diff mbox series

[1/5] xhci: update bounce buffer with correct sg num

Message ID 1558524841-25397-2-git-send-email-mathias.nyman@linux.intel.com (mailing list archive)
State Superseded
Commit 597c56e372dab2c7f79b8d700aad3a5deebf9d1b
Headers show
Series xhci fixes for usb-linus | expand

Commit Message

Mathias Nyman May 22, 2019, 11:33 a.m. UTC 
From: Henry Lin <henryl@nvidia.com>

This change fixes a data corruption issue occurred on USB hard disk for
the case that bounce buffer is used during transferring data.

While updating data between sg list and bounce buffer, current
implementation passes mapped sg number (urb->num_mapped_sgs) to
sg_pcopy_from_buffer() and sg_pcopy_to_buffer(). This causes data
not get copied if target buffer is located in the elements after
mapped sg elements. This change passes sg number for full list to
fix issue.

Besides, for copying data from bounce buffer, calling dma_unmap_single()
on the bounce buffer before copying data to sg list can avoid cache issue.

Fixes: f9c589e142d0 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-ring.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index fed3385..ef7c869 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -656,6 +656,7 @@  static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci,
 	struct device *dev = xhci_to_hcd(xhci)->self.controller;
 	struct xhci_segment *seg = td->bounce_seg;
 	struct urb *urb = td->urb;
+	size_t len;
 
 	if (!ring || !seg || !urb)
 		return;
@@ -666,11 +667,14 @@  static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci,
 		return;
 	}
 
-	/* for in tranfers we need to copy the data from bounce to sg */
-	sg_pcopy_from_buffer(urb->sg, urb->num_mapped_sgs, seg->bounce_buf,
-			     seg->bounce_len, seg->bounce_offs);
 	dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
 			 DMA_FROM_DEVICE);
+	/* for in tranfers we need to copy the data from bounce to sg */
+	len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf,
+			     seg->bounce_len, seg->bounce_offs);
+	if (len != seg->bounce_len)
+		xhci_warn(xhci, "WARN Wrong bounce buffer read length: %ld != %d\n",
+				len, seg->bounce_len);
 	seg->bounce_len = 0;
 	seg->bounce_offs = 0;
 }
@@ -3127,6 +3131,7 @@  static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len,
 	unsigned int unalign;
 	unsigned int max_pkt;
 	u32 new_buff_len;
+	size_t len;
 
 	max_pkt = usb_endpoint_maxp(&urb->ep->desc);
 	unalign = (enqd_len + *trb_buff_len) % max_pkt;
@@ -3157,8 +3162,12 @@  static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len,
 
 	/* create a max max_pkt sized bounce buffer pointed to by last trb */
 	if (usb_urb_dir_out(urb)) {
-		sg_pcopy_to_buffer(urb->sg, urb->num_mapped_sgs,
+		len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
 				   seg->bounce_buf, new_buff_len, enqd_len);
+		if (len != seg->bounce_len)
+			xhci_warn(xhci,
+				"WARN Wrong bounce buffer write length: %ld != %d\n",
+				len, seg->bounce_len);
 		seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
 						 max_pkt, DMA_TO_DEVICE);
 	} else {