mbox series

[v4,0/3] Add QCOM SNPS PHY overriding params support

Message ID 1652282793-5580-1-git-send-email-quic_kriskura@quicinc.com (mailing list archive)
Headers show
Series Add QCOM SNPS PHY overriding params support | expand

Message

Krishna Kurapati May 11, 2022, 3:26 p.m. UTC 
Added support for overriding tuning parameters in QCOM SNPS PHY
from device tree.

changes in v4:
Fixed nitpicks in code.
Initial compliance test results showed overshoot in the middle of eye
diagram. The current dt values were put in place to correct it and fix
overshoot issue.

changes in v3:
Added support for phy tuning parameters to be represented in bps and
corresponding register values to be written are obtained by traversing
through data map declared in the driver.

changes in v2:
Reading the individual fields in each overriding register from
device tree.

Krishna Kurapati (2):
  phy: qcom-snps: Add support for overriding phy tuning parameters
  arm64: dts: qcom: sc7280: Update SNPS Phy params for SC7280 IDP device

Sandeep Maheswaram (1):
  dt-bindings: phy: qcom,usb-snps-femto-v2: Add phy override params
    bindings

 .../bindings/phy/qcom,usb-snps-femto-v2.yaml       |  87 +++++++
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi           |   6 +
 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c      | 267 ++++++++++++++++++++-
 3 files changed, 358 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski May 11, 2022, 6:16 p.m. UTC | #1 
On 11/05/2022 17:26, Krishna Kurapati wrote:
> Added support for overriding tuning parameters in QCOM SNPS PHY
> from device tree.

Please use proper PATCH title. The easiest is to use git format-patch to
create proper patches.

Best regards,
Krzysztof