@@ -18,6 +18,12 @@
#include "mtu3.h"
#include "mtu3_dr.h"
+/* mt8183 etc */
+#define PERI_WK_CTRL0 0x20
+#define WC0_IS_C(x) (((x) & 0xf) << 28) /* cycle debounce */
+#define WC0_IS_EN BIT(12)
+#define WC0_IS_P BIT(6) /* polarity for ip sleep */
+
/* mt8173 etc */
#define PERI_WK_CTRL1 0x4
#define WC1_IS_C(x) (((x) & 0xf) << 26) /* cycle debounce */
@@ -30,7 +36,8 @@
#define SSC_SPM_INT_EN BIT(1)
enum ssusb_uwk_vers {
- SSUSB_UWK_V1 = 1,
+ SSUSB_UWK_V0 = 0,
+ SSUSB_UWK_V1,
SSUSB_UWK_V2,
};
@@ -43,6 +50,11 @@ static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
u32 reg, msk, val;
switch (ssusb->uwk_vers) {
+ case SSUSB_UWK_V0:
+ reg = ssusb->uwk_reg_base + PERI_WK_CTRL0;
+ msk = WC0_IS_EN | WC0_IS_C(0xf) | WC0_IS_P;
+ val = enable ? (WC0_IS_EN | WC0_IS_C(0x8)) : 0;
+ break;
case SSUSB_UWK_V1:
reg = ssusb->uwk_reg_base + PERI_WK_CTRL1;
msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;
Support USB wakeup by ip-sleep mode for MT8183, it's similar to MT8173 Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- drivers/usb/mtu3/mtu3_host.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)