diff mbox series

[V2,5/8] phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection

Message ID 1586939108-10075-6-git-send-email-nkristam@nvidia.com (mailing list archive)
State Superseded
Headers show
Series Tegra XUSB charger detect support | expand

Commit Message

Nagarjuna Kristam April 15, 2020, 8:25 a.m. UTC 
When USB charger is enabled, UTMI PAD needs to be protected according
to the direction and current level. Add support for the same on Tegra210
and Tegra186.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
---
V2:
 - Commit message coorected.
 - Patch re-based.
---
 drivers/phy/tegra/xusb-tegra186.c | 40 +++++++++++++++++++++++++++++++++++++++
 drivers/phy/tegra/xusb-tegra210.c | 31 ++++++++++++++++++++++++++++++
 drivers/phy/tegra/xusb.h          | 13 +++++++++++++
 3 files changed, 84 insertions(+)

Comments

Thierry Reding April 28, 2020, 10:15 a.m. UTC | #1 
On Wed, Apr 15, 2020 at 01:55:05PM +0530, Nagarjuna Kristam wrote:
> When USB charger is enabled, UTMI PAD needs to be protected according
> to the direction and current level. Add support for the same on Tegra210
> and Tegra186.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> ---
> V2:
>  - Commit message coorected.
>  - Patch re-based.
> ---
>  drivers/phy/tegra/xusb-tegra186.c | 40 +++++++++++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb-tegra210.c | 31 ++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb.h          | 13 +++++++++++++
>  3 files changed, 84 insertions(+)

Oh wait... you're not actually adding custom public APIs for this but
are simply wiring this through the SoC-specific code. Okay, that seems
fine to me.

Ignore my comments on the prior two patches.

> diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
> index f862254..03bdb5b 100644
> --- a/drivers/phy/tegra/xusb-tegra186.c
> +++ b/drivers/phy/tegra/xusb-tegra186.c
> @@ -68,6 +68,13 @@
>  #define   PORTX_SPEED_SUPPORT_MASK		(0x3)
>  #define     PORT_SPEED_SUPPORT_GEN1		(0x0)
>  
> +#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x)       (0x84 + (x) * 0x40)
> +#define  PD_VREG                                (1 << 6)
> +#define  VREG_LEV(x)                            (((x) & 0x3) << 7)
> +#define  VREG_DIR(x)                            (((x) & 0x3) << 11)
> +#define  VREG_DIR_IN                            VREG_DIR(1)
> +#define  VREG_DIR_OUT                           VREG_DIR(2)
> +
>  #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x)	(0x88 + (x) * 0x40)
>  #define  HS_CURR_LEVEL(x)			((x) & 0x3f)
>  #define  TERM_SEL				BIT(25)
> @@ -289,6 +296,37 @@ static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
>  	usb2->powered_on = false;
>  }
>  
> +static void tegra186_xusb_padctl_utmi_pad_set_protection_level(
> +				struct tegra_xusb_port *port, int level,
> +				enum tegra_vbus_dir dir)

It's more idiomatic to wrap after the return type and while at it,
perhaps make this name a little shorter, like so:

    static void
    tegra186_xusb_padctl_utmi_pad_set_protection(struct tegra_xusb_port *port,
						 int level,
						 enum tegra_vbus_dir dir)

> +{
> +	u32 value;
> +	struct tegra_xusb_padctl *padctl = port->padctl;
> +	unsigned int index = port->index;
> +
> +	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +
> +	if (level < 0) {
> +		/* disable pad protection */
> +		value |= PD_VREG;
> +		value &= ~VREG_LEV(~0);
> +		value &= ~VREG_DIR(~0);
> +	} else {
> +		if (dir == TEGRA_VBUS_SOURCE)
> +			value |= VREG_DIR_OUT;
> +		else if (dir == TEGRA_VBUS_SINK)
> +			value |= VREG_DIR_IN;
> +
> +		value &= ~PD_VREG;
> +		value &= ~VREG_DIR(~0);
> +		value &= ~VREG_LEV(~0);
> +		value |= VREG_LEV(level);
> +	}
> +
> +	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +}
> +
> +

There's an extra blank line above that can be dropped.

>  static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
>  					       bool status)
>  {
> @@ -935,6 +973,8 @@ static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
>  	.vbus_override = tegra186_xusb_padctl_vbus_override,
>  	.utmi_pad_power_on = tegra_phy_xusb_utmi_pad_power_on,
>  	.utmi_pad_power_down = tegra_phy_xusb_utmi_pad_power_down,
> +	.utmi_pad_set_protection_level =
> +			tegra186_xusb_padctl_utmi_pad_set_protection_level,
>  };
>  
>  #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC)
> diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
> index caf0890..7d84f1a 100644
> --- a/drivers/phy/tegra/xusb-tegra210.c
> +++ b/drivers/phy/tegra/xusb-tegra210.c
> @@ -74,6 +74,8 @@
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL 0x1
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
> +#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(x) (((x) & 0x3) << 7)
> +#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(x) (((x) & 0x3) << 11)
>  
>  #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
>  #define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD_ZI (1 << 29)
> @@ -1116,6 +1118,33 @@ void tegra210_usb2_pad_power_down(struct phy *phy)
>  	usb2->powered_on = false;
>  }
>  
> +static void tegra210_xusb_padctl_utmi_pad_set_protection_level(
> +				struct tegra_xusb_port *port, int level,
> +				enum tegra_vbus_dir dir)

Same comment as above.

> +{
> +	u32 value;
> +	struct tegra_xusb_padctl *padctl = port->padctl;
> +	unsigned int index = port->index;
> +
> +	value = padctl_readl(padctl,
> +			     XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +
> +	if (level < 0) {
> +		/* disable pad protection */
> +		value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
> +		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
> +		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
> +	} else {
> +		value &= ~XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
> +		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
> +		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
> +		value |= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(level);
> +	}
> +
> +	padctl_writel(padctl, value,
> +		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +}
> +
>  static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
>  				      int submode)
>  {
> @@ -2291,6 +2320,8 @@ static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
>  	.utmi_port_reset = tegra210_utmi_port_reset,
>  	.utmi_pad_power_on = tegra210_usb2_pad_power_on,
>  	.utmi_pad_power_down = tegra210_usb2_pad_power_down,
> +	.utmi_pad_set_protection_level =
> +			tegra210_xusb_padctl_utmi_pad_set_protection_level,
>  };
>  
>  static const char * const tegra210_xusb_padctl_supply_names[] = {
> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
> index 6995fc4..79e96b0 100644
> --- a/drivers/phy/tegra/xusb.h
> +++ b/drivers/phy/tegra/xusb.h
> @@ -259,6 +259,17 @@ to_sata_pad(struct tegra_xusb_pad *pad)
>   */
>  struct tegra_xusb_port_ops;
>  
> +/*
> + * Tegra OTG port VBUS direction:
> + * default (based on port capability) or
> + * as source or sink
> + */
> +enum tegra_vbus_dir {
> +	TEGRA_VBUS_DEFAULT,
> +	TEGRA_VBUS_SOURCE,
> +	TEGRA_VBUS_SINK
> +};

Can't we key off of something like the OTG mode? I thought we already
carried that elsewhere.

> +
>  struct tegra_xusb_port {
>  	struct tegra_xusb_padctl *padctl;
>  	struct tegra_xusb_lane *lane;
> @@ -398,6 +409,8 @@ struct tegra_xusb_padctl_ops {
>  	int (*utmi_port_reset)(struct phy *phy);
>  	void (*utmi_pad_power_on)(struct phy *phy);
>  	void (*utmi_pad_power_down)(struct phy *phy);
> +	void (*utmi_pad_set_protection_level)(struct tegra_xusb_port *port,
> +					int max_ua, enum tegra_vbus_dir dir);

You call the variable "max_ua" here but it's "level" in the
implementations, which is slightly confusing. Please choose one and
stick with it. Also, if it's a value in microamperes, perhaps just make
it unsigned int?

Thierry
Nagarjuna Kristam May 4, 2020, 10:26 a.m. UTC | #2 
On 28-04-2020 15:45, Thierry Reding wrote:
> On Wed, Apr 15, 2020 at 01:55:05PM +0530, Nagarjuna Kristam wrote:
>> When USB charger is enabled, UTMI PAD needs to be protected according
>> to the direction and current level. Add support for the same on Tegra210
>> and Tegra186.
>>
>> Signed-off-by: Nagarjuna Kristam<nkristam@nvidia.com>
>> ---
>> V2:
>>   - Commit message coorected.
>>   - Patch re-based.
>> ---
>>   drivers/phy/tegra/xusb-tegra186.c | 40 +++++++++++++++++++++++++++++++++++++++
>>   drivers/phy/tegra/xusb-tegra210.c | 31 ++++++++++++++++++++++++++++++
>>   drivers/phy/tegra/xusb.h          | 13 +++++++++++++
>>   3 files changed, 84 insertions(+)
> Oh wait... you're not actually adding custom public APIs for this but
> are simply wiring this through the SoC-specific code. Okay, that seems
> fine to me.
> 
> Ignore my comments on the prior two patches.
> 
>> diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
>> index f862254..03bdb5b 100644
>> --- a/drivers/phy/tegra/xusb-tegra186.c
>> +++ b/drivers/phy/tegra/xusb-tegra186.c
>> @@ -68,6 +68,13 @@
>>   #define   PORTX_SPEED_SUPPORT_MASK		(0x3)
>>   #define     PORT_SPEED_SUPPORT_GEN1		(0x0)
>>   
>> +#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x)       (0x84 + (x) * 0x40)
>> +#define  PD_VREG                                (1 << 6)
>> +#define  VREG_LEV(x)                            (((x) & 0x3) << 7)
>> +#define  VREG_DIR(x)                            (((x) & 0x3) << 11)
>> +#define  VREG_DIR_IN                            VREG_DIR(1)
>> +#define  VREG_DIR_OUT                           VREG_DIR(2)
>> +
>>   #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x)	(0x88 + (x) * 0x40)
>>   #define  HS_CURR_LEVEL(x)			((x) & 0x3f)
>>   #define  TERM_SEL				BIT(25)
>> @@ -289,6 +296,37 @@ static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
>>   	usb2->powered_on = false;
>>   }
>>   
>> +static void tegra186_xusb_padctl_utmi_pad_set_protection_level(
>> +				struct tegra_xusb_port *port, int level,
>> +				enum tegra_vbus_dir dir)
> It's more idiomatic to wrap after the return type and while at it,
> perhaps make this name a little shorter, like so:
> 
>      static void
>      tegra186_xusb_padctl_utmi_pad_set_protection(struct tegra_xusb_port *port,
> 						 int level,
> 						 enum tegra_vbus_dir dir)
> 
Will update accordingly.
>> +{
>> +	u32 value;
>> +	struct tegra_xusb_padctl *padctl = port->padctl;
>> +	unsigned int index = port->index;
>> +
>> +	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
>> +
>> +	if (level < 0) {
>> +		/* disable pad protection */
>> +		value |= PD_VREG;
>> +		value &= ~VREG_LEV(~0);
>> +		value &= ~VREG_DIR(~0);
>> +	} else {
>> +		if (dir == TEGRA_VBUS_SOURCE)
>> +			value |= VREG_DIR_OUT;
>> +		else if (dir == TEGRA_VBUS_SINK)
>> +			value |= VREG_DIR_IN;
>> +
>> +		value &= ~PD_VREG;
>> +		value &= ~VREG_DIR(~0);
>> +		value &= ~VREG_LEV(~0);
>> +		value |= VREG_LEV(level);
>> +	}
>> +
>> +	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
>> +}
>> +
>> +
> There's an extra blank line above that can be dropped.
> 
Will remove the same.
>>   static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
>>   					       bool status)
>>   {
>> @@ -935,6 +973,8 @@ static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
>>   	.vbus_override = tegra186_xusb_padctl_vbus_override,
>>   	.utmi_pad_power_on = tegra_phy_xusb_utmi_pad_power_on,
>>   	.utmi_pad_power_down = tegra_phy_xusb_utmi_pad_power_down,
>> +	.utmi_pad_set_protection_level =
>> +			tegra186_xusb_padctl_utmi_pad_set_protection_level,
>>   };
>>   
>>   #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC)
>> diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
>> index caf0890..7d84f1a 100644
>> --- a/drivers/phy/tegra/xusb-tegra210.c
>> +++ b/drivers/phy/tegra/xusb-tegra210.c
>> @@ -74,6 +74,8 @@
>>   #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
>>   #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL 0x1
>>   #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
>> +#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(x) (((x) & 0x3) << 7)
>> +#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(x) (((x) & 0x3) << 11)
>>   
>>   #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
>>   #define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD_ZI (1 << 29)
>> @@ -1116,6 +1118,33 @@ void tegra210_usb2_pad_power_down(struct phy *phy)
>>   	usb2->powered_on = false;
>>   }
>>   
>> +static void tegra210_xusb_padctl_utmi_pad_set_protection_level(
>> +				struct tegra_xusb_port *port, int level,
>> +				enum tegra_vbus_dir dir)
> Same comment as above.
> 
will update accordingly.
>> +{
>> +	u32 value;
>> +	struct tegra_xusb_padctl *padctl = port->padctl;
>> +	unsigned int index = port->index;
>> +
>> +	value = padctl_readl(padctl,
>> +			     XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
>> +
>> +	if (level < 0) {
>> +		/* disable pad protection */
>> +		value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
>> +		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
>> +		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
>> +	} else {
>> +		value &= ~XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
>> +		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
>> +		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
>> +		value |= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(level);
>> +	}
>> +
>> +	padctl_writel(padctl, value,
>> +		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
>> +}
>> +
>>   static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
>>   				      int submode)
>>   {
>> @@ -2291,6 +2320,8 @@ static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
>>   	.utmi_port_reset = tegra210_utmi_port_reset,
>>   	.utmi_pad_power_on = tegra210_usb2_pad_power_on,
>>   	.utmi_pad_power_down = tegra210_usb2_pad_power_down,
>> +	.utmi_pad_set_protection_level =
>> +			tegra210_xusb_padctl_utmi_pad_set_protection_level,
>>   };
>>   
>>   static const char * const tegra210_xusb_padctl_supply_names[] = {
>> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
>> index 6995fc4..79e96b0 100644
>> --- a/drivers/phy/tegra/xusb.h
>> +++ b/drivers/phy/tegra/xusb.h
>> @@ -259,6 +259,17 @@ to_sata_pad(struct tegra_xusb_pad *pad)
>>    */
>>   struct tegra_xusb_port_ops;
>>   
>> +/*
>> + * Tegra OTG port VBUS direction:
>> + * default (based on port capability) or
>> + * as source or sink
>> + */
>> +enum tegra_vbus_dir {
>> +	TEGRA_VBUS_DEFAULT,
>> +	TEGRA_VBUS_SOURCE,
>> +	TEGRA_VBUS_SINK
>> +};
> Can't we key off of something like the OTG mode? I thought we already
> carried that elsewhere.
> 
Unlike OTG mode, this is VBUS direction, which is different and not same 
as mode. Hence its a seperate structure.
>> +
>>   struct tegra_xusb_port {
>>   	struct tegra_xusb_padctl *padctl;
>>   	struct tegra_xusb_lane *lane;
>> @@ -398,6 +409,8 @@ struct tegra_xusb_padctl_ops {
>>   	int (*utmi_port_reset)(struct phy *phy);
>>   	void (*utmi_pad_power_on)(struct phy *phy);
>>   	void (*utmi_pad_power_down)(struct phy *phy);
>> +	void (*utmi_pad_set_protection_level)(struct tegra_xusb_port *port,
>> +					int max_ua, enum tegra_vbus_dir dir);
> You call the variable "max_ua" here but it's "level" in the
> implementations, which is slightly confusing. Please choose one and
> stick with it. Also, if it's a value in microamperes, perhaps just make
> it unsigned int?
> 
Its level actually, and needed as int, as it can carry negative value. 
Will syncronize the naming across all places.

> Thierry
diff mbox series

Patch

diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index f862254..03bdb5b 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -68,6 +68,13 @@ 
 #define   PORTX_SPEED_SUPPORT_MASK		(0x3)
 #define     PORT_SPEED_SUPPORT_GEN1		(0x0)
 
+#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x)       (0x84 + (x) * 0x40)
+#define  PD_VREG                                (1 << 6)
+#define  VREG_LEV(x)                            (((x) & 0x3) << 7)
+#define  VREG_DIR(x)                            (((x) & 0x3) << 11)
+#define  VREG_DIR_IN                            VREG_DIR(1)
+#define  VREG_DIR_OUT                           VREG_DIR(2)
+
 #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x)	(0x88 + (x) * 0x40)
 #define  HS_CURR_LEVEL(x)			((x) & 0x3f)
 #define  TERM_SEL				BIT(25)
@@ -289,6 +296,37 @@  static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
 	usb2->powered_on = false;
 }
 
+static void tegra186_xusb_padctl_utmi_pad_set_protection_level(
+				struct tegra_xusb_port *port, int level,
+				enum tegra_vbus_dir dir)
+{
+	u32 value;
+	struct tegra_xusb_padctl *padctl = port->padctl;
+	unsigned int index = port->index;
+
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	if (level < 0) {
+		/* disable pad protection */
+		value |= PD_VREG;
+		value &= ~VREG_LEV(~0);
+		value &= ~VREG_DIR(~0);
+	} else {
+		if (dir == TEGRA_VBUS_SOURCE)
+			value |= VREG_DIR_OUT;
+		else if (dir == TEGRA_VBUS_SINK)
+			value |= VREG_DIR_IN;
+
+		value &= ~PD_VREG;
+		value &= ~VREG_DIR(~0);
+		value &= ~VREG_LEV(~0);
+		value |= VREG_LEV(level);
+	}
+
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+}
+
+
 static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
 					       bool status)
 {
@@ -935,6 +973,8 @@  static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
 	.vbus_override = tegra186_xusb_padctl_vbus_override,
 	.utmi_pad_power_on = tegra_phy_xusb_utmi_pad_power_on,
 	.utmi_pad_power_down = tegra_phy_xusb_utmi_pad_power_down,
+	.utmi_pad_set_protection_level =
+			tegra186_xusb_padctl_utmi_pad_set_protection_level,
 };
 
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC)
diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index caf0890..7d84f1a 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -74,6 +74,8 @@ 
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL 0x1
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
+#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(x) (((x) & 0x3) << 7)
+#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(x) (((x) & 0x3) << 11)
 
 #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
 #define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD_ZI (1 << 29)
@@ -1116,6 +1118,33 @@  void tegra210_usb2_pad_power_down(struct phy *phy)
 	usb2->powered_on = false;
 }
 
+static void tegra210_xusb_padctl_utmi_pad_set_protection_level(
+				struct tegra_xusb_port *port, int level,
+				enum tegra_vbus_dir dir)
+{
+	u32 value;
+	struct tegra_xusb_padctl *padctl = port->padctl;
+	unsigned int index = port->index;
+
+	value = padctl_readl(padctl,
+			     XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	if (level < 0) {
+		/* disable pad protection */
+		value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
+		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
+		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
+	} else {
+		value &= ~XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
+		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
+		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
+		value |= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(level);
+	}
+
+	padctl_writel(padctl, value,
+		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+}
+
 static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
 				      int submode)
 {
@@ -2291,6 +2320,8 @@  static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
 	.utmi_port_reset = tegra210_utmi_port_reset,
 	.utmi_pad_power_on = tegra210_usb2_pad_power_on,
 	.utmi_pad_power_down = tegra210_usb2_pad_power_down,
+	.utmi_pad_set_protection_level =
+			tegra210_xusb_padctl_utmi_pad_set_protection_level,
 };
 
 static const char * const tegra210_xusb_padctl_supply_names[] = {
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 6995fc4..79e96b0 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -259,6 +259,17 @@  to_sata_pad(struct tegra_xusb_pad *pad)
  */
 struct tegra_xusb_port_ops;
 
+/*
+ * Tegra OTG port VBUS direction:
+ * default (based on port capability) or
+ * as source or sink
+ */
+enum tegra_vbus_dir {
+	TEGRA_VBUS_DEFAULT,
+	TEGRA_VBUS_SOURCE,
+	TEGRA_VBUS_SINK
+};
+
 struct tegra_xusb_port {
 	struct tegra_xusb_padctl *padctl;
 	struct tegra_xusb_lane *lane;
@@ -398,6 +409,8 @@  struct tegra_xusb_padctl_ops {
 	int (*utmi_port_reset)(struct phy *phy);
 	void (*utmi_pad_power_on)(struct phy *phy);
 	void (*utmi_pad_power_down)(struct phy *phy);
+	void (*utmi_pad_set_protection_level)(struct tegra_xusb_port *port,
+					int max_ua, enum tegra_vbus_dir dir);
 };
 
 struct tegra_xusb_padctl_soc {