@@ -766,8 +766,8 @@ int osnoise_hist_main(int argc, char *argv[])
struct osnoise_params *params;
struct osnoise_tool *record = NULL;
struct osnoise_tool *tool = NULL;
+ enum result return_value = ERROR;
struct trace_instance *trace;
- int return_value = 1;
int retval;
params = osnoise_hist_parse_args(argc, argv);
@@ -889,12 +889,13 @@ int osnoise_hist_main(int argc, char *argv[])
osnoise_print_stats(params, tool);
- return_value = 0;
+ return_value = PASSED;
if (osnoise_trace_is_off(tool, record)) {
printf("rtla osnoise hit stop tracing\n");
save_trace_to_file(record ? record->trace.inst : NULL,
params->trace_output);
+ return_value = FAILED;
}
out_hist:
@@ -594,8 +594,8 @@ int osnoise_top_main(int argc, char **argv)
struct osnoise_params *params;
struct osnoise_tool *record = NULL;
struct osnoise_tool *tool = NULL;
+ enum result return_value = ERROR;
struct trace_instance *trace;
- int return_value = 1;
int retval;
params = osnoise_top_parse_args(argc, argv);
@@ -715,12 +715,13 @@ int osnoise_top_main(int argc, char **argv)
osnoise_print_stats(params, tool);
- return_value = 0;
+ return_value = PASSED;
if (osnoise_trace_is_off(tool, record)) {
printf("osnoise hit stop tracing\n");
save_trace_to_file(record ? record->trace.inst : NULL,
params->trace_output);
+ return_value = FAILED;
}
out_top:
@@ -1141,11 +1141,11 @@ int timerlat_hist_main(int argc, char *argv[])
struct timerlat_params *params;
struct osnoise_tool *record = NULL;
struct timerlat_u_params params_u;
+ enum result return_value = ERROR;
struct osnoise_tool *tool = NULL;
struct osnoise_tool *aa = NULL;
struct trace_instance *trace;
int dma_latency_fd = -1;
- int return_value = 1;
pthread_t timerlat_u;
int retval;
int nr_cpus, i;
@@ -1378,7 +1378,7 @@ int timerlat_hist_main(int argc, char *argv[])
timerlat_print_stats(params, tool);
- return_value = 0;
+ return_value = PASSED;
if (osnoise_trace_is_off(tool, record) && !stop_tracing) {
printf("rtla timerlat hit stop tracing\n");
@@ -1388,6 +1388,7 @@ int timerlat_hist_main(int argc, char *argv[])
save_trace_to_file(record ? record->trace.inst : NULL,
params->trace_output);
+ return_value = FAILED;
}
out_hist:
@@ -985,12 +985,12 @@ int timerlat_top_main(int argc, char *argv[])
struct timerlat_params *params;
struct osnoise_tool *record = NULL;
struct timerlat_u_params params_u;
+ enum result return_value = ERROR;
struct osnoise_tool *top = NULL;
struct osnoise_tool *aa = NULL;
struct trace_instance *trace;
int dma_latency_fd = -1;
pthread_t timerlat_u;
- int return_value = 1;
char *max_lat;
int retval;
int nr_cpus, i;
@@ -1197,7 +1197,7 @@ int timerlat_top_main(int argc, char *argv[])
timerlat_print_stats(params, top);
- return_value = 0;
+ return_value = PASSED;
if (osnoise_trace_is_off(top, record) && !stop_tracing) {
printf("rtla timerlat hit stop tracing\n");
@@ -1207,6 +1207,7 @@ int timerlat_top_main(int argc, char *argv[])
save_trace_to_file(record ? record->trace.inst : NULL,
params->trace_output);
+ return_value = FAILED;
} else if (params->aa_only) {
/*
* If the trace did not stop with --aa-only, at least print the
@@ -83,3 +83,9 @@ int auto_house_keeping(cpu_set_t *monitored_cpus);
#define ns_to_usf(x) (((double)x/1000))
#define ns_to_per(total, part) ((part * 100) / (double)total)
+
+enum result {
+ PASSED = 0, /* same as EXIT_SUCCESS */
+ ERROR = 1, /* same as EXIT_FAILURE, an error in arguments */
+ FAILED = 2, /* test hit the stop tracing condition */
+};
@@ -39,6 +39,7 @@ reset_osnoise() {
}
check() {
+ expected_exitcode=${3:-0}
# Simple check: run rtla with given arguments and test exit code.
# If TEST_COUNT is set, run the test. Otherwise, just count.
ctr=$(($ctr + 1))
@@ -49,7 +50,7 @@ check() {
# Run rtla; in case of failure, include its output as comment
# in the test results.
result=$(stdbuf -oL $TIMEOUT "$RTLA" $2 2>&1); exitcode=$?
- if [ $exitcode -eq 0 ]
+ if [ $exitcode -eq $expected_exitcode ]
then
echo "ok $ctr - $1"
else
@@ -68,12 +69,14 @@ check_with_osnoise_options() {
# Save original arguments
arg1=$1
arg2=$2
+ arg3=$3
# Apply osnoise options (if not dry run)
if [ -n "$TEST_COUNT" ]
then
[ "$NO_RESET_OSNOISE" == 1 ] || reset_osnoise
shift
+ shift
while shift
do
[ "$1" == "" ] && continue
@@ -84,7 +87,7 @@ check_with_osnoise_options() {
done
fi
- NO_RESET_OSNOISE=1 check "$arg1" "$arg2"
+ NO_RESET_OSNOISE=1 check "$arg1" "$arg2" "$arg3"
}
set_timeout() {
@@ -10,11 +10,11 @@ check "verify help page" \
check "detect noise higher than one microsecond" \
"hwnoise -c 0 -T 1 -d 5s -q"
check "set the automatic trace mode" \
- "hwnoise -a 5 -d 30s"
+ "hwnoise -a 5 -d 30s" 2
check "set scheduling param to the osnoise tracer threads" \
"hwnoise -P F:1 -c 0 -r 900000 -d 1M -q"
check "stop the trace if a single sample is higher than 1 us" \
- "hwnoise -s 1 -T 1 -t -d 30s"
+ "hwnoise -s 1 -T 1 -t -d 30s" 2
check "enable a trace event trigger" \
"hwnoise -t -e osnoise:irq_noise trigger=\"hist:key=desc,duration:sort=desc,duration:vals=hitcount\" -d 1m"
@@ -10,9 +10,9 @@ check "verify help page" \
check "verify the --priority/-P param" \
"osnoise top -P F:1 -c 0 -r 900000 -d 1M -q"
check "verify the --stop/-s param" \
- "osnoise top -s 30 -T 1 -t"
+ "osnoise top -s 30 -T 1 -t" 2
check "verify the --trace param" \
- "osnoise hist -s 30 -T 1 -t"
+ "osnoise hist -s 30 -T 1 -t" 2
check "verify the --entries/-E param" \
"osnoise hist -P F:1 -c 0 -r 900000 -d 1M -b 10 -E 25"
@@ -20,6 +20,6 @@ check "verify the --entries/-E param" \
# and stopping on threshold.
# If default period is not set, this will time out.
check_with_osnoise_options "apply default period" \
- "osnoise hist -s 1" period_us=600000000
+ "osnoise hist -s 1" 2 period_us=600000000
test_end
@@ -21,21 +21,21 @@ export RTLA_NO_BPF=$option
check "verify help page" \
"timerlat --help"
check "verify -s/--stack" \
- "timerlat top -s 3 -T 10 -t"
+ "timerlat top -s 3 -T 10 -t" 2
check "verify -P/--priority" \
"timerlat top -P F:1 -c 0 -d 1M -q"
check "test in nanoseconds" \
- "timerlat top -i 2 -c 0 -n -d 30s"
+ "timerlat top -i 2 -c 0 -n -d 30s" 2
check "set the automatic trace mode" \
- "timerlat top -a 5 --dump-tasks"
+ "timerlat top -a 5 --dump-tasks" 2
check "print the auto-analysis if hits the stop tracing condition" \
- "timerlat top --aa-only 5"
+ "timerlat top --aa-only 5" 2
check "disable auto-analysis" \
- "timerlat top -s 3 -T 10 -t --no-aa"
+ "timerlat top -s 3 -T 10 -t --no-aa" 2
check "verify -c/--cpus" \
"timerlat hist -c 0 -d 30s"
check "hist test in nanoseconds" \
- "timerlat hist -i 2 -c 0 -n -d 30s"
+ "timerlat hist -i 2 -c 0 -n -d 30s" 2
done
test_end
Failed tests return the same exit value as passed tests, requiring test frameworks to validate results by parsing output. Set a unique exit value for failed tests to allow integration with testing frameworks without parsing output. Add enum type for return value. Update `make check`. Signed-off-by: Costa Shulyupin <costa.shul@redhat.com> --- tools/tracing/rtla/src/osnoise_hist.c | 5 +++-- tools/tracing/rtla/src/osnoise_top.c | 5 +++-- tools/tracing/rtla/src/timerlat_hist.c | 5 +++-- tools/tracing/rtla/src/timerlat_top.c | 5 +++-- tools/tracing/rtla/src/utils.h | 6 ++++++ tools/tracing/rtla/tests/engine.sh | 7 +++++-- tools/tracing/rtla/tests/hwnoise.t | 4 ++-- tools/tracing/rtla/tests/osnoise.t | 6 +++--- tools/tracing/rtla/tests/timerlat.t | 12 ++++++------ 9 files changed, 34 insertions(+), 21 deletions(-)