diff mbox series

[v2,6/7] phy: qcom-usb-hs: Fix unbalanced notifier registration

Message ID 1535362415-16559-6-git-send-email-loic.poulain@linaro.org (mailing list archive)
State New, archived
Headers show
Series [v2,1/7] usb: chipidea: Add dynamic pinctrl selection | expand

Commit Message

Loic Poulain Aug. 27, 2018, 9:33 a.m. UTC 
Phy power on/off cycle can happen several times during device life.
We then need to balance the extcon notifier registration accordingly.

Fixes: f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
---
 v2: don't use devres version (power-on always followed by power-off)

 drivers/phy/qualcomm/phy-qcom-usb-hs.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
index 2d0c70b..18da6e2 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
@@ -159,8 +159,8 @@  static int qcom_usb_hs_phy_power_on(struct phy *phy)
 		/* setup initial state */
 		qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state,
 					      uphy->vbus_edev);
-		ret = devm_extcon_register_notifier(&ulpi->dev, uphy->vbus_edev,
-				EXTCON_USB, &uphy->vbus_notify);
+		ret = extcon_register_notifier(uphy->vbus_edev, EXTCON_USB,
+					       &uphy->vbus_notify);
 		if (ret)
 			goto err_ulpi;
 	}
@@ -181,6 +181,11 @@  static int qcom_usb_hs_phy_power_off(struct phy *phy)
 {
 	struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
 
+	if (uphy->vbus_edev) {
+		extcon_unregister_notifier(uphy->vbus_edev, EXTCON_USB,
+					   &uphy->vbus_notify);
+	}
+
 	regulator_disable(uphy->v3p3);
 	regulator_disable(uphy->v1p8);
 	clk_disable_unprepare(uphy->sleep_clk);