deleted file mode 100644
@@ -1,58 +0,0 @@
-Renesas Electronics USBHS driver
-
-Required properties:
- - compatible: Must contain one or more of the following:
-
- - "renesas,usbhs-r8a7743" for r8a7743 (RZ/G1M) compatible device
- - "renesas,usbhs-r8a7744" for r8a7744 (RZ/G1N) compatible device
- - "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device
- - "renesas,usbhs-r8a77470" for r8a77470 (RZ/G1C) compatible device
- - "renesas,usbhs-r8a774a1" for r8a774a1 (RZ/G2M) compatible device
- - "renesas,usbhs-r8a774b1" for r8a774b1 (RZ/G2N) compatible device
- - "renesas,usbhs-r8a774c0" for r8a774c0 (RZ/G2E) compatible device
- - "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device
- - "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device
- - "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device
- - "renesas,usbhs-r8a7793" for r8a7793 (R-Car M2-N) compatible device
- - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device
- - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
- - "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device
- - "renesas,usbhs-r8a77965" for r8a77965 (R-Car M3-N) compatible device
- - "renesas,usbhs-r8a77990" for r8a77990 (R-Car E3) compatible device
- - "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device
- - "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device
- - "renesas,usbhs-r7s9210" for r7s9210 (RZ/A2) compatible device
- - "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices
- - "renesas,rcar-gen3-usbhs" for R-Car Gen3 or RZ/G2 compatible devices
- - "renesas,rza1-usbhs" for RZ/A1 compatible device
- - "renesas,rza2-usbhs" for RZ/A2 compatible device
-
- When compatible with the generic version, nodes must list the
- SoC-specific version corresponding to the platform first followed
- by the generic version.
-
- - reg: Base address and length of the register for the USBHS
- - interrupts: Interrupt specifier for the USBHS
- - clocks: A list of phandle + clock specifier pairs.
- - In case of "renesas,rcar-gen3-usbhs", two clocks are required.
- First clock should be peripheral and second one should be host.
- - In case of except above, one clock is required. First clock
- should be peripheral.
-
-Optional properties:
- - renesas,buswait: Integer to use BUSWAIT register
- - renesas,enable-gpio: A gpio specifier to check GPIO determining if USB
- function should be enabled
- - phys: phandle + phy specifier pair
- - phy-names: must be "usb"
- - dmas: Must contain a list of references to DMA specifiers.
- - dma-names : named "ch%d", where %d is the channel number ranging from zero
- to the number of channels (DnFIFOs) minus one.
-
-Example:
- usbhs: usb@e6590000 {
- compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
- reg = <0 0xe6590000 0 0x100>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
- };
new file mode 100644
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/renesas,usbhs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas USBHS (HS-USB) controller
+
+maintainers:
+ - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: renesas,usbhs-r7s72100 # RZ/A1
+ - const: renesas,rza1-usbhs
+
+ - items:
+ - const: renesas,usbhs-r7s9210 # RZ/A2
+ - const: renesas,rza2-usbhs
+
+ - items:
+ - enum:
+ - renesas,usbhs-r8a7743 # RZ/G1M
+ - renesas,usbhs-r8a7744 # RZ/G1N
+ - renesas,usbhs-r8a7745 # RZ/G1E
+ - renesas,usbhs-r8a77470 # RZ/G1C
+ - renesas,usbhs-r8a7790 # R-Car H2
+ - renesas,usbhs-r8a7791 # R-Car M2-W
+ - renesas,usbhs-r8a7792 # R-Car V2H
+ - renesas,usbhs-r8a7793 # R-Car M2-N
+ - renesas,usbhs-r8a7794 # R-Car E2
+ - const: renesas,rcar-gen2-usbhs
+
+ - items:
+ - enum:
+ - renesas,usbhs-r8a774a1 # RZ/G2M
+ - renesas,usbhs-r8a774b1 # RZ/G2N
+ - renesas,usbhs-r8a774c0 # RZ/G2E
+ - renesas,usbhs-r8a7795 # R-Car H3
+ - renesas,usbhs-r8a7796 # R-Car M3-W
+ - renesas,usbhs-r8a77965 # R-Car M3-N
+ - renesas,usbhs-r8a77990 # R-Car E3
+ - renesas,usbhs-r8a77995 # R-Car D3
+ - const: renesas,rcar-gen3-usbhs
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+ items:
+ - description: USB 2.0 host
+ - description: USB 2.0 peripheral
+ - description: USB 2.0 clock selector
+
+ interrupts:
+ maxItems: 1
+
+ renesas,buswait:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Integer to use BUSWAIT register.
+
+ renesas,enable-gpio:
+ description: |
+ gpio specifier to check GPIO determining if USB function should be
+ enabled.
+
+ phys:
+ maxItems: 1
+ items:
+ - description: phandle + phy specifier pair.
+
+ phy-names:
+ maxItems: 1
+ items:
+ - const: usb
+
+ dmas:
+ minItems: 2
+ maxItems: 4
+
+ dma-names:
+ minItems: 2
+ maxItems: 4
+ items:
+ - const: ch0
+ - const: ch1
+ - const: ch2
+ - const: ch3
+
+ dr_mode: true
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: USB 2.0 host
+ - description: USB 2.0 peripheral
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7790-sysc.h>
+
+ usbhs: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>;
+ };
Convert Renesas USBHS (HS-USB) controller bindings documentation to json-schema. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- Changes from v2: - Fix dma-names and dr_mode. https://patchwork.kernel.org/patch/11229977/ Changes from v1: - Remove enum from RZ/A[12] compatibles. - Remove comments from reg and clocks. - Change maxItems from 2 to 3 on clocks for USB 2.0 clock selector. - Add items on clocks. - Remove $ref from a gpio property. - Add maxItems on phys, phy-names and resets. - Remove generic.txt file reference. - Remove the last blank line. https://patchwork.kernel.org/patch/11205919/ .../devicetree/bindings/usb/renesas,usbhs.txt | 58 ---------- .../devicetree/bindings/usb/renesas,usbhs.yaml | 126 +++++++++++++++++++++ 2 files changed, 126 insertions(+), 58 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/renesas,usbhs.txt create mode 100644 Documentation/devicetree/bindings/usb/renesas,usbhs.yaml