Show patches with: none      |   30216 patches
« 1 2 ... 5 6 7 … 302 303 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v3,2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95 [v3,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" 1 - - --- 2024-08-26 Xu Yang Superseded
[v3,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" [v3,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" - 1 - --- 2024-08-26 Xu Yang Superseded
[v2,5/5] sb: ux500: Use devm_clk_get_enabled() helpers usb drivers use devm_clk_get_enabled() helpers - - - --- 2024-08-26 Lei Liu Superseded
[v2,4/5] usb: mpfs: Use devm_clk_get_enabled() helpers usb drivers use devm_clk_get_enabled() helpers - - - --- 2024-08-26 Lei Liu Superseded
[v2,3/5] usb: r8a66597-udc: Use devm_clk_get_enabled() helpers usb drivers use devm_clk_get_enabled() helpers - - - --- 2024-08-26 Lei Liu Superseded
[v2,2/5] usb: pxa27x_udc: Use devm_clk_get_enabled() helpers usb drivers use devm_clk_get_enabled() helpers - - - --- 2024-08-26 Lei Liu Superseded
[v2,1/5] usb: aspeed_udc: Use devm_clk_get_enabled() helpers usb drivers use devm_clk_get_enabled() helpers - - - --- 2024-08-26 Lei Liu Superseded
[v2] usb: gadget: f_acm: make bInterfaceProtocol configurable [v2] usb: gadget: f_acm: make bInterfaceProtocol configurable - - - --- 2024-08-25 Michael Walle Accepted
[V2] wifi: ath6kl: Replace ath6kl_usb_submit_ctrl_in with usb_control_msg_recv [V2] wifi: ath6kl: Replace ath6kl_usb_submit_ctrl_in with usb_control_msg_recv - - - --- 2024-08-25 Edward Adam Davis Superseded
[v7] usb: gadget: u_serial: Add null pointer check in gs_read_complete & gs_write_complete [v7] usb: gadget: u_serial: Add null pointer check in gs_read_complete & gs_write_complete - - - --- 2024-08-25 胡连勤 Superseded
wifi: ath6kl: Check that the read operation returns a data length of 0 wifi: ath6kl: Check that the read operation returns a data length of 0 - - - --- 2024-08-25 Edward Adam Davis New
usb-storage: Constify struct usb_device_id and us_unusual_dev usb-storage: Constify struct usb_device_id and us_unusual_dev 1 - - --- 2024-08-24 Christophe JAILLET Accepted
[v25,33/33] ASoC: usb: Rediscover USB SND devices on USB port add Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,32/33] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,31/33] ALSA: usb-audio: Add USB offload route kcontrol Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,30/33] ALSA: usb-audio: qcom: Use card and PCM index from QMI request Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,29/33] ALSA: usb-audio: qcom: Don't allow USB offload path if PCM device is in use Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,28/33] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,27/33] ALSA: usb-audio: qcom: Add USB QMI definitions Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,26/33] ALSA: usb-audio: Prevent starting of audio stream if in use Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,25/33] ALSA: usb-audio: Save UAC sample size information Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,24/33] ALSA: usb-audio: Introduce USB SND platform op callbacks Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,23/33] ASoC: qcom: qdsp6: Fetch USB offload mapped card and PCM device Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,22/33] ASoC: qcom: qdsp6: Add headphone jack for offload connection status Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,21/33] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6 Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,20/33] ASoC: qcom: qdsp6: q6afe: Increase APR timeout Introduce QC USB SND audio offloading support - 1 - --- 2024-08-23 Wesley Cheng Superseded
[v25,19/33] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,18/33] ASoC: dt-bindings: Update example for enabling USB offload on SM8250 Introduce QC USB SND audio offloading support 1 - - --- 2024-08-23 Wesley Cheng Superseded
[v25,17/33] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port Introduce QC USB SND audio offloading support 1 - - --- 2024-08-23 Wesley Cheng Superseded
[v25,16/33] ASoC: doc: Add documentation for SOC USB Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,15/33] ASoC: usb: Fetch ASoC card and pcm device information Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,14/33] ASoC: usb: Create SOC USB SND jack kcontrol Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,13/33] ASoC: usb: Add PCM format check API for USB backend Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,12/33] ASoC: Add SOC USB APIs for adding an USB backend Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,11/33] ALSA: usb-audio: Check for support for requested audio format Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,10/33] ALSA: usb-audio: Export USB SND APIs for modules Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,09/33] ALSA: Add USB audio device jack type Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,08/33] usb: dwc3: Specify maximum number of XHCI interrupters Introduce QC USB SND audio offloading support 1 - - --- 2024-08-23 Wesley Cheng Superseded
[v25,07/33] usb: host: xhci-plat: Set XHCI max interrupters if property is present Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,06/33] usb: host: xhci-mem: Allow for interrupter clients to choose specific index Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,05/33] usb: host: xhci-mem: Cleanup pending secondary event ring events Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,04/33] usb: xhci: Allow for secondary interrupter to set IMOD Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,03/33] xhci: sideband: add initial api to register a sideband entity Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,02/33] usb: host: xhci: Repurpose event handler for skipping interrupter events Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
[v25,01/33] xhci: add helper to stop endpoint and wait for completion Introduce QC USB SND audio offloading support - - - --- 2024-08-23 Wesley Cheng Superseded
USB: serial: qcserial: add support for Sierra Wireless EM7511 USB: serial: qcserial: add support for Sierra Wireless EM7511 - - - --- 2024-08-23 Alon Bar-Lev New
[v5,5/5] PCI: Drop Radeon quirk for Macbook Pro 8.2 Verify devices transition from D3cold to D0 - - - --- 2024-08-23 Mario Limonciello New
[v5,4/5] PCI: Allow Ryzen XHCI controllers into D3cold and drop delays Verify devices transition from D3cold to D0 - - - --- 2024-08-23 Mario Limonciello New
[v5,3/5] PCI: Verify functions currently in D3cold have entered D0 Verify devices transition from D3cold to D0 - 1 - --- 2024-08-23 Mario Limonciello New
[v5,2/5] PCI: Check PCI_PM_CTRL instead of PCI_COMMAND in pci_dev_wait() Verify devices transition from D3cold to D0 - - - --- 2024-08-23 Mario Limonciello New
[v5,1/5] PCI: Use an enum for reset type in pci_dev_wait() Verify devices transition from D3cold to D0 - - - --- 2024-08-23 Mario Limonciello New
usb: chipidea: udc: enable suspend interrupt after usb reset usb: chipidea: udc: enable suspend interrupt after usb reset 1 - - --- 2024-08-23 Xu Yang Accepted
[v9,3/3] tools: usb: p9_fwd: add usb gadget packet forwarder script usb: gadget: 9pfs transport - - - --- 2024-08-23 Michael Grzeschik Superseded
[v9,2/3] net/9p/usbg: Add new usb gadget function transport usb: gadget: 9pfs transport - - 1 --- 2024-08-23 Michael Grzeschik Superseded
[v9,1/3] usb: gadget: function: move u_f.h to include/linux/usb/func_utils.h usb: gadget: 9pfs transport - - - --- 2024-08-23 Michael Grzeschik Superseded
usb: dwc3: core: Set GUCTL1[29] to ignore single SE0 glitch for FS/LS operation usb: dwc3: core: Set GUCTL1[29] to ignore single SE0 glitch for FS/LS operation - - - --- 2024-08-23 UTTKARSH AGGARWAL New
[v4,5/5] PCI: Drop Radeon quirk for Macbook Pro 8.2 Verify devices transition from D3cold to D0 - - - --- 2024-08-23 Mario Limonciello Superseded
[v4,4/5] PCI: Allow Ryzen XHCI controllers into D3cold and drop delays Verify devices transition from D3cold to D0 1 - - --- 2024-08-23 Mario Limonciello Superseded
[v4,3/5] PCI: Verify functions currently in D3cold have entered D0 Verify devices transition from D3cold to D0 - 1 - --- 2024-08-23 Mario Limonciello Superseded
[v4,2/5] PCI: Check PCI_PM_CTRL instead of PCI_COMMAND in pci_dev_wait() Verify devices transition from D3cold to D0 - - - --- 2024-08-23 Mario Limonciello Superseded
x86/tsc: Use rdtsc_ordered() when RDTSCP or LFENCE_RDTSC are supported x86/tsc: Use rdtsc_ordered() when RDTSCP or LFENCE_RDTSC are supported - - - --- 2024-08-23 Mario Limonciello New
[v4,1/5] PCI: Use an enum for reset type in pci_dev_wait() Verify devices transition from D3cold to D0 - 1 - --- 2024-08-23 Mario Limonciello Superseded
[v3] usb: roles: add lockdep class key to struct usb_role_switch [v3] usb: roles: add lockdep class key to struct usb_role_switch - 2 - --- 2024-08-22 Amit Sunil Dhamne Accepted
[16/16] arm64: defconfig: Enable RZ/G3S SYSC reset driver Add initial USB support for the Renesas RZ/G3S SoC - - - --- 2024-08-22 claudiu beznea New
[15/16] arm64: dts: renesas: rzg3s-smarc: Enable USB support Add initial USB support for the Renesas RZ/G3S SoC - - - --- 2024-08-22 claudiu beznea New
[14/16] arm64: dts: renesas: r9a08g045: Add USB support Add initial USB support for the Renesas RZ/G3S SoC - - - --- 2024-08-22 claudiu beznea New
[13/16] arm64: dts: renesas: Add #reset-cells to system controller node Add initial USB support for the Renesas RZ/G3S SoC - - - --- 2024-08-22 claudiu beznea New
[12/16] phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC Add initial USB support for the Renesas RZ/G3S SoC - - - --- 2024-08-22 claudiu beznea Accepted
[11/16] dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings Add initial USB support for the Renesas RZ/G3S SoC 1 - - --- 2024-08-22 claudiu beznea Accepted
[10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus Add initial USB support for the Renesas RZ/G3S SoC - - - --- 2024-08-22 claudiu beznea Accepted
[09/16] dt-bindings: usb: renesas,usbhs: Document RZ/G3S SoC Add initial USB support for the Renesas RZ/G3S SoC 1 - - --- 2024-08-22 claudiu beznea New
[08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S Add initial USB support for the Renesas RZ/G3S SoC - - - --- 2024-08-22 claudiu beznea New
[07/16] reset: rzg2l-usbphy-ctrl: Get reset control array Add initial USB support for the Renesas RZ/G3S SoC - - - --- 2024-08-22 claudiu beznea New
[06/16] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S SoC Add initial USB support for the Renesas RZ/G3S SoC - 1 - --- 2024-08-22 claudiu beznea New
[05/16] soc: renesas: sysc: Move RZ/G3S SoC detection on SYSC driver Add initial USB support for the Renesas RZ/G3S SoC - - - --- 2024-08-22 claudiu beznea New
[04/16] soc: renesas: Add SYSC driver for Renesas RZ/G3S Add initial USB support for the Renesas RZ/G3S SoC - - - --- 2024-08-22 claudiu beznea New
[03/16] dt-bindings: reset: renesas,r9a08g045-sysc: Add reset IDs for RZ/G3S SYSC reset Add initial USB support for the Renesas RZ/G3S SoC 1 - - --- 2024-08-22 claudiu beznea New
[02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S Add initial USB support for the Renesas RZ/G3S SoC 1 - - --- 2024-08-22 claudiu beznea New
[01/16] clk: renesas: r9a08g045: Add clocks, resets and power domains for USB Add initial USB support for the Renesas RZ/G3S SoC - 1 - --- 2024-08-22 claudiu beznea Accepted
[RFT] xhci: dbc: Fix STALL transfer event handling [RFT] xhci: dbc: Fix STALL transfer event handling - - - --- 2024-08-22 Mathias Nyman Accepted
[-next,4/4] usb: ehci-brcm: fix module autoloading usb: fix module autoloading 1 - - --- 2024-08-22 Liao Chen Accepted
[-next,3/4] usb: typec: fix module autoloading usb: fix module autoloading 1 - - --- 2024-08-22 Liao Chen Accepted
[-next,2/4] usb: misc: brcmstb-usb-pinmap: fix module autoloading usb: fix module autoloading 1 - - --- 2024-08-22 Liao Chen Accepted
[-next,1/4] usb: phy: phy-gpio-vbus-usb: fix module autoloading usb: fix module autoloading - - - --- 2024-08-22 Liao Chen Accepted
usb: dwc3: core: update LC timer as per USB Spec V3.2 usb: dwc3: core: update LC timer as per USB Spec V3.2 1 - - --- 2024-08-22 Faisal Hassan Superseded
[v1,5/5] usb: ux500: Use devm_clk_get_enabled() helpers usb drivers use devm_clk_get_enabled() helpers - - - --- 2024-08-22 Lei Liu Superseded
[v1,4/5] usb: mpfs: Use devm_clk_get_enabled() helpers usb drivers use devm_clk_get_enabled() helpers - - - --- 2024-08-22 Lei Liu Superseded
[v1,3/5] usb: r8a66597-udc: Use devm_clk_get_enabled() helpers usb drivers use devm_clk_get_enabled() helpers - - - --- 2024-08-22 Lei Liu Superseded
[v1,2/5] usb: pxa27x_udc: Use devm_clk_get_enabled() helpers usb drivers use devm_clk_get_enabled() helpers - - - --- 2024-08-22 Lei Liu Superseded
[v1,1/5] usb: aspeed_udc: Use devm_clk_get_enabled() helpers usb drivers use devm_clk_get_enabled() helpers - - - --- 2024-08-22 Lei Liu Superseded
[v6] usb: gadget: u_serial: Add null pointer check in gs_read_complete & gs_write_complete [v6] usb: gadget: u_serial: Add null pointer check in gs_read_complete & gs_write_complete - - - --- 2024-08-22 胡连勤 Superseded
[V3,9/9] ARM: bcm2835_defconfig: Enable SUSPEND ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - 1 - --- 2024-08-21 Stefan Wahren New
[V3,RFC,8/9] usb: dwc2: Implement recovery after PM domain off ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - 1 - --- 2024-08-21 Stefan Wahren New
[V3,7/9] usb: dwc2: Refactor backup/restore of registers ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - - - --- 2024-08-21 Stefan Wahren New
[V3,6/9] drm/vc4: v3d: add PM suspend/resume support ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - - - --- 2024-08-21 Stefan Wahren New
[V3,5/9] drm/vc4: v3d: simplify clock retrieval ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - 1 - --- 2024-08-21 Stefan Wahren New
[V3,4/9] drm/vc4: hdmi: add PM suspend/resume support ARM: bcm2835: Implement initial S2Idle for Raspberry Pi 1 - - --- 2024-08-21 Stefan Wahren New
[V3,3/9] drm/vc4: Get the rid of DRM_ERROR() ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - 2 - --- 2024-08-21 Stefan Wahren New
[V3,2/9] drm/vc4: hdmi: Handle error case of pm_runtime_resume_and_get ARM: bcm2835: Implement initial S2Idle for Raspberry Pi 1 1 - --- 2024-08-21 Stefan Wahren New
[V3,1/9] mailbox: bcm2835: Fix timeout during suspend mode ARM: bcm2835: Implement initial S2Idle for Raspberry Pi - 1 - --- 2024-08-21 Stefan Wahren New
« 1 2 ... 5 6 7 … 302 303 »