diff mbox series

[v2,1/3] doc: dt: bindings: usb: dwc3: Update entries for disabling U1 and U2

Message ID 1557302091-7455-2-git-send-email-anurag.kumar.vulisha@xilinx.com (mailing list archive)
State Superseded
Headers show
Series usb: gadget: Add support for disabling U1 and U2 entries | expand

Commit Message

Anurag Kumar Vulisha May 8, 2019, 7:54 a.m. UTC 
This patch updates the documentation with the information related
to the quirks that needs to be added for disabling the link entering
into the U1 and U2 states

Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
---
 Changes in v2
	1. As suggested by Thinh Nguyen changed the "snps,dis_u1_entry_quirk"
	   to "snps,dis-u1-entry-quirk"
---
 Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 8e5265e..66780a4 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -64,6 +64,8 @@  Optional properties:
  - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy.
  - snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG,
 			disabling the suspend signal to the PHY.
+ - snps,dis-u1-entry-quirk: set if link entering into U1 needs to be disabled.
+ - snps,dis-u2-entry-quirk: set if link entering into U2 needs to be disabled.
  - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection
 			in PHY P3 power state.
  - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists