| Message ID | 20230126213123.884125-3-eajames@linux.ibm.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | fsi: Add IBM I2C Responder virtual FSI master | expand |
Hi Eddie, On Fri, 27 Jan 2023, at 08:01, Eddie James wrote: > The I2C Responder (I2CR) is an I2C device that translates I2C commands > to CFAM or SCOM operations, effectively implementing an FSI master and > bus. > > Signed-off-by: Eddie James <eajames@linux.ibm.com> > --- > drivers/fsi/Kconfig | 9 + > drivers/fsi/Makefile | 1 + > drivers/fsi/fsi-master-i2cr.c | 225 +++++++++++++++++++++++++ > include/trace/events/fsi_master_i2cr.h | 96 +++++++++++ > 4 files changed, 331 insertions(+) > create mode 100644 drivers/fsi/fsi-master-i2cr.c > create mode 100644 include/trace/events/fsi_master_i2cr.h > > diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig > index e6668a869913..999be82720c5 100644 > --- a/drivers/fsi/Kconfig > +++ b/drivers/fsi/Kconfig > @@ -62,6 +62,15 @@ config FSI_MASTER_ASPEED > > Enable it for your BMC kernel in an OpenPower or IBM Power system. > > +config FSI_MASTER_I2CR > + tristate "IBM I2C Responder virtual FSI master" > + depends on I2C > + help > + This option enables a virtual FSI master in order to access a CFAM > + behind an IBM I2C Responder (I2CR) chip. The I2CR is an I2C device > + that translates I2C commands to CFAM or SCOM operations, effectively > + implementing an FSI master and bus. > + > config FSI_SCOM > tristate "SCOM FSI client device driver" > help > diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile > index da218a1ad8e1..34dbaa1c452e 100644 > --- a/drivers/fsi/Makefile > +++ b/drivers/fsi/Makefile > @@ -4,6 +4,7 @@ obj-$(CONFIG_FSI) += fsi-core.o > obj-$(CONFIG_FSI_MASTER_HUB) += fsi-master-hub.o > obj-$(CONFIG_FSI_MASTER_ASPEED) += fsi-master-aspeed.o > obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o > +obj-$(CONFIG_FSI_MASTER_I2CR) += fsi-master-i2cr.o > obj-$(CONFIG_FSI_MASTER_AST_CF) += fsi-master-ast-cf.o > obj-$(CONFIG_FSI_SCOM) += fsi-scom.o > obj-$(CONFIG_FSI_SBEFIFO) += fsi-sbefifo.o > diff --git a/drivers/fsi/fsi-master-i2cr.c > b/drivers/fsi/fsi-master-i2cr.c > new file mode 100644 > index 000000000000..0eadc9b26063 > --- /dev/null > +++ b/drivers/fsi/fsi-master-i2cr.c > @@ -0,0 +1,225 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* Copyright (C) IBM Corporation 2023 */ > + > +#include <linux/device.h> > +#include <linux/fsi.h> > +#include <linux/i2c.h> > +#include <linux/module.h> > +#include <linux/mod_devicetable.h> > +#include <linux/mutex.h> > + > +#include "fsi-master.h" > + > +#define CREATE_TRACE_POINTS > +#include <trace/events/fsi_master_i2cr.h> > + > +#define I2CR_ADDRESS_CFAM(a) ((a) >> 2) > +#define I2CR_STATUS 0x30001 > +#define I2CR_STATUS_ERR BIT_ULL(61) > +#define I2CR_ERROR 0x30002 > + > +struct fsi_master_i2cr { > + struct fsi_master master; > + struct mutex lock; /* protect HW access */ > + struct i2c_client *client; > +}; > + > +static bool i2cr_check_parity(u32 v, bool parity) > +{ > + u32 i; > + > + for (i = 0; i < 32; ++i) { > + if (v & (1 << i)) > + parity = !parity; > + } > + > + return parity; > +} > + > +static __be32 i2cr_get_command(u32 address, bool parity) > +{ > + __be32 command; > + > + address <<= 1; > + > + if (i2cr_check_parity(address, parity)) > + address |= 1; > + > + command = cpu_to_be32(address); > + trace_i2cr_command((__force uint32_t)command); > + > + return command; > +} > + > +static int i2cr_transfer(struct i2c_client *client, u32 address, > __be64 *data) > +{ > + struct i2c_msg msgs[2]; > + __be32 command; > + int ret; > + > + command = i2cr_get_command(address, true); > + msgs[0].addr = client->addr; > + msgs[0].flags = 0; > + msgs[0].len = sizeof(command); > + msgs[0].buf = (__u8 *)&command; > + msgs[1].addr = client->addr; > + msgs[1].flags = I2C_M_RD; > + msgs[1].len = sizeof(*data); > + msgs[1].buf = (__u8 *)data; > + > + ret = i2c_transfer(client->adapter, msgs, 2); > + if (ret == 2) > + return 0; > + > + trace_i2cr_i2c_error(ret); > + > + if (ret < 0) > + return ret; > + > + return -EIO; > +} > + > +static int i2cr_check_status(struct i2c_client *client) > +{ > + __be64 status_be = 0; > + u64 status; > + int ret; > + > + ret = i2cr_transfer(client, I2CR_STATUS, &status_be); > + if (ret) > + return ret; > + > + status = be64_to_cpu(status_be); > + if (status & I2CR_STATUS_ERR) { > + __be64 error_be = 0; > + u64 error; > + > + i2cr_transfer(client, I2CR_ERROR, &error_be); > + error = be64_to_cpu(error_be); > + trace_i2cr_status_error(status, error); > + dev_err(&client->dev, "status:%016llx error:%016llx\n", status, > error); > + return -EREMOTEIO; > + } > + > + trace_i2cr_status(status); > + return 0; > +} > + > +static int i2cr_read(struct fsi_master *master, int link, uint8_t id, > uint32_t addr, void *val, > + size_t size) > +{ > + struct fsi_master_i2cr *i2cr = container_of(master, struct > fsi_master_i2cr, master); > + __be64 data = 0; > + int ret; > + > + if (link || id || (addr & 0xffff0000) || !(size == 1 || size == 2 || > size == 4)) > + return -EINVAL; > + > + mutex_lock(&i2cr->lock); > + > + ret = i2cr_transfer(i2cr->client, I2CR_ADDRESS_CFAM(addr), &data); > + if (ret) > + goto unlock; > + > + ret = i2cr_check_status(i2cr->client); > + if (ret) > + goto unlock; > + > + trace_i2cr_read(addr, size, (__force uint32_t)data); > + memcpy(val, &data, size); > + > +unlock: > + mutex_unlock(&i2cr->lock); > + return ret; > +} > + > +static int i2cr_write(struct fsi_master *master, int link, uint8_t id, > uint32_t addr, > + const void *val, size_t size) > +{ > + struct fsi_master_i2cr *i2cr = container_of(master, struct > fsi_master_i2cr, master); > + struct { > + __be32 command; > + u32 val; > + u32 rsvd; > + } __packed data = { 0, 0, 0 }; > + int ret; > + > + if (link || id || (addr & 0xffff0000) || !(size == 1 || size == 2 || > size == 4)) > + return -EINVAL; > + > + memcpy(&data.val, val, size); Still nervous about endian mixups here given the buffers in val tend to be pointers to big-endian values but data.val is native-endian (likely little-endian). It probably doesn't matter functionally given we pass the pointer to the packed struct through i2c_master_send(), but do the values come out right in the trace data? What do you think about adding some commentary outlining the value representations to help with confidence here? > + data.command = i2cr_get_command(I2CR_ADDRESS_CFAM(addr), > + i2cr_check_parity(data.val, true)); > + > + mutex_lock(&i2cr->lock); > + > + ret = i2c_master_send(i2cr->client, (const char *)&data, > sizeof(data)); > + if (ret == sizeof(data)) { > + ret = i2cr_check_status(i2cr->client); > + if (!ret) > + trace_i2cr_write(addr, size, data.val); > + } else { > + trace_i2cr_i2c_error(ret); > + > + if (ret >= 0) > + ret = -EIO; > + } The i2cr_transfer() call in i2cr_check_status() can error but that won't be traced. Is that intentional? What about this instead? ret = i2c_master_send(...) if (ret == sizeof(data)) { ret = i2cr_check_status(i2cr->client); } else { ret = -EIO; } if (ret) { trace_i2cr_i2c_error(ret); } else { trace_i2cr_write(addr, size, data.val); } Cheers, Andrew
On 1/26/23 19:25, Andrew Jeffery wrote: > Hi Eddie, > > On Fri, 27 Jan 2023, at 08:01, Eddie James wrote: >> The I2C Responder (I2CR) is an I2C device that translates I2C commands >> to CFAM or SCOM operations, effectively implementing an FSI master and >> bus. >> >> Signed-off-by: Eddie James <eajames@linux.ibm.com> >> --- >> drivers/fsi/Kconfig | 9 + >> drivers/fsi/Makefile | 1 + >> drivers/fsi/fsi-master-i2cr.c | 225 +++++++++++++++++++++++++ >> include/trace/events/fsi_master_i2cr.h | 96 +++++++++++ >> 4 files changed, 331 insertions(+) >> create mode 100644 drivers/fsi/fsi-master-i2cr.c >> create mode 100644 include/trace/events/fsi_master_i2cr.h >> >> diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig >> index e6668a869913..999be82720c5 100644 >> --- a/drivers/fsi/Kconfig >> +++ b/drivers/fsi/Kconfig >> @@ -62,6 +62,15 @@ config FSI_MASTER_ASPEED >> >> Enable it for your BMC kernel in an OpenPower or IBM Power system. >> >> +config FSI_MASTER_I2CR >> + tristate "IBM I2C Responder virtual FSI master" >> + depends on I2C >> + help >> + This option enables a virtual FSI master in order to access a CFAM >> + behind an IBM I2C Responder (I2CR) chip. The I2CR is an I2C device >> + that translates I2C commands to CFAM or SCOM operations, effectively >> + implementing an FSI master and bus. >> + >> config FSI_SCOM >> tristate "SCOM FSI client device driver" >> help >> diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile >> index da218a1ad8e1..34dbaa1c452e 100644 >> --- a/drivers/fsi/Makefile >> +++ b/drivers/fsi/Makefile >> @@ -4,6 +4,7 @@ obj-$(CONFIG_FSI) += fsi-core.o >> obj-$(CONFIG_FSI_MASTER_HUB) += fsi-master-hub.o >> obj-$(CONFIG_FSI_MASTER_ASPEED) += fsi-master-aspeed.o >> obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o >> +obj-$(CONFIG_FSI_MASTER_I2CR) += fsi-master-i2cr.o >> obj-$(CONFIG_FSI_MASTER_AST_CF) += fsi-master-ast-cf.o >> obj-$(CONFIG_FSI_SCOM) += fsi-scom.o >> obj-$(CONFIG_FSI_SBEFIFO) += fsi-sbefifo.o >> diff --git a/drivers/fsi/fsi-master-i2cr.c >> b/drivers/fsi/fsi-master-i2cr.c >> new file mode 100644 >> index 000000000000..0eadc9b26063 >> --- /dev/null >> +++ b/drivers/fsi/fsi-master-i2cr.c >> @@ -0,0 +1,225 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* Copyright (C) IBM Corporation 2023 */ >> + >> +#include <linux/device.h> >> +#include <linux/fsi.h> >> +#include <linux/i2c.h> >> +#include <linux/module.h> >> +#include <linux/mod_devicetable.h> >> +#include <linux/mutex.h> >> + >> +#include "fsi-master.h" >> + >> +#define CREATE_TRACE_POINTS >> +#include <trace/events/fsi_master_i2cr.h> >> + >> +#define I2CR_ADDRESS_CFAM(a) ((a) >> 2) >> +#define I2CR_STATUS 0x30001 >> +#define I2CR_STATUS_ERR BIT_ULL(61) >> +#define I2CR_ERROR 0x30002 >> + >> +struct fsi_master_i2cr { >> + struct fsi_master master; >> + struct mutex lock; /* protect HW access */ >> + struct i2c_client *client; >> +}; >> + >> +static bool i2cr_check_parity(u32 v, bool parity) >> +{ >> + u32 i; >> + >> + for (i = 0; i < 32; ++i) { >> + if (v & (1 << i)) >> + parity = !parity; >> + } >> + >> + return parity; >> +} >> + >> +static __be32 i2cr_get_command(u32 address, bool parity) >> +{ >> + __be32 command; >> + >> + address <<= 1; >> + >> + if (i2cr_check_parity(address, parity)) >> + address |= 1; >> + >> + command = cpu_to_be32(address); >> + trace_i2cr_command((__force uint32_t)command); >> + >> + return command; >> +} >> + >> +static int i2cr_transfer(struct i2c_client *client, u32 address, >> __be64 *data) >> +{ >> + struct i2c_msg msgs[2]; >> + __be32 command; >> + int ret; >> + >> + command = i2cr_get_command(address, true); >> + msgs[0].addr = client->addr; >> + msgs[0].flags = 0; >> + msgs[0].len = sizeof(command); >> + msgs[0].buf = (__u8 *)&command; >> + msgs[1].addr = client->addr; >> + msgs[1].flags = I2C_M_RD; >> + msgs[1].len = sizeof(*data); >> + msgs[1].buf = (__u8 *)data; >> + >> + ret = i2c_transfer(client->adapter, msgs, 2); >> + if (ret == 2) >> + return 0; >> + >> + trace_i2cr_i2c_error(ret); >> + >> + if (ret < 0) >> + return ret; >> + >> + return -EIO; >> +} >> + >> +static int i2cr_check_status(struct i2c_client *client) >> +{ >> + __be64 status_be = 0; >> + u64 status; >> + int ret; >> + >> + ret = i2cr_transfer(client, I2CR_STATUS, &status_be); >> + if (ret) >> + return ret; >> + >> + status = be64_to_cpu(status_be); >> + if (status & I2CR_STATUS_ERR) { >> + __be64 error_be = 0; >> + u64 error; >> + >> + i2cr_transfer(client, I2CR_ERROR, &error_be); >> + error = be64_to_cpu(error_be); >> + trace_i2cr_status_error(status, error); >> + dev_err(&client->dev, "status:%016llx error:%016llx\n", status, >> error); >> + return -EREMOTEIO; >> + } >> + >> + trace_i2cr_status(status); >> + return 0; >> +} >> + >> +static int i2cr_read(struct fsi_master *master, int link, uint8_t id, >> uint32_t addr, void *val, >> + size_t size) >> +{ >> + struct fsi_master_i2cr *i2cr = container_of(master, struct >> fsi_master_i2cr, master); >> + __be64 data = 0; >> + int ret; >> + >> + if (link || id || (addr & 0xffff0000) || !(size == 1 || size == 2 || >> size == 4)) >> + return -EINVAL; >> + >> + mutex_lock(&i2cr->lock); >> + >> + ret = i2cr_transfer(i2cr->client, I2CR_ADDRESS_CFAM(addr), &data); >> + if (ret) >> + goto unlock; >> + >> + ret = i2cr_check_status(i2cr->client); >> + if (ret) >> + goto unlock; >> + >> + trace_i2cr_read(addr, size, (__force uint32_t)data); >> + memcpy(val, &data, size); >> + >> +unlock: >> + mutex_unlock(&i2cr->lock); >> + return ret; >> +} >> + >> +static int i2cr_write(struct fsi_master *master, int link, uint8_t id, >> uint32_t addr, >> + const void *val, size_t size) >> +{ >> + struct fsi_master_i2cr *i2cr = container_of(master, struct >> fsi_master_i2cr, master); >> + struct { >> + __be32 command; >> + u32 val; >> + u32 rsvd; >> + } __packed data = { 0, 0, 0 }; >> + int ret; >> + >> + if (link || id || (addr & 0xffff0000) || !(size == 1 || size == 2 || >> size == 4)) >> + return -EINVAL; >> + >> + memcpy(&data.val, val, size); > Still nervous about endian mixups here given the buffers in val tend to > be pointers to big-endian values but data.val is native-endian (likely > little-endian). It probably doesn't matter functionally given we pass > the pointer to the packed struct through i2c_master_send(), but do the > values come out right in the trace data? > > What do you think about adding some commentary outlining the value > representations to help with confidence here? Yea, this is still not the cleanest. I'll either add comments or rework it a little bit. I have reworked the trace functions to get rid of any casting too. > >> + data.command = i2cr_get_command(I2CR_ADDRESS_CFAM(addr), >> + i2cr_check_parity(data.val, true)); >> + >> + mutex_lock(&i2cr->lock); >> + >> + ret = i2c_master_send(i2cr->client, (const char *)&data, >> sizeof(data)); >> + if (ret == sizeof(data)) { >> + ret = i2cr_check_status(i2cr->client); >> + if (!ret) >> + trace_i2cr_write(addr, size, data.val); >> + } else { >> + trace_i2cr_i2c_error(ret); >> + >> + if (ret >= 0) >> + ret = -EIO; >> + } > The i2cr_transfer() call in i2cr_check_status() can error but that > won't be traced. Is that intentional? What about this instead? i2cr_transfer itself traces on i2c error, so we should be covered? In your snippet below, you'll get an "i2cr_i2c_error" trace even for a failed status check, which isn't my intention for that function. Thanks for the review! Eddie > > ret = i2c_master_send(...) > if (ret == sizeof(data)) { > ret = i2cr_check_status(i2cr->client); > } else { > ret = -EIO; > } > > if (ret) { > trace_i2cr_i2c_error(ret); > } else { > trace_i2cr_write(addr, size, data.val); > } > > Cheers, > > Andrew
diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig index e6668a869913..999be82720c5 100644 --- a/drivers/fsi/Kconfig +++ b/drivers/fsi/Kconfig @@ -62,6 +62,15 @@ config FSI_MASTER_ASPEED Enable it for your BMC kernel in an OpenPower or IBM Power system. +config FSI_MASTER_I2CR + tristate "IBM I2C Responder virtual FSI master" + depends on I2C + help + This option enables a virtual FSI master in order to access a CFAM + behind an IBM I2C Responder (I2CR) chip. The I2CR is an I2C device + that translates I2C commands to CFAM or SCOM operations, effectively + implementing an FSI master and bus. + config FSI_SCOM tristate "SCOM FSI client device driver" help diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile index da218a1ad8e1..34dbaa1c452e 100644 --- a/drivers/fsi/Makefile +++ b/drivers/fsi/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_FSI) += fsi-core.o obj-$(CONFIG_FSI_MASTER_HUB) += fsi-master-hub.o obj-$(CONFIG_FSI_MASTER_ASPEED) += fsi-master-aspeed.o obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o +obj-$(CONFIG_FSI_MASTER_I2CR) += fsi-master-i2cr.o obj-$(CONFIG_FSI_MASTER_AST_CF) += fsi-master-ast-cf.o obj-$(CONFIG_FSI_SCOM) += fsi-scom.o obj-$(CONFIG_FSI_SBEFIFO) += fsi-sbefifo.o diff --git a/drivers/fsi/fsi-master-i2cr.c b/drivers/fsi/fsi-master-i2cr.c new file mode 100644 index 000000000000..0eadc9b26063 --- /dev/null +++ b/drivers/fsi/fsi-master-i2cr.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (C) IBM Corporation 2023 */ + +#include <linux/device.h> +#include <linux/fsi.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/mutex.h> + +#include "fsi-master.h" + +#define CREATE_TRACE_POINTS +#include <trace/events/fsi_master_i2cr.h> + +#define I2CR_ADDRESS_CFAM(a) ((a) >> 2) +#define I2CR_STATUS 0x30001 +#define I2CR_STATUS_ERR BIT_ULL(61) +#define I2CR_ERROR 0x30002 + +struct fsi_master_i2cr { + struct fsi_master master; + struct mutex lock; /* protect HW access */ + struct i2c_client *client; +}; + +static bool i2cr_check_parity(u32 v, bool parity) +{ + u32 i; + + for (i = 0; i < 32; ++i) { + if (v & (1 << i)) + parity = !parity; + } + + return parity; +} + +static __be32 i2cr_get_command(u32 address, bool parity) +{ + __be32 command; + + address <<= 1; + + if (i2cr_check_parity(address, parity)) + address |= 1; + + command = cpu_to_be32(address); + trace_i2cr_command((__force uint32_t)command); + + return command; +} + +static int i2cr_transfer(struct i2c_client *client, u32 address, __be64 *data) +{ + struct i2c_msg msgs[2]; + __be32 command; + int ret; + + command = i2cr_get_command(address, true); + msgs[0].addr = client->addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(command); + msgs[0].buf = (__u8 *)&command; + msgs[1].addr = client->addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(*data); + msgs[1].buf = (__u8 *)data; + + ret = i2c_transfer(client->adapter, msgs, 2); + if (ret == 2) + return 0; + + trace_i2cr_i2c_error(ret); + + if (ret < 0) + return ret; + + return -EIO; +} + +static int i2cr_check_status(struct i2c_client *client) +{ + __be64 status_be = 0; + u64 status; + int ret; + + ret = i2cr_transfer(client, I2CR_STATUS, &status_be); + if (ret) + return ret; + + status = be64_to_cpu(status_be); + if (status & I2CR_STATUS_ERR) { + __be64 error_be = 0; + u64 error; + + i2cr_transfer(client, I2CR_ERROR, &error_be); + error = be64_to_cpu(error_be); + trace_i2cr_status_error(status, error); + dev_err(&client->dev, "status:%016llx error:%016llx\n", status, error); + return -EREMOTEIO; + } + + trace_i2cr_status(status); + return 0; +} + +static int i2cr_read(struct fsi_master *master, int link, uint8_t id, uint32_t addr, void *val, + size_t size) +{ + struct fsi_master_i2cr *i2cr = container_of(master, struct fsi_master_i2cr, master); + __be64 data = 0; + int ret; + + if (link || id || (addr & 0xffff0000) || !(size == 1 || size == 2 || size == 4)) + return -EINVAL; + + mutex_lock(&i2cr->lock); + + ret = i2cr_transfer(i2cr->client, I2CR_ADDRESS_CFAM(addr), &data); + if (ret) + goto unlock; + + ret = i2cr_check_status(i2cr->client); + if (ret) + goto unlock; + + trace_i2cr_read(addr, size, (__force uint32_t)data); + memcpy(val, &data, size); + +unlock: + mutex_unlock(&i2cr->lock); + return ret; +} + +static int i2cr_write(struct fsi_master *master, int link, uint8_t id, uint32_t addr, + const void *val, size_t size) +{ + struct fsi_master_i2cr *i2cr = container_of(master, struct fsi_master_i2cr, master); + struct { + __be32 command; + u32 val; + u32 rsvd; + } __packed data = { 0, 0, 0 }; + int ret; + + if (link || id || (addr & 0xffff0000) || !(size == 1 || size == 2 || size == 4)) + return -EINVAL; + + memcpy(&data.val, val, size); + data.command = i2cr_get_command(I2CR_ADDRESS_CFAM(addr), + i2cr_check_parity(data.val, true)); + + mutex_lock(&i2cr->lock); + + ret = i2c_master_send(i2cr->client, (const char *)&data, sizeof(data)); + if (ret == sizeof(data)) { + ret = i2cr_check_status(i2cr->client); + if (!ret) + trace_i2cr_write(addr, size, data.val); + } else { + trace_i2cr_i2c_error(ret); + + if (ret >= 0) + ret = -EIO; + } + + mutex_unlock(&i2cr->lock); + return ret; +} + +static int i2cr_probe(struct i2c_client *client) +{ + struct fsi_master_i2cr *i2cr; + int ret; + + i2cr = devm_kzalloc(&client->dev, sizeof(*i2cr), GFP_KERNEL); + if (!i2cr) + return -ENOMEM; + + i2cr->master.dev.parent = &client->dev; + i2cr->master.dev.of_node = of_node_get(dev_of_node(&client->dev)); + + i2cr->master.n_links = 1; + i2cr->master.read = i2cr_read; + i2cr->master.write = i2cr_write; + + mutex_init(&i2cr->lock); + i2cr->client = client; + + ret = fsi_master_register(&i2cr->master); + if (ret) + return ret; + + i2c_set_clientdata(client, i2cr); + return 0; +} + +static void i2cr_remove(struct i2c_client *client) +{ + struct fsi_master_i2cr *i2cr = i2c_get_clientdata(client); + + fsi_master_unregister(&i2cr->master); +} + +static const struct of_device_id i2cr_i2c_ids[] = { + { .compatible = "ibm,i2cr-fsi-master", }, + { } +}; +MODULE_DEVICE_TABLE(of, i2cr_i2c_ids); + +static struct i2c_driver i2cr_driver = { + .probe_new = i2cr_probe, + .remove = i2cr_remove, + .driver = { + .name = "fsi-master-i2cr", + .of_match_table = i2cr_i2c_ids, + }, +}; + +module_i2c_driver(i2cr_driver) + +MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>"); +MODULE_DESCRIPTION("IBM I2C Responder virtual FSI master driver"); +MODULE_LICENSE("GPL"); diff --git a/include/trace/events/fsi_master_i2cr.h b/include/trace/events/fsi_master_i2cr.h new file mode 100644 index 000000000000..7b53c6a35bc7 --- /dev/null +++ b/include/trace/events/fsi_master_i2cr.h @@ -0,0 +1,96 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM fsi_master_i2cr + +#if !defined(_TRACE_FSI_MASTER_I2CR_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_FSI_MASTER_I2CR_H + +#include <linux/tracepoint.h> + +TRACE_EVENT(i2cr_command, + TP_PROTO(uint32_t command), + TP_ARGS(command), + TP_STRUCT__entry( + __field(uint32_t, command) + ), + TP_fast_assign( + __entry->command = command; + ), + TP_printk("command:%08x", __entry->command) +); + +TRACE_EVENT(i2cr_i2c_error, + TP_PROTO(int rc), + TP_ARGS(rc), + TP_STRUCT__entry( + __field(int, rc) + ), + TP_fast_assign( + __entry->rc = rc; + ), + TP_printk("rc:%d", __entry->rc) +); + +TRACE_EVENT(i2cr_read, + TP_PROTO(uint32_t addr, size_t size, uint64_t result), + TP_ARGS(addr, size, result), + TP_STRUCT__entry( + __field(uint32_t, addr) + __field(size_t, size) + __field(uint64_t, result) + ), + TP_fast_assign( + __entry->addr = addr; + __entry->size = size; + __entry->result = result; + ), + TP_printk("addr:%08x size:%zu result:%016llx", __entry->addr, __entry->size, + __entry->result) +); + +TRACE_EVENT(i2cr_status, + TP_PROTO(uint64_t status), + TP_ARGS(status), + TP_STRUCT__entry( + __field(uint32_t, status) + ), + TP_fast_assign( + __entry->status = status >> 32; + ), + TP_printk("status:%08x", __entry->status) +); + +TRACE_EVENT(i2cr_status_error, + TP_PROTO(uint64_t status, uint64_t error), + TP_ARGS(status, error), + TP_STRUCT__entry( + __field(uint64_t, error) + __field(uint32_t, status) + ), + TP_fast_assign( + __entry->error = error; + __entry->status = status >> 32; + ), + TP_printk("status:%08x error:%016llx", __entry->status, __entry->error) +); + +TRACE_EVENT(i2cr_write, + TP_PROTO(uint32_t addr, uint32_t val, size_t size), + TP_ARGS(addr, val, size), + TP_STRUCT__entry( + __field(uint32_t, addr) + __field(uint32_t, val) + __field(size_t, size) + ), + TP_fast_assign( + __entry->addr = addr; + __entry->val = val; + __entry->size = size; + ), + TP_printk("addr:%08x val:%08x size:%zu", __entry->addr, __entry->val, __entry->size) +); + +#endif + +#include <trace/define_trace.h>
The I2C Responder (I2CR) is an I2C device that translates I2C commands to CFAM or SCOM operations, effectively implementing an FSI master and bus. Signed-off-by: Eddie James <eajames@linux.ibm.com> --- drivers/fsi/Kconfig | 9 + drivers/fsi/Makefile | 1 + drivers/fsi/fsi-master-i2cr.c | 225 +++++++++++++++++++++++++ include/trace/events/fsi_master_i2cr.h | 96 +++++++++++ 4 files changed, 331 insertions(+) create mode 100644 drivers/fsi/fsi-master-i2cr.c create mode 100644 include/trace/events/fsi_master_i2cr.h