@@ -19075,7 +19075,15 @@ L: netdev@vger.kernel.org
S: Maintained
W: https://github.com/petkan/rtl8150
T: git git://github.com/petkan/rtl8150.git
-F: drivers/net/usb/rtl8150.c
+F: drivers/net/usb/realtek/rtl8150.c
+
+USB RTL8152 DRIVER
+L: nic_swsd@realtek.com
+L: linux-usb@vger.kernel.org
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/usb/realtek/*
+X: drivers/net/usb/realtek/rtl8150.c
USB SERIAL SUBSYSTEM
M: Johan Hovold <johan@kernel.org>
@@ -85,27 +85,7 @@ config USB_PEGASUS
To compile this driver as a module, choose M here: the
module will be called pegasus.
-config USB_RTL8150
- tristate "USB RTL8150 based ethernet device support"
- select MII
- help
- Say Y here if you have RTL8150 based usb-ethernet adapter.
- Send me <petkan@users.sourceforge.net> any comments you may have.
- You can also check for updates at <http://pegasus2.sourceforge.net/>.
-
- To compile this driver as a module, choose M here: the
- module will be called rtl8150.
-
-config USB_RTL8152
- tristate "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
- select MII
- help
- This option adds support for Realtek RTL8152 based USB 2.0
- 10/100 Ethernet adapters and RTL8153 based USB 3.0 10/100/1000
- Ethernet adapters.
-
- To compile this driver as a module, choose M here: the
- module will be called r8152.
+source "drivers/net/usb/realtek/Kconfig"
config USB_LAN78XX
tristate "Microchip LAN78XX Based USB Ethernet Adapters"
@@ -630,12 +610,4 @@ config USB_NET_AQC111
This driver should work with at least the following devices:
* Aquantia AQtion USB to 5GbE
-config USB_RTL8153_ECM
- tristate "RTL8153 ECM support"
- depends on USB_NET_CDCETHER && (USB_RTL8152 || USB_RTL8152=n)
- help
- This option supports ECM mode for RTL8153 ethernet adapter, when
- CONFIG_USB_RTL8152 is not set, or the RTL8153 device is not
- supported by r8152 driver.
-
endif # USB_NET_DRIVERS
@@ -6,8 +6,7 @@
obj-$(CONFIG_USB_CATC) += catc.o
obj-$(CONFIG_USB_KAWETH) += kaweth.o
obj-$(CONFIG_USB_PEGASUS) += pegasus.o
-obj-$(CONFIG_USB_RTL8150) += rtl8150.o
-obj-$(CONFIG_USB_RTL8152) += r8152.o
+obj-y += realtek/
obj-$(CONFIG_USB_HSO) += hso.o
obj-$(CONFIG_USB_LAN78XX) += lan78xx.o
obj-$(CONFIG_USB_NET_AX8817X) += asix.o
@@ -41,4 +40,3 @@ obj-$(CONFIG_USB_NET_QMI_WWAN) += qmi_wwan.o
obj-$(CONFIG_USB_NET_CDC_MBIM) += cdc_mbim.o
obj-$(CONFIG_USB_NET_CH9200) += ch9200.o
obj-$(CONFIG_USB_NET_AQC111) += aqc111.o
-obj-$(CONFIG_USB_RTL8153_ECM) += r8153_ecm.o
new file mode 100644
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Reatlek USB Network devices configuration
+#
+config USB_RTL8150
+ tristate "USB RTL8150 based ethernet device support"
+ select MII
+ help
+ Say Y here if you have RTL8150 based usb-ethernet adapter.
+ Send me <petkan@users.sourceforge.net> any comments you may have.
+ You can also check for updates at <http://pegasus2.sourceforge.net/>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtl8150.
+
+config USB_RTL8152
+ tristate "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
+ select MII
+ help
+ This option adds support for Realtek RTL8152 based USB 2.0
+ 10/100 Ethernet adapters and RTL8153 based USB 3.0 10/100/1000
+ Ethernet adapters.
+
+ To compile this driver as a module, choose M here: the
+ module will be called r8152.
+
+config USB_RTL8153_ECM
+ tristate "RTL8153 ECM support"
+ depends on USB_NET_CDCETHER && (USB_RTL8152 || USB_RTL8152=n)
+ help
+ This option supports ECM mode for RTL8153 ethernet adapter, when
+ CONFIG_USB_RTL8152 is not set, or the RTL8153 device is not
+ supported by r8152 driver.
new file mode 100644
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the Realtek USB network device drivers.
+#
+
+obj-$(CONFIG_USB_RTL8150) += rtl8150.o
+obj-$(CONFIG_USB_RTL8152) += r8152.o
+obj-$(CONFIG_USB_RTL8153_ECM) += r8153_ecm.o
similarity index 100%
rename from drivers/net/usb/r8152.c
rename to drivers/net/usb/realtek/r8152.c
similarity index 100%
rename from drivers/net/usb/r8153_ecm.c
rename to drivers/net/usb/realtek/r8153_ecm.c
similarity index 100%
rename from drivers/net/usb/rtl8150.c
rename to drivers/net/usb/realtek/rtl8150.c
Move r8152.c, rtl8150.c, and r8153_ecm.c from drivers/net/usb to drivers/net/usb/realtek. Signed-off-by: Hayes Wang <hayeswang@realtek.com> --- MAINTAINERS | 10 ++++++- drivers/net/usb/Kconfig | 30 +-------------------- drivers/net/usb/Makefile | 4 +-- drivers/net/usb/realtek/Kconfig | 33 +++++++++++++++++++++++ drivers/net/usb/realtek/Makefile | 8 ++++++ drivers/net/usb/{ => realtek}/r8152.c | 0 drivers/net/usb/{ => realtek}/r8153_ecm.c | 0 drivers/net/usb/{ => realtek}/rtl8150.c | 0 8 files changed, 52 insertions(+), 33 deletions(-) create mode 100644 drivers/net/usb/realtek/Kconfig create mode 100644 drivers/net/usb/realtek/Makefile rename drivers/net/usb/{ => realtek}/r8152.c (100%) rename drivers/net/usb/{ => realtek}/r8153_ecm.c (100%) rename drivers/net/usb/{ => realtek}/rtl8150.c (100%)