diff mbox series

[V4,01/19] dt-bindings: phy: tegra-xusb: Add usb-role-switch

Message ID 1580815025-10915-2-git-send-email-nkristam@nvidia.com (mailing list archive)
State Superseded
Headers show
Series Tegra XUSB OTG support | expand

Commit Message

Nagarjuna Kristam Feb. 4, 2020, 11:16 a.m. UTC 
Add usb-role-switch property for Tegra210 and Tegra186 platforms. This
entry is used by XUSB pad controller driver to register for role changes
for OTG/Peripheral capable USB 2 ports.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
---
V3-V4:
 - Added Acked-by updates to commit message.
---
V2:
 - Moved usb-role-switch to seperate Required section as suggested by Thierry.
 - Added reference to usb/usb-conn-gpio.txt for connector subnode.
---
 .../devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt         | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
index 9fb682e..23bf354 100644
--- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
@@ -174,6 +174,12 @@  Required properties:
   - "device": for USB device mode
   - "otg": for USB OTG mode
 
+Required properties for OTG/Peripheral capable USB2 ports:
+- usb-role-switch: Boolean property to indicate that the port support OTG or
+  peripheral mode. If present, the port supports switching between USB host
+  and peripheral roles. Connector should be added as subnode.
+  See usb/usb-conn-gpio.txt.
+
 Optional properties:
 - nvidia,internal: A boolean property whose presence determines that a port
   is internal. In the absence of this property the port is considered to be