[V2,0/3] ADD interconnect support for USB

Message

Chandana Kishori Chiluveru Sept. 16, 2019, 11:40 a.m. UTC

This path series aims to add interconnect support in
dwc3-qcom driver on SDM845 SoCs.

Changes since V1:
  > Comments by Georgi Djakov on "[PATCH 2/3]" addressed
  > [PATCH 1/3] and [PATCH 3/3] remains unchanged

Chandana Kishori Chiluveru (3):
  dt-bindings: Introduce interconnect bindings for usb
  usb: dwc3: qcom: Add interconnect support in dwc3 driver
  arm64: dts: sdm845: Add interconnect properties for USB

 .../devicetree/bindings/usb/qcom,dwc3.txt          |  13 ++
 arch/arm64/boot/dts/qcom/sdm845.dtsi               |  12 ++
 drivers/usb/dwc3/dwc3-qcom.c                       | 145 ++++++++++++++++++++-
 3 files changed, 168 insertions(+), 2 deletions(-)

Comments

Manu Gautam Sept. 17, 2019, 3:54 a.m. UTC | #1

On 9/16/2019 5:10 PM, Chandana Kishori Chiluveru wrote:
> This path series aims to add interconnect support in
> dwc3-qcom driver on SDM845 SoCs.

As Matthias commented on other patch, can you update the
subject to mention that series is for dwc3-qcom only? And update
same dt-bindings patch commit subject as well

>
> Changes since V1:
>   > Comments by Georgi Djakov on "[PATCH 2/3]" addressed
>   > [PATCH 1/3] and [PATCH 3/3] remains unchanged
>
> Chandana Kishori Chiluveru (3):
>   dt-bindings: Introduce interconnect bindings for usb
>   usb: dwc3: qcom: Add interconnect support in dwc3 driver
>   arm64: dts: sdm845: Add interconnect properties for USB
>
>  .../devicetree/bindings/usb/qcom,dwc3.txt          |  13 ++
>  arch/arm64/boot/dts/qcom/sdm845.dtsi               |  12 ++
>  drivers/usb/dwc3/dwc3-qcom.c                       | 145 ++++++++++++++++++++-
>  3 files changed, 168 insertions(+), 2 deletions(-)
>