diff mbox series

[v8,02/11] dt-bindings: connector: add optional properties for Type-B

Message ID 1563958245-6321-3-git-send-email-chunfeng.yun@mediatek.com (mailing list archive)
State Superseded
Headers show
Series add USB GPIO based connection detection driver | expand

Commit Message

Chunfeng Yun (云春峰) July 24, 2019, 8:50 a.m. UTC
Add id-gpios, vbus-gpios, vbus-supply and pinctrl properties for
usb-b-connector

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
v8 no changes
v7 no changes
v6 no changes

v5 changes:
 1. add reviewed by Rob

v4 no changes

v3 changes:
 1. add GPIO direction, and use fixed-regulator for GPIO controlled
    VBUS regulator suggested by Rob;

v2 changes:
 1. describe more clear for vbus-gpios and vbus-supply suggested by Hans
---
 .../bindings/connector/usb-connector.txt           | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Linus Walleij Aug. 5, 2019, 10:09 a.m. UTC | #1
On Wed, Jul 24, 2019 at 10:51 AM Chunfeng Yun <chunfeng.yun@mediatek.com> wrote:

> Add id-gpios, vbus-gpios, vbus-supply and pinctrl properties for
> usb-b-connector
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> v8 no changes

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt
index cef556d4e5ee..d357987181ee 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.txt
+++ b/Documentation/devicetree/bindings/connector/usb-connector.txt
@@ -17,6 +17,20 @@  Optional properties:
 - self-powered: Set this property if the usb device that has its own power
   source.
 
+Optional properties for usb-b-connector:
+- id-gpios: an input gpio for USB ID pin.
+- vbus-gpios: an input gpio for USB VBUS pin, used to detect presence of
+  VBUS 5V.
+  see gpio/gpio.txt.
+- vbus-supply: a phandle to the regulator for USB VBUS if needed when host
+  mode or dual role mode is supported.
+  Particularly, if use an output GPIO to control a VBUS regulator, should
+  model it as a regulator.
+  see regulator/fixed-regulator.yaml
+- pinctrl-names : a pinctrl state named "default" is optional
+- pinctrl-0 : pin control group
+  see pinctrl/pinctrl-bindings.txt
+
 Optional properties for usb-c-connector:
 - power-role: should be one of "source", "sink" or "dual"(DRP) if typec
   connector has power support.