diff mbox series

[v7,03/10] usb: dwc3: gadget: handle stream events

Message ID 1543662811-5194-4-git-send-email-anurag.kumar.vulisha@xilinx.com (mailing list archive)
State New, archived
Headers show
Series usb: dwc3: Fix broken BULK stream support to dwc3 gadget driver | expand

Commit Message

Anurag Kumar Vulisha Dec. 1, 2018, 11:13 a.m. UTC 
When bulk streams are enabled, the udc/core.c starts
the timer for every request queued. This timer needs
to be deleted by the gadget driver when a valid stream
event is found. This is done to avoid the deadlock
situation which occurs when streams are enabled. This
patch modifies the code to delete the pending timer for
the request matching the streamid found in the event.

Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
---
 Changes in v7:
	1. This patch is newly added into this series
---
 drivers/usb/dwc3/gadget.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 9faad89..319a3ed 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2438,6 +2438,28 @@  static void dwc3_gadget_endpoint_transfer_not_ready(struct dwc3_ep *dep,
 	__dwc3_gadget_start_isoc(dep);
 }
 
+static void dwc3_endpoint_stream_event(struct dwc3 *dwc,
+				       const struct dwc3_event_depevt *event)
+{
+	struct dwc3_ep		*dep;
+	struct dwc3_request	*req;
+	u8			epnum = event->endpoint_number;
+	u8			stream_id;
+
+	dep = dwc->eps[epnum];
+
+	stream_id = event->parameters;
+
+	/* Check for request matching the streamid and delete the timer */
+	list_for_each_entry(req, &dep->started_list, list) {
+		if (req->request.stream_id == stream_id) {
+			if (timer_pending(&req->request.req_timeout_timer))
+				del_timer(&req->request.req_timeout_timer);
+			break;
+		}
+	}
+}
+
 static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event)
 {
@@ -2477,6 +2499,9 @@  static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 		}
 		break;
 	case DWC3_DEPEVT_STREAMEVT:
+		if (event->status == DEPEVT_STREAMEVT_FOUND)
+			dwc3_endpoint_stream_event(dwc, event);
+
 	case DWC3_DEPEVT_XFERCOMPLETE:
 	case DWC3_DEPEVT_RXTXFIFOEVT:
 		break;