Show patches with: State = Action Required       |   10064 patches
« 1 2 3 4 … 100 101 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v1] usb: storage: add a macro for the upper limit of max LUN [v1] usb: storage: add a macro for the upper limit of max LUN - - - --- 2024-10-30 Dingyan Li New
[v2] usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier [v2] usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier - - - --- 2024-10-30 Rex Nie New
usb: musb: sunxi: Fix accessing an released usb phy usb: musb: sunxi: Fix accessing an released usb phy - - - --- 2024-10-29 Zijun Hu New
[v5,2/2] USB: xhci: add support for PWRON active high USB: xhci: add support for PWRON polarity invert (TI TUSB73x0) - - - --- 2024-10-29 Francesco Dolcini New
[v5,1/2] dt-bindings: usb: add TUSB73x0 PCIe USB: xhci: add support for PWRON polarity invert (TI TUSB73x0) - 1 - --- 2024-10-29 Francesco Dolcini New
arm64: dts: mediatek: mt6358: fix dtbs_check error arm64: dts: mediatek: mt6358: fix dtbs_check error - - - --- 2024-10-29 Macpaul Lin New
usb: typec: qcom-pmic: fix uninitialized value hdr_len and txbuf_len usb: typec: qcom-pmic: fix uninitialized value hdr_len and txbuf_len - - - --- 2024-10-29 Rex Nie New
thunderbolt: Add only on-board retimers when !CONFIG_USB4_DEBUGFS_MARGINING thunderbolt: Add only on-board retimers when !CONFIG_USB4_DEBUGFS_MARGINING - - 1 --- 2024-10-28 Mika Westerberg New
USB: serial: qcserial: add support for Sierra Wireless EM86xx USB: serial: qcserial: add support for Sierra Wireless EM86xx - - - --- 2024-10-28 吳逼逼 New
USB: serial: option: add MediaTek T7XX compositions USB: serial: option: add MediaTek T7XX compositions - - - --- 2024-10-28 吳逼逼 New
usb: cdns2: fix possible null-ptr-deref in cdns2_gadget_ep_queue() usb: cdns2: fix possible null-ptr-deref in cdns2_gadget_ep_queue() - - - --- 2024-10-28 yiyang (D) New
[v2,5/5] xhci: Correct handling of one-TRB isoc TD on Etron xHCI host xhci: Some improvement for Etron xHCI host - - - --- 2024-10-28 Kuangyi Chiang New
[v2,4/5] xhci: Don't perform Soft Retry for Etron xHCI host xhci: Some improvement for Etron xHCI host - - - --- 2024-10-28 Kuangyi Chiang New
[v2,3/5] xhci: Fix control transfer error on Etron xHCI host xhci: Some improvement for Etron xHCI host - - - --- 2024-10-28 Kuangyi Chiang New
[v2,2/5] xhci: Don't issue Reset Device command to Etron xHCI host xhci: Some improvement for Etron xHCI host - - - --- 2024-10-28 Kuangyi Chiang New
[v2,1/5] xhci: Combine two if statements for Etron xHCI host xhci: Some improvement for Etron xHCI host - - - --- 2024-10-28 Kuangyi Chiang New
usb:core: Remove unused parameter struct usb_hcd *hcd in usb_hcd_unlink_urb_from_ep usb:core: Remove unused parameter struct usb_hcd *hcd in usb_hcd_unlink_urb_from_ep - - - --- 2024-10-27 李哲 New
usb: gadget: udc: fix possible null-ptr-deref in mv_u3d_req_to_trb() usb: gadget: udc: fix possible null-ptr-deref in mv_u3d_req_to_trb() - - - --- 2024-10-26 yiyang (D) New
Add LAN78XX OTP_ACCESS flag support Add LAN78XX OTP_ACCESS flag support - - - --- 2024-10-25 Fabian Benschuh New
[2/2] usb: xhci: improve xhci_set_interrupter_moderation() usb: xhci: improve HCD page size & IMODI - - - --- 2024-10-25 Niklas Neronin New
[1/2] usb: xhci: improve HCD page size validation and setting usb: xhci: improve HCD page size & IMODI - - - --- 2024-10-25 Niklas Neronin New
[V5,9/9] ARM: bcm2835_defconfig: Enable SUSPEND ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - 1 - --- 2024-10-25 Stefan Wahren New
[V5,8/9] usb: dwc2: Implement recovery after PM domain off ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - 1 - --- 2024-10-25 Stefan Wahren New
[V5,7/9] usb: dwc2: Refactor backup/restore of registers ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - - - --- 2024-10-25 Stefan Wahren New
[V5,6/9] usb: dwc2: gadget: Introduce register restore flags ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - - - --- 2024-10-25 Stefan Wahren New
[V5,5/9] mmc: bcm2835: add suspend/resume pm support ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - - - --- 2024-10-25 Stefan Wahren New
[V5,4/9] mmc: bcm2835: Introduce proper clock handling ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - - - --- 2024-10-25 Stefan Wahren New
[V5,3/9] mmc: bcm2835: Fix type of current clock speed ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - - - --- 2024-10-25 Stefan Wahren New
[V5,2/9] dmaengine: bcm2835-dma: add suspend/resume pm support ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - - - --- 2024-10-25 Stefan Wahren New
[v2,2/2,RFC] usb: xhci: Don't queue redundant Stop Endpoint commands xhci: Fix the NEC stop bug workaround - - - --- 2024-10-25 Michał Pecio New
[v2,1/2] usb: xhci: Fix the NEC stop bug workaround xhci: Fix the NEC stop bug workaround - - - --- 2024-10-25 Michał Pecio New
usb: cdns3: avoid possible null_ptr_deref in cdns3_gadget_ep_queue usb: cdns3: avoid possible null_ptr_deref in cdns3_gadget_ep_queue - - - --- 2024-10-25 Chen Ridong New
[v2,6/6] drivers: usb: serial: mos7840: fix the quoted string split across lines usb: serial: mos7840: Fix coding style warnings - - - --- 2024-10-25 Tony Chung New
[v2,5/6] drivers: usb: serial: mos7840: replace 'unsigned' w/ 'unsigned int' usb: serial: mos7840: Fix coding style warnings - - - --- 2024-10-25 Tony Chung New
[v2,4/6] drivers: usb: serial: mos7840: using '__func__' to replace function name in dbg message usb: serial: mos7840: Fix coding style warnings - - - --- 2024-10-25 Tony Chung New
[v2,3/6] drivers: usb: serial: mos7840: fix coding style warnings usb: serial: mos7840: Fix coding style warnings - - - --- 2024-10-25 Tony Chung New
[v2,2/6] drivers: usb: serial: mos7840: Fix Block comments coding style warnings usb: serial: mos7840: Fix coding style warnings - - - --- 2024-10-25 Tony Chung New
[v2,1/6] driver: usb: serial: mos7840: fix style warnings usb: serial: mos7840: Fix coding style warnings - - - --- 2024-10-25 Tony Chung New
[GIT,PULL] USB4/Thunderbolt fixes for v6.12-rc5 [GIT,PULL] USB4/Thunderbolt fixes for v6.12-rc5 - - - --- 2024-10-25 Mika Westerberg New
AW: [PATCH] usb: typec: tcpci: Add FAULT_ALERT handling AW: [PATCH] usb: typec: tcpci: Add FAULT_ALERT handling - - - --- 2024-10-24 Yanik Fuchs New
[13/13] arm64: dts: allwinner: a100: Add CPU Operating Performance Points table sunxi: A100/A133 second stage support - - - --- 2024-10-24 Cody Eksal New
[12/13] cpufreq: sun50i: add a100 cpufreq support sunxi: A100/A133 second stage support - - - --- 2024-10-24 Cody Eksal New
[11/13] dt-bindings: opp: h6: Add A100 operating points sunxi: A100/A133 second stage support - - - --- 2024-10-24 Cody Eksal New
[10/13] arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node sunxi: A100/A133 second stage support - - - --- 2024-10-24 Cody Eksal New
[09/13] arm64: allwinner: a100: Add MMC related nodes sunxi: A100/A133 second stage support - 1 - --- 2024-10-24 Cody Eksal New
[08/13] arm64: allwinner: A100: enable EHCI, OHCI and USB PHY nodes in Perf1 sunxi: A100/A133 second stage support - - - --- 2024-10-24 Cody Eksal New
[07/13] arm64: dts: allwinner: a100: add usb related nodes sunxi: A100/A133 second stage support - - - --- 2024-10-24 Cody Eksal New
[06/13] phy: sun4i-usb: add support for A100 USB PHY sunxi: A100/A133 second stage support - - - --- 2024-10-24 Cody Eksal New
[05/13] dt-bindings: usb: sunxi-musb: Add A100 compatible string sunxi: A100/A133 second stage support - - - --- 2024-10-24 Cody Eksal New
[04/13] dt-bindings: usb: Add A100 compatible string sunxi: A100/A133 second stage support 1 1 - --- 2024-10-24 Cody Eksal New
[03/13] dt-bindings: phy: sun50i-a64: add a100 compatible sunxi: A100/A133 second stage support 1 - - --- 2024-10-24 Cody Eksal New
[02/13] arm64: dts: allwinner: a100: add watchdog node sunxi: A100/A133 second stage support - 1 - --- 2024-10-24 Cody Eksal New
[01/13] arm64: dts: allwinner: A100: Add PMU mode sunxi: A100/A133 second stage support - 1 - --- 2024-10-24 Cody Eksal New
net: usb: qmi_wwan: add Quectel RG650V net: usb: qmi_wwan: add Quectel RG650V - 1 - --- 2024-10-24 Benoît Monin New
USB: serial: option: add Quectel RG650V USB: serial: option: add Quectel RG650V - - - --- 2024-10-24 Benoît Monin New
[3/3] driver: usb: serial: mos7840: add more baudrate options drivers: usb: serial: mos7840: Improved baud rate support - - - --- 2024-10-24 Tony Chung New
[2/3] drivers: usb: serial: mos7840: added optimized register setups for common baudrates. drivers: usb: serial: mos7840: Improved baud rate support - - - --- 2024-10-24 Tony Chung New
[1/3] drivers: usb: serial: mos7840: Add defines for clock select register offset drivers: usb: serial: mos7840: Improved baud rate support - - - --- 2024-10-24 Tony Chung New
[v2,2/2] usb: typec: mux: Add support for the TUSB1046 crosspoint switch Add support for the TUSB1046-DCI Type-C crosspoint switch - 2 - --- 2024-10-24 Romain Gantois New
[v2,1/2] dt-bindings: usb: Describe TUSB1046 crosspoint switch Add support for the TUSB1046-DCI Type-C crosspoint switch - 1 - --- 2024-10-24 Romain Gantois New
[v4] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up [v4] USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up - - - --- 2024-10-24 duanchenghao New
[8/8] thunderbolt: debugfs: Implement asymmetric lane margining thunderbolt: Add support for USB4 v2 Gen 4 lane margining - - - --- 2024-10-23 Mika Westerberg New
[7/8] thunderbolt: debugfs: Don't hardcode margining results size thunderbolt: Add support for USB4 v2 Gen 4 lane margining - - - --- 2024-10-23 Mika Westerberg New
[6/8] thunderbolt: debugfs: Refactor hardware margining result parsing thunderbolt: Add support for USB4 v2 Gen 4 lane margining - - - --- 2024-10-23 Mika Westerberg New
[5/8] thunderbolt: debugfs: Replace margining lane numbers with an enum thunderbolt: Add support for USB4 v2 Gen 4 lane margining - - - --- 2024-10-23 Mika Westerberg New
[4/8] thunderbolt: debugfs: Replace "both lanes" with "all lanes" thunderbolt: Add support for USB4 v2 Gen 4 lane margining - - - --- 2024-10-23 Mika Westerberg New
[3/8] thunderbolt: debugfs: Implement Gen 4 margining eye selection thunderbolt: Add support for USB4 v2 Gen 4 lane margining - - - --- 2024-10-23 Mika Westerberg New
[2/8] thunderbolt: debugfs: Add USB4 Gen 4 margining capabilities thunderbolt: Add support for USB4 v2 Gen 4 lane margining - - - --- 2024-10-23 Mika Westerberg New
[1/8] thunderbolt: Don't hardcode margining capabilities size thunderbolt: Add support for USB4 v2 Gen 4 lane margining - - - --- 2024-10-23 Mika Westerberg New
[v3] usb: core: use sysfs_emit() instead of sprintf() [v3] usb: core: use sysfs_emit() instead of sprintf() - - - --- 2024-10-23 Jiayi Li New
arm64: dts: mediatek: mt8395-genio-1200-evk: add adc and led for mt6360 arm64: dts: mediatek: mt8395-genio-1200-evk: add adc and led for mt6360 - 1 - --- 2024-10-23 Macpaul Lin New
[v3,2/2] arm64: dts: mediatek: mt8395-genio-1200-evk: add support for MUX IT5205 [v3,1/2] arm64: dts: mediatek: mt8395-genio-1200-evk: add support for TCPC port - 1 - --- 2024-10-23 Macpaul Lin New
[v3,1/2] arm64: dts: mediatek: mt8395-genio-1200-evk: add support for TCPC port [v3,1/2] arm64: dts: mediatek: mt8395-genio-1200-evk: add support for TCPC port - - - --- 2024-10-23 Macpaul Lin New
[2/2] usb: typec: tcpm: Add support for parsing time dt properties Add support for time DT property in TCPM - 1 - --- 2024-10-23 Amit Sunil Dhamne New
[1/2] dt-bindings: connector: Add properties to define time values Add support for time DT property in TCPM - 1 - --- 2024-10-23 Amit Sunil Dhamne New
[v4] usb: core: adds support for PM control of specific USB dev skip suspend. [v4] usb: core: adds support for PM control of specific USB dev skip suspend. - - - --- 2024-10-23 huanglei New
usb: typec: tcpm: Prevent Hard_Reset if Vbus was never low usb: typec: tcpm: Prevent Hard_Reset if Vbus was never low - - - --- 2024-10-22 Yanik Fuchs New
[v3,4/4] arm64: dts: qcom: x1e80100-crd: Enable external DP usb: typec: Add new driver for Parade PS8830 Type-C Retimer - - - --- 2024-10-22 Abel Vesa New
[v3,3/4] arm64: dts: qcom: x1e80100-crd: Add Parade PS8830 related nodes usb: typec: Add new driver for Parade PS8830 Type-C Retimer - - - --- 2024-10-22 Abel Vesa New
[v3,2/4] usb: typec: Add support for Parade PS8830 Type-C Retimer usb: typec: Add new driver for Parade PS8830 Type-C Retimer - - - --- 2024-10-22 Abel Vesa New
[v3,1/4] dt-bindings: usb: Add Parade PS8830 Type-C retimer bindings usb: typec: Add new driver for Parade PS8830 Type-C Retimer - - - --- 2024-10-22 Abel Vesa New
usb: serial: mos7840: Add more kinds of baud rate usb: serial: mos7840: Add more kinds of baud rate - - - --- 2024-10-22 Tony Chung New
usb: add support for new USB device ID 0x17EF:0x3098 for the r8152 driver usb: add support for new USB device ID 0x17EF:0x3098 for the r8152 driver - 1 - --- 2024-10-20 Benjamin Große New
[v1] usb: storage: fix wrong comments for struct bulk_cb_wrap [v1] usb: storage: fix wrong comments for struct bulk_cb_wrap - - - --- 2024-10-20 Dingyan Li New
[v2] usb: storage: use US_BULK_FLAG_OUT instead of constant values [v2] usb: storage: use US_BULK_FLAG_OUT instead of constant values - - - --- 2024-10-20 Dingyan Li New
drivers/net/usb: Lenovo Mini Dock, add support for new USB device ID 0x17EF:0x3098 for the r8152 dr… drivers/net/usb: Lenovo Mini Dock, add support for new USB device ID 0x17EF:0x3098 for the r8152 dr… - - - --- 2024-10-19 Benjamin Große New
USB: serial: option: add Fibocom FG132 0x0112 composition USB: serial: option: add Fibocom FG132 0x0112 composition - - - --- 2024-10-18 Reinhard Speyerer New
r8152: fix deadlock in usb reset during resume r8152: fix deadlock in usb reset during resume - - - --- 2024-10-18 George-Daniel Matei New
[GIT,PULL] USB-serial device ids for 6.12-rc4 [GIT,PULL] USB-serial device ids for 6.12-rc4 - - - --- 2024-10-18 Johan Hovold New
dt-bindings: usb: qcom,dwc3: Add SAR2130P compatible dt-bindings: usb: qcom,dwc3: Add SAR2130P compatible 1 - - --- 2024-10-17 Dmitry Baryshkov New
[RFC] usb: typec: ucsi: Set orientation as none when connector is unplugged [RFC] usb: typec: ucsi: Set orientation as none when connector is unplugged - 3 - --- 2024-10-17 Abel Vesa New
[v2,5/5] phy: qcom: qmp-usbc: Add qmp configuration for QCS615 Add support for primary USB controller on QCS615 - 1 - --- 2024-10-17 Krishna Kurapati New
[v2,4/5] phy: qcom-qusb2: Add support for QCS615 Add support for primary USB controller on QCS615 - 1 - --- 2024-10-17 Krishna Kurapati New
[v2,1/5] dt-bindings: usb: qcom,dwc3: Add QCS615 to USB DWC3 bindings Add support for primary USB controller on QCS615 - 1 - --- 2024-10-17 Krishna Kurapati New
[8/8] usb: xhci: remove irrelevant comment usb: xhci: various xhci cleanups and improvements - - - --- 2024-10-17 Niklas Neronin New
[7/8] usb: xhci: add help function xhci_dequeue_td() usb: xhci: various xhci cleanups and improvements - - - --- 2024-10-17 Niklas Neronin New
[6/8] usb: xhci: refactor xhci_td_cleanup() to return void usb: xhci: various xhci cleanups and improvements - - - --- 2024-10-17 Niklas Neronin New
[5/8] usb: xhci: remove unused arguments from td_to_noop() usb: xhci: various xhci cleanups and improvements - - - --- 2024-10-17 Niklas Neronin New
[4/8] usb: xhci: improve xhci_clear_command_ring() usb: xhci: various xhci cleanups and improvements - - - --- 2024-10-17 Niklas Neronin New
[3/8] usb: xhci: request MSI/-X according to requested amount usb: xhci: various xhci cleanups and improvements - - - --- 2024-10-17 Niklas Neronin New
« 1 2 3 4 … 100 101 »