@@ -145,6 +145,7 @@ static const int xr_hal_table[MAX_XR_MODELS][MAX_XR_HAL_TYPE] = {
struct xr_port_private {
enum xr_model model;
+ unsigned int channel;
};
static int xr_set_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 val)
@@ -153,6 +154,14 @@ static int xr_set_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 val)
struct usb_serial *serial = port->serial;
int ret;
+ switch (port_priv->model) {
+ case XR21V141X:
+ if (port_priv->channel)
+ reg |= (port_priv->channel - 1) << 8;
+ break;
+ default:
+ return -EINVAL;
+ };
ret = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
xr_hal_table[port_priv->model][REQ_SET],
@@ -178,6 +187,14 @@ static int xr_get_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 *val)
if (!dmabuf)
return -ENOMEM;
+ switch (port_priv->model) {
+ case XR21V141X:
+ if (port_priv->channel)
+ reg |= (port_priv->channel - 1) << 8;
+ break;
+ default:
+ return -EINVAL;
+ };
ret = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
xr_hal_table[port_priv->model][REQ_GET],
@@ -601,17 +618,24 @@ static void xr_close(struct usb_serial_port *port)
static int xr_probe(struct usb_serial *serial, const struct usb_device_id *id)
{
+ struct usb_interface *intf = serial->interface;
+ struct usb_endpoint_descriptor *data_ep;
struct xr_port_private *port_priv;
+ int ifnum;
- /* Don't bind to control interface */
- if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 0)
+ /* Attach only data interfaces */
+ ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+ if (!(ifnum % 2))
return -ENODEV;
port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
if (!port_priv)
return -ENOMEM;
+ data_ep = &intf->cur_altsetting->endpoint[0].desc;
+
port_priv->model = id->driver_info;
+ port_priv->channel = data_ep->bEndpointAddress;
usb_set_serial_data(serial, port_priv);
@@ -628,6 +652,8 @@ static void xr_disconnect(struct usb_serial *serial)
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x04e2, 0x1410), .driver_info = XR21V141X},
+ { USB_DEVICE(0x04e2, 0x1412), .driver_info = XR21V141X},
+ { USB_DEVICE(0x04e2, 0x1414), .driver_info = XR21V141X},
{ }
};
MODULE_DEVICE_TABLE(usb, id_table);
XR21V1412 and XR21V1414 have exactly the same interface, but they support multiple 2 and 4 ports, respectively. On such devices, the "CDC Union" field shows how they're grouped, as can be seen on those lsusb -v outputs: https://linux-usb.vger.kernel.narkive.com/YaTYwHkM/usb-uart-device-from-exar-co-not-working-with-cdc-acm-but-usbserial https://jquery.developreference.com/article/22043997/udev+rule+with+bInterfaceNumber+doesn't+work+%5bclosed%5d So, for instance, on XR21V1414, (0x04e2:0x1414), the 3rd port is: CDC Union: bMasterInterface 4 bSlaveInterface 5 CDC Call Management: bmCapabilities 0x01 call management bDataInterface 5 In other words, the control interface is an even number, and the data interface is the next odd number. The logic to get the proper register for an specific channel came from this patch: https://lore.kernel.org/linux-usb/20180404070634.nhspvmxcjwfgjkcv@advantechmxl-desktop Add support for them. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- drivers/usb/serial/xr_serial.c | 30 ++++++++++++++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-)