mbox series

[V2,0/4] Enable IPQ5018 USB2 support

Message ID 20230830111722.19380-1-quic_nsekar@quicinc.com (mailing list archive)
Headers show
Series Enable IPQ5018 USB2 support | expand

Message

Nitheesh Sekar Aug. 30, 2023, 11:17 a.m. UTC 
This patch series adds the relevant phy and controller
DT configurations for enabling USB2 host mode support
on IPQ5018.

Tested with a USB Mass storage device.

[V2]:
	Incorporated review comments regarding splitting the
	series as per subsytem, device tree naming conventions
	and ordereing of the nodes.

Nitheesh Sekar (4):
  dt-bindings: phy: qcom,m31: Add IPQ5018 compatible
  phy: qcom-m31: Add compatible, phy init sequence for IPQ5018
  arm64: dts: qcom: ipq5018: Add USB related nodes
  arm64: dts: qcom: ipq5018: Enable USB

 .../bindings/phy/qcom,ipq5332-usb-hsphy.yaml  |  4 +-
 .../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 12 ++++
 arch/arm64/boot/dts/qcom/ipq5018.dtsi         | 54 +++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-m31.c           | 60 +++++++++++++++++++
 4 files changed, 129 insertions(+), 1 deletion(-)