From patchwork Mon Sep 16 11:41:00 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Chandana Kishori Chiluveru X-Patchwork-Id: 11146905 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 4A726184E for ; Mon, 16 Sep 2019 11:42:00 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 2852D206A4 for ; Mon, 16 Sep 2019 11:42:00 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="key not found in DNS" (0-bit key) header.d=codeaurora.org header.i=@codeaurora.org header.b="KccLNkMd"; dkim=fail reason="key not found in DNS" (0-bit key) header.d=codeaurora.org header.i=@codeaurora.org header.b="bls6HF9P" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1732311AbfIPLl7 (ORCPT ); Mon, 16 Sep 2019 07:41:59 -0400 Received: from smtp.codeaurora.org ([198.145.29.96]:48758 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725912AbfIPLl7 (ORCPT ); Mon, 16 Sep 2019 07:41:59 -0400 Received: by smtp.codeaurora.org (Postfix, from userid 1000) id 58D3B6133A; Mon, 16 Sep 2019 11:41:58 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=codeaurora.org; s=default; t=1568634118; bh=i3TvR9VBOENHp0uYAk8SA6fq9iHDYlbwKazrvJk3C/o=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=KccLNkMdQzNGocQDSlvqkbCJeSDY5HecGEbY1OhV6Dw1I2lRgaCgfx88BH//QpSc2 kLrxDwOBQyG89rT72zrDQjWXjE1lphhpASdLd1JgfKDjJiRkoKIhVtUx/iaR72xZBN RKf93WN5kO8nUcLSGVKllJaF3OGh6ONmMxQfluDM= X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on pdx-caf-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-2.7 required=2.0 tests=ALL_TRUSTED,BAYES_00, DKIM_INVALID,DKIM_SIGNED,SPF_NONE autolearn=no autolearn_force=no version=3.4.0 Received: from cchiluve-linux.qualcomm.com (blr-c-bdr-fw-01_globalnat_allzones-outside.qualcomm.com [103.229.19.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: cchiluve@smtp.codeaurora.org) by smtp.codeaurora.org (Postfix) with ESMTPSA id 583AF611BE; Mon, 16 Sep 2019 11:41:55 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=codeaurora.org; s=default; t=1568634117; bh=i3TvR9VBOENHp0uYAk8SA6fq9iHDYlbwKazrvJk3C/o=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=bls6HF9PTpsL2mYyHucA7HbDxjuvoDGAstKyULbnrr8Wl9+dKwRQxoWexEobFtqrD 6nhLSG6H4HLNrdPcWy0FgakIEW13LBzHKQ7wBgdwCfngOTGjr4Ap4La15ChLH02yQk y73efkdWHl4ksYvnHmjTTVf4fa9VqddKG8QMqmAI= DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 583AF611BE Authentication-Results: pdx-caf-mail.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: pdx-caf-mail.web.codeaurora.org; spf=none smtp.mailfrom=cchiluve@codeaurora.org From: Chandana Kishori Chiluveru To: balbi@kernel.org, agross@kernel.org, david.brown@linaro.org Cc: linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org, Chandana Kishori Chiluveru Subject: [PATCH V2 2/3] usb: dwc3: qcom: Add interconnect support in dwc3 driver Date: Mon, 16 Sep 2019 17:11:00 +0530 Message-Id: <1568634061-14455-3-git-send-email-cchiluve@codeaurora.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1568634061-14455-1-git-send-email-cchiluve@codeaurora.org> References: <1568634061-14455-1-git-send-email-cchiluve@codeaurora.org> Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Add interconnect support in dwc3-qcom driver to vote for bus bandwidth. This requires for two different paths - from USB master to DDR slave. The other is from APPS master to USB slave. Signed-off-by: Chandana Kishori Chiluveru --- drivers/usb/dwc3/dwc3-qcom.c | 145 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 143 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 184df4d..4f6c9736 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -59,8 +60,13 @@ struct dwc3_qcom { enum usb_dr_mode mode; bool is_suspended; bool pm_suspended; + struct icc_path *usb_ddr_icc_path; + struct icc_path *apps_usb_icc_path; }; +static int usb_interconnect_enable(struct dwc3_qcom *qcom); +static int usb_interconnect_disable(struct dwc3_qcom *qcom); + static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val) { u32 reg; @@ -222,7 +228,7 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) static int dwc3_qcom_suspend(struct dwc3_qcom *qcom) { u32 val; - int i; + int i, ret; if (qcom->is_suspended) return 0; @@ -234,6 +240,11 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom) for (i = qcom->num_clocks - 1; i >= 0; i--) clk_disable_unprepare(qcom->clks[i]); + /* Remove bus voting */ + ret = usb_interconnect_disable(qcom); + if (ret) + dev_err(qcom->dev, "bus bw voting failed %d\n", ret); + qcom->is_suspended = true; dwc3_qcom_enable_interrupts(qcom); @@ -259,6 +270,11 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom) } } + /* Add bus voting */ + ret = usb_interconnect_enable(qcom); + if (ret) + dev_err(qcom->dev, "bus bw voting failed %d\n", ret); + /* Clear existing events from PHY related to L2 in/out */ dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG, PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK); @@ -268,6 +284,117 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom) return 0; } +/* Interconnect path bandwidths in MBps */ +#define USB_MEMORY_AVG_HS_BW MBps_to_icc(240) +#define USB_MEMORY_PEAK_HS_BW MBps_to_icc(700) +#define USB_MEMORY_AVG_SS_BW MBps_to_icc(1000) +#define USB_MEMORY_PEAK_SS_BW MBps_to_icc(2500) +#define APPS_USB_AVG_BW 0 +#define APPS_USB_PEAK_BW MBps_to_icc(40) + +/** + * usb_interconnect_init() - Request to get interconnect path handle + * @qcom: Pointer to the concerned usb core. + * + */ +static int usb_interconnect_init(struct dwc3_qcom *qcom) +{ + struct device *dev = qcom->dev; + + qcom->usb_ddr_icc_path = of_icc_get(dev, "usb-ddr"); + if (IS_ERR(qcom->usb_ddr_icc_path)) { + dev_err(dev, "Error: (%ld) failed getting %s path\n", + PTR_ERR(qcom->usb_ddr_icc_path), "usb-ddr"); + return PTR_ERR(qcom->usb_ddr_icc_path); + } + + qcom->apps_usb_icc_path = of_icc_get(dev, "apps-usb"); + if (IS_ERR(qcom->apps_usb_icc_path)) { + dev_err(dev, "Error: (%ld) failed getting %s path\n", + PTR_ERR(qcom->apps_usb_icc_path), "apps-usb"); + return PTR_ERR(qcom->usb_ddr_icc_path); + } + + return 0; +} + +/** + * geni_interconnect_exit() - Request to release interconnect path handle + * @qcom: Pointer to the concerned usb core. + * + * This function is used to release interconnect path handle. + */ +static void usb_interconnect_exit(struct dwc3_qcom *qcom) +{ + icc_put(qcom->usb_ddr_icc_path); + icc_put(qcom->apps_usb_icc_path); +} + +/* Currently we only use bandwidth level, so just "enable" interconnects */ +static int usb_interconnect_enable(struct dwc3_qcom *qcom) +{ + struct dwc3 *dwc; + int ret; + + dwc = platform_get_drvdata(qcom->dwc3); + if (!dwc) { + dev_err(qcom->dev, "Failed to get dwc3 device\n"); + return -EPROBE_DEFER; + } + + if (dwc->maximum_speed == USB_SPEED_SUPER) { + ret = icc_set_bw(qcom->usb_ddr_icc_path, + USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW); + if (ret) + return ret; + } else { + ret = icc_set_bw(qcom->usb_ddr_icc_path, + USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW); + if (ret) + return ret; + } + + ret = icc_set_bw(qcom->apps_usb_icc_path, + APPS_USB_AVG_BW, APPS_USB_PEAK_BW); + if (ret) + goto err_disable_mem_path; + + return 0; + +err_disable_mem_path: + icc_set_bw(qcom->usb_ddr_icc_path, 0, 0); + + return ret; +} + +/* To disable an interconnect, we just set its bandwidth to 0 */ +static int usb_interconnect_disable(struct dwc3_qcom *qcom) +{ + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); + int ret; + + ret = icc_set_bw(qcom->usb_ddr_icc_path, 0, 0); + if (ret) + return ret; + + ret = icc_set_bw(qcom->apps_usb_icc_path, 0, 0); + if (ret) + goto err_reenable_memory_path; + + return 0; + + /* Re-enable things in the event of an error */ +err_reenable_memory_path: + if (dwc->maximum_speed == USB_SPEED_SUPER) + icc_set_bw(qcom->usb_ddr_icc_path, + USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW); + else + icc_set_bw(qcom->usb_ddr_icc_path, + USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW); + + return ret; +} + static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data) { struct dwc3_qcom *qcom = data; @@ -494,6 +621,17 @@ static int dwc3_qcom_probe(struct platform_device *pdev) goto depopulate; } + ret = usb_interconnect_init(qcom); + if (ret) { + dev_err(dev, "failed to get interconnect handle ret:%d\n", ret); + goto depopulate; + } + ret = usb_interconnect_enable(qcom); + if (ret) { + dev_err(qcom->dev, "bus bw voting failed %d\n", ret); + goto interconnect_exit; + } + qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev); /* enable vbus override for device mode */ @@ -503,7 +641,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev) /* register extcon to override sw_vbus on Vbus change later */ ret = dwc3_qcom_register_extcon(qcom); if (ret) - goto depopulate; + goto interconnect_exit; device_init_wakeup(&pdev->dev, 1); qcom->is_suspended = false; @@ -513,6 +651,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev) return 0; +interconnect_exit: + usb_interconnect_exit(qcom); depopulate: of_platform_depopulate(&pdev->dev); clk_disable: @@ -540,6 +680,7 @@ static int dwc3_qcom_remove(struct platform_device *pdev) } qcom->num_clocks = 0; + usb_interconnect_exit(qcom); reset_control_assert(qcom->resets); pm_runtime_allow(dev);