mbox series

[0/5] Remodel HD3SS3220 device nodes

Message ID 20200804174828.8339-1-biju.das.jz@bp.renesas.com (mailing list archive)
Headers show
Series Remodel HD3SS3220 device nodes | expand

Message

Biju Das Aug. 4, 2020, 5:48 p.m. UTC
Some platforms have only super speed data bus connected to HD3SS3220 device
and high speed data bus directly connected to the SoC. In such platforms
modelling connector as a child of this device is making it non complaint
with usb connector bindings. By modelling connector node as standalone
device node along with HD3SS3220 device and the SoC data bus will make it
complaint with usb connector bindings.

It is based on the below discussion threads

1) https://patchwork.kernel.org/patch/11669423/
2) https://patchwork.kernel.org/patch/11129567/


Biju Das (4):
  dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus
  usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode
  arm64: dts: renesas: cat874: Move connector node out of hd3ss3220
    device
  arm64: dts: renesas: beacon-renesom-baseboard: Move connector node out
    of hd3ss3220 device

Lad Prabhakar (1):
  dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema

 .../bindings/usb/renesas,usb3-peri.yaml       | 36 +++++++--
 .../devicetree/bindings/usb/ti,hd3ss3220.txt  | 38 ---------
 .../devicetree/bindings/usb/ti,hd3ss3220.yaml | 81 +++++++++++++++++++
 .../dts/renesas/beacon-renesom-baseboard.dtsi | 67 +++++++++++----
 .../boot/dts/renesas/r8a774c0-cat874.dts      | 67 +++++++++++----
 drivers/usb/typec/hd3ss3220.c                 | 18 ++++-
 6 files changed, 225 insertions(+), 82 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
 create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml