ($(call make_version.h, $@.tmp); \
+ if [ -r $@ ] && cmp -s $@ $@.tmp; then \
+ rm -f $@.tmp; \
+ else \
+ $(print_update) \
+ mv -f $@.tmp $@; \
+ fi);
+endef
+
+define update_dir
+ (echo $1 > $@.tmp; \
+ if [ -r $@ ] && cmp -s $@ $@.tmp; then \
+ rm -f $@.tmp; \
+ else \
+ $(print_update) \
+ mv -f $@.tmp $@; \
+ fi);
+endef
+
+define build_prefix
+ (echo $1 > $@.tmp; \
+ if [ -r $@ ] && cmp -s $@ $@.tmp; then \
+ rm -f $@.tmp; \
+ else \
+ $(print_update) \
+ mv -f $@.tmp $@; \
+ fi);
+endef
+
+define do_install_mkdir
+ if [ ! -d '$(DESTDIR_SQ)$1' ]; then \
+ $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$1'; \
+ fi
+endef
+
+define do_install
+ $(print_install) \
+ $(call do_install_mkdir,$2); \
+ $(INSTALL) $(if $3,-m $3,) $1 '$(DESTDIR_SQ)$2'
+endef
+
+define do_install_pkgconfig_file
+ if [ -n "${pkgconfig_dir}" ]; then \
+ $(call do_install,$(PKG_CONFIG_FILE),$(pkgconfig_dir),644); \
+ else \
+ (echo Failed to locate pkg-config directory) 1>&2; \
+ fi
+endef
@@ -17,7 +17,7 @@ LIBS := -ltracefs -ltraceevent -lpthread -lprocps
SRC := $(wildcard src/*.c)
HDR := $(wildcard src/*.h)
OBJ := $(SRC:.c=.o)
-DIRS := src
+DIRS := src Documentation
FILES := Makefile
CEXT := bz2
TARBALL := $(NAME)-$(VERSION).tar.$(CEXT)
@@ -27,19 +27,20 @@ DATADIR := /usr/share
DOCDIR := $(DATADIR)/doc
MANDIR := $(DATADIR)/man
LICDIR := $(DATADIR)/licenses
+SRCTREE := $(if $(BUILD_SRC),$(BUILD_SRC),$(CURDIR))
.PHONY: all tests
all: rtla
-rtla: $(OBJ)
+rtla: $(OBJ) doc
$(CC) -o rtla $(LDFLAGS) $(OBJ) $(LIBS)
static: $(OBJ)
$(CC) -o rtla-static $(LDFLAGS) --static $(OBJ) $(LIBS) -lpthread -ldl
.PHONY: install
-install:
+install: doc_install
$(INSTALL) rtla -m 755 $(DESTDIR)$(BINDIR)
@test ! -f $(DESTDIR)$(BINDIR)/osnoise || rm $(DESTDIR)$(BINDIR)/osnoise
ln -s $(DESTDIR)$(BINDIR)/rtla $(DESTDIR)$(BINDIR)/osnoise
@@ -47,15 +48,24 @@ install:
ln -s $(DESTDIR)$(BINDIR)/rtla $(DESTDIR)$(BINDIR)/timerlat
.PHONY: clean tarball push
-clean:
+clean: doc_clean
@test ! -f rtla || rm rtla
@test ! -f rtla-static || rm rtla-static
@test ! -f src/rtla.o || rm src/rtla.o
@test ! -f $(TARBALL) || rm -f $(TARBALL)
@rm -rf *~ $(OBJ) *.tar.$(CEXT)
-tarball: clean
+tarball: clean
rm -rf $(NAME)-$(VERSION) && mkdir $(NAME)-$(VERSION)
cp -r $(DIRS) $(FILES) $(NAME)-$(VERSION)
tar $(TAROPTS) --exclude='*~' $(NAME)-$(VERSION)
rm -rf $(NAME)-$(VERSION)
+
+doc:
+ $(MAKE) -C $(SRCTREE)/Documentation all
+
+doc_clean:
+ $(MAKE) -C $(SRCTREE)/Documentation clean
+
+doc_install:
+ $(MAKE) -C $(SRCTREE)/Documentation install
Adds the basis for rtla documentation. It is based on libtracefs Documentation as suggested by Steven Rostedt. This patch also includes the rtla(1) man page. Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Tom Zanussi <zanussi@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: linux-rt-users@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> --- tools/tracing/rtla/Documentation/Makefile | 223 ++++++++++++++++++ .../tracing/rtla/Documentation/asciidoc.conf | 118 +++++++++ .../rtla/Documentation/manpage-base.xsl | 35 +++ .../rtla/Documentation/manpage-normal.xsl | 13 + tools/tracing/rtla/Documentation/rtla.txt | 56 +++++ tools/tracing/rtla/Documentation/utils.mk | 144 +++++++++++ tools/tracing/rtla/Makefile | 20 +- 7 files changed, 604 insertions(+), 5 deletions(-) create mode 100644 tools/tracing/rtla/Documentation/Makefile create mode 100644 tools/tracing/rtla/Documentation/asciidoc.conf create mode 100644 tools/tracing/rtla/Documentation/manpage-base.xsl create mode 100644 tools/tracing/rtla/Documentation/manpage-normal.xsl create mode 100644 tools/tracing/rtla/Documentation/rtla.txt create mode 100644 tools/tracing/rtla/Documentation/utils.mk