mbox series

[0/5] Add support for Battery Status & Battery Caps AMS in TCPM

Message ID 20250312-batt_ops-v1-0-88e0bb3129fd@google.com (mailing list archive)
Headers show
Series Add support for Battery Status & Battery Caps AMS in TCPM | expand

Message

Amit Sunil Dhamne via B4 Relay March 12, 2025, 11:42 p.m. UTC
Support for Battery Status & Battery Caps messages in response to
Get_Battery_Status & Get_Battery_Cap request is required by USB PD devices
powered by battery, as per "USB PD R3.1 V1.8 Spec", "6.13 Message
Applicability" section. This patchset adds support for these AMSes
to achieve greater compliance with the spec.

Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
---
Amit Sunil Dhamne (5):
      dt-bindings: connector: add fixed-batteries property
      power: supply: core: add function to get supplies from fwnode
      usb: typec: tcpm: Add support for Battery Status response message
      power: supply: core: add vendor and product id properties
      usb: typec: tcpm: Add support for Battery Cap response message

 Documentation/ABI/testing/sysfs-class-power        |  20 ++
 .../bindings/connector/usb-connector.yaml          |   8 +
 .../devicetree/bindings/usb/maxim,max33359.yaml    |   1 +
 Documentation/power/power_supply_class.rst         |  11 ++
 drivers/power/supply/power_supply_core.c           |  60 ++++++
 drivers/power/supply/power_supply_sysfs.c          |   2 +
 drivers/usb/typec/tcpm/tcpm.c                      | 217 ++++++++++++++++++++-
 include/linux/power_supply.h                       |   7 +
 include/linux/usb/pd.h                             |  65 ++++++
 9 files changed, 388 insertions(+), 3 deletions(-)
---
base-commit: 80e54e84911a923c40d7bee33a34c1b4be148d7a
change-id: 20250311-batt_ops-be1bd71ca254

Best regards,

Comments

Krzysztof Kozlowski March 13, 2025, 8:50 a.m. UTC | #1
On Wed, Mar 12, 2025 at 04:42:00PM -0700, Amit Sunil Dhamne wrote:
> Support for Battery Status & Battery Caps messages in response to
> Get_Battery_Status & Get_Battery_Cap request is required by USB PD devices
> powered by battery, as per "USB PD R3.1 V1.8 Spec", "6.13 Message
> Applicability" section. This patchset adds support for these AMSes
> to achieve greater compliance with the spec.

Which board uses it? I would be happy to see that connection between
batteries and USB connector on the schematics of some real device. How
does it look like?

Best regards,
Krzysztof