| Message ID | 20240117144704.602-9-graf@amazon.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | kexec: Allow preservation of ftrace buffers | expand |
On Wed, Jan 17, 2024 at 02:46:55PM +0000, Alexander Graf wrote: > We now have all bits in place to support KHO kexecs. This patch adds > awareness of KHO in the kexec file as well as boot path for arm64 and > adds the respective kconfig option to the architecture so that it can > use KHO successfully. > > Signed-off-by: Alexander Graf <graf@amazon.com> > > --- > > v1 -> v2: > > - test bot warning fix > - Change kconfig option to ARCH_SUPPORTS_KEXEC_KHO > - s/kho_reserve_mem/kho_reserve_previous_mem/g > - s/kho_reserve/kho_reserve_scratch/g > - Remove / reduce ifdefs for kho fdt code > --- > arch/arm64/Kconfig | 3 +++ > arch/arm64/kernel/setup.c | 2 ++ > arch/arm64/mm/init.c | 8 ++++++ > drivers/of/fdt.c | 39 ++++++++++++++++++++++++++++ > drivers/of/kexec.c | 54 +++++++++++++++++++++++++++++++++++++++ > 5 files changed, 106 insertions(+) > > diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig > index 8f6cf1221b6a..44d8923d9db4 100644 > --- a/arch/arm64/Kconfig > +++ b/arch/arm64/Kconfig > @@ -1496,6 +1496,9 @@ config ARCH_SUPPORTS_KEXEC_IMAGE_VERIFY_SIG > config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG > def_bool y > > +config ARCH_SUPPORTS_KEXEC_KHO > + def_bool y > + > config ARCH_SUPPORTS_CRASH_DUMP > def_bool y > > diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c > index 417a8a86b2db..9aa05b84d202 100644 > --- a/arch/arm64/kernel/setup.c > +++ b/arch/arm64/kernel/setup.c > @@ -346,6 +346,8 @@ void __init __no_sanitize_address setup_arch(char **cmdline_p) > > paging_init(); > > + kho_reserve_previous_mem(); > + > acpi_table_upgrade(); > > /* Parse the ACPI tables for possible boot-time configuration */ > diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c > index 74c1db8ce271..1a8fc91509af 100644 > --- a/arch/arm64/mm/init.c > +++ b/arch/arm64/mm/init.c > @@ -358,6 +358,8 @@ void __init bootmem_init(void) > */ > arch_reserve_crashkernel(); > > + kho_reserve_scratch(); > + > memblock_dump_all(); > } > > @@ -386,6 +388,12 @@ void __init mem_init(void) > /* this will put all unused low memory onto the freelists */ > memblock_free_all(); > > + /* > + * Now that all KHO pages are marked as reserved, let's flip them back > + * to normal pages with accurate refcount. > + */ > + kho_populate_refcount(); > + > /* > * Check boundaries twice: Some fundamental inconsistencies can be > * detected at build time already. > diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c > index bf502ba8da95..f9b9a36fb722 100644 > --- a/drivers/of/fdt.c > +++ b/drivers/of/fdt.c > @@ -1006,6 +1006,42 @@ void __init early_init_dt_check_for_usable_mem_range(void) > memblock_add(rgn[i].base, rgn[i].size); > } > > +/** > + * early_init_dt_check_kho - Decode info required for kexec handover from DT > + */ > +static void __init early_init_dt_check_kho(void) > +{ > + unsigned long node = chosen_node_offset; > + u64 kho_start, scratch_start, scratch_size, mem_start, mem_size; > + const __be32 *p; > + int l; > + > + if (!IS_ENABLED(CONFIG_KEXEC_KHO) || (long)node < 0) > + return; > + > + p = of_get_flat_dt_prop(node, "linux,kho-dt", &l); These need to be documented. chosen node schema lives in dtschema. > + if (l != (dt_root_addr_cells + dt_root_size_cells) * sizeof(__be32)) > + return; I would just make all these fixed 64-bit values rather than based on address and size cells. That's what we've done on more recent chosen properties describing regions. Rob
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 8f6cf1221b6a..44d8923d9db4 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1496,6 +1496,9 @@ config ARCH_SUPPORTS_KEXEC_IMAGE_VERIFY_SIG config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG def_bool y +config ARCH_SUPPORTS_KEXEC_KHO + def_bool y + config ARCH_SUPPORTS_CRASH_DUMP def_bool y diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 417a8a86b2db..9aa05b84d202 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -346,6 +346,8 @@ void __init __no_sanitize_address setup_arch(char **cmdline_p) paging_init(); + kho_reserve_previous_mem(); + acpi_table_upgrade(); /* Parse the ACPI tables for possible boot-time configuration */ diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 74c1db8ce271..1a8fc91509af 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -358,6 +358,8 @@ void __init bootmem_init(void) */ arch_reserve_crashkernel(); + kho_reserve_scratch(); + memblock_dump_all(); } @@ -386,6 +388,12 @@ void __init mem_init(void) /* this will put all unused low memory onto the freelists */ memblock_free_all(); + /* + * Now that all KHO pages are marked as reserved, let's flip them back + * to normal pages with accurate refcount. + */ + kho_populate_refcount(); + /* * Check boundaries twice: Some fundamental inconsistencies can be * detected at build time already. diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index bf502ba8da95..f9b9a36fb722 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -1006,6 +1006,42 @@ void __init early_init_dt_check_for_usable_mem_range(void) memblock_add(rgn[i].base, rgn[i].size); } +/** + * early_init_dt_check_kho - Decode info required for kexec handover from DT + */ +static void __init early_init_dt_check_kho(void) +{ + unsigned long node = chosen_node_offset; + u64 kho_start, scratch_start, scratch_size, mem_start, mem_size; + const __be32 *p; + int l; + + if (!IS_ENABLED(CONFIG_KEXEC_KHO) || (long)node < 0) + return; + + p = of_get_flat_dt_prop(node, "linux,kho-dt", &l); + if (l != (dt_root_addr_cells + dt_root_size_cells) * sizeof(__be32)) + return; + + kho_start = dt_mem_next_cell(dt_root_addr_cells, &p); + + p = of_get_flat_dt_prop(node, "linux,kho-scratch", &l); + if (l != (dt_root_addr_cells + dt_root_size_cells) * sizeof(__be32)) + return; + + scratch_start = dt_mem_next_cell(dt_root_addr_cells, &p); + scratch_size = dt_mem_next_cell(dt_root_addr_cells, &p); + + p = of_get_flat_dt_prop(node, "linux,kho-mem", &l); + if (l != (dt_root_addr_cells + dt_root_size_cells) * sizeof(__be32)) + return; + + mem_start = dt_mem_next_cell(dt_root_addr_cells, &p); + mem_size = dt_mem_next_cell(dt_root_addr_cells, &p); + + kho_populate(kho_start, scratch_start, scratch_size, mem_start, mem_size); +} + #ifdef CONFIG_SERIAL_EARLYCON int __init early_init_dt_scan_chosen_stdout(void) @@ -1304,6 +1340,9 @@ void __init early_init_dt_scan_nodes(void) /* Handle linux,usable-memory-range property */ early_init_dt_check_for_usable_mem_range(); + + /* Handle kexec handover */ + early_init_dt_check_kho(); } bool __init early_init_dt_scan(void *params) diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c index 68278340cecf..59070b09ad45 100644 --- a/drivers/of/kexec.c +++ b/drivers/of/kexec.c @@ -264,6 +264,55 @@ static inline int setup_ima_buffer(const struct kimage *image, void *fdt, } #endif /* CONFIG_IMA_KEXEC */ +static int kho_add_chosen(const struct kimage *image, void *fdt, int chosen_node) +{ + void *dt = NULL; + phys_addr_t dt_mem = 0; + phys_addr_t dt_len = 0; + phys_addr_t scratch_mem = 0; + phys_addr_t scratch_len = 0; + void *mem_cache = NULL; + phys_addr_t mem_cache_mem = 0; + phys_addr_t mem_cache_len = 0; + int ret = 0; + +#ifdef CONFIG_KEXEC_KHO + dt = image->kho.dt.buffer; + dt_mem = image->kho.dt.mem; + dt_len = image->kho.dt.bufsz; + + scratch_mem = kho_scratch_phys; + scratch_len = kho_scratch_len; + + mem_cache = image->kho.mem_cache.buffer; + mem_cache_mem = image->kho.mem_cache.mem; + mem_cache_len = image->kho.mem_cache.bufsz; +#endif + + if (!dt || !mem_cache) + goto out; + + pr_debug("Adding kho metadata to DT"); + + ret = fdt_appendprop_addrrange(fdt, 0, chosen_node, "linux,kho-dt", + dt_mem, dt_len); + if (ret) + goto out; + + ret = fdt_appendprop_addrrange(fdt, 0, chosen_node, "linux,kho-scratch", + scratch_mem, scratch_len); + if (ret) + goto out; + + ret = fdt_appendprop_addrrange(fdt, 0, chosen_node, "linux,kho-mem", + mem_cache_mem, mem_cache_len); + if (ret) + goto out; + +out: + return ret; +} + /* * of_kexec_alloc_and_setup_fdt - Alloc and setup a new Flattened Device Tree * @@ -412,6 +461,11 @@ void *of_kexec_alloc_and_setup_fdt(const struct kimage *image, } } + /* Add kho metadata if this is a KHO image */ + ret = kho_add_chosen(image, fdt, chosen_node); + if (ret) + goto out; + /* add bootargs */ if (cmdline) { ret = fdt_setprop_string(fdt, chosen_node, "bootargs", cmdline);
We now have all bits in place to support KHO kexecs. This patch adds awareness of KHO in the kexec file as well as boot path for arm64 and adds the respective kconfig option to the architecture so that it can use KHO successfully. Signed-off-by: Alexander Graf <graf@amazon.com> --- v1 -> v2: - test bot warning fix - Change kconfig option to ARCH_SUPPORTS_KEXEC_KHO - s/kho_reserve_mem/kho_reserve_previous_mem/g - s/kho_reserve/kho_reserve_scratch/g - Remove / reduce ifdefs for kho fdt code --- arch/arm64/Kconfig | 3 +++ arch/arm64/kernel/setup.c | 2 ++ arch/arm64/mm/init.c | 8 ++++++ drivers/of/fdt.c | 39 ++++++++++++++++++++++++++++ drivers/of/kexec.c | 54 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 106 insertions(+)