diff mbox series

[V3,5/8] phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection

Message ID 1589437363-16727-6-git-send-email-nkristam@nvidia.com (mailing list archive)
State New, archived
Headers show
Series Tegra XUSB charger detect support | expand

Commit Message

Nagarjuna Kristam May 14, 2020, 6:22 a.m. UTC 
When USB charger is enabled, UTMI PAD needs to be protected according
to the direction and current level. Add support for the same on Tegra210
and Tegra186.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
---
V3:
 - Alligned function and its arguments.
 - Fixed other comments from Thierry.
---
V2:
 - Commit message coorected.
 - Patch re-based.
---
 drivers/phy/tegra/xusb-tegra186.c | 40 +++++++++++++++++++++++++++++++++++++++
 drivers/phy/tegra/xusb-tegra210.c | 32 +++++++++++++++++++++++++++++++
 drivers/phy/tegra/xusb.h          | 13 +++++++++++++
 3 files changed, 85 insertions(+)

Comments

Kishon Vijay Abraham I May 18, 2020, 12:24 p.m. UTC | #1 
Thierry,

On 5/14/2020 11:52 AM, Nagarjuna Kristam wrote:
> When USB charger is enabled, UTMI PAD needs to be protected according
> to the direction and current level. Add support for the same on Tegra210
> and Tegra186.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>

Can you give your Acked by for pending patches in this series?

Thanks
Kishon
> ---
> V3:
>  - Alligned function and its arguments.
>  - Fixed other comments from Thierry.
> ---
> V2:
>  - Commit message coorected.
>  - Patch re-based.
> ---
>  drivers/phy/tegra/xusb-tegra186.c | 40 +++++++++++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb-tegra210.c | 32 +++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb.h          | 13 +++++++++++++
>  3 files changed, 85 insertions(+)
> 
> diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
> index f862254..59b78a7 100644
> --- a/drivers/phy/tegra/xusb-tegra186.c
> +++ b/drivers/phy/tegra/xusb-tegra186.c
> @@ -68,6 +68,13 @@
>  #define   PORTX_SPEED_SUPPORT_MASK		(0x3)
>  #define     PORT_SPEED_SUPPORT_GEN1		(0x0)
>  
> +#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x)       (0x84 + (x) * 0x40)
> +#define  PD_VREG                                (1 << 6)
> +#define  VREG_LEV(x)                            (((x) & 0x3) << 7)
> +#define  VREG_DIR(x)                            (((x) & 0x3) << 11)
> +#define  VREG_DIR_IN                            VREG_DIR(1)
> +#define  VREG_DIR_OUT                           VREG_DIR(2)
> +
>  #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x)	(0x88 + (x) * 0x40)
>  #define  HS_CURR_LEVEL(x)			((x) & 0x3f)
>  #define  TERM_SEL				BIT(25)
> @@ -289,6 +296,37 @@ static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
>  	usb2->powered_on = false;
>  }
>  
> +static void
> +tegra186_xusb_padctl_utmi_pad_set_protection(struct tegra_xusb_port *port,
> +					     int level,
> +					     enum tegra_vbus_dir dir)
> +{
> +	u32 value;
> +	struct tegra_xusb_padctl *padctl = port->padctl;
> +	unsigned int index = port->index;
> +
> +	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +
> +	if (level < 0) {
> +		/* disable pad protection */
> +		value |= PD_VREG;
> +		value &= ~VREG_LEV(~0);
> +		value &= ~VREG_DIR(~0);
> +	} else {
> +		if (dir == TEGRA_VBUS_SOURCE)
> +			value |= VREG_DIR_OUT;
> +		else if (dir == TEGRA_VBUS_SINK)
> +			value |= VREG_DIR_IN;
> +
> +		value &= ~PD_VREG;
> +		value &= ~VREG_DIR(~0);
> +		value &= ~VREG_LEV(~0);
> +		value |= VREG_LEV(level);
> +	}
> +
> +	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +}
> +
>  static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
>  					       bool status)
>  {
> @@ -935,6 +973,8 @@ static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
>  	.vbus_override = tegra186_xusb_padctl_vbus_override,
>  	.utmi_pad_power_on = tegra_phy_xusb_utmi_pad_power_on,
>  	.utmi_pad_power_down = tegra_phy_xusb_utmi_pad_power_down,
> +	.utmi_pad_set_protection =
> +			tegra186_xusb_padctl_utmi_pad_set_protection,
>  };
>  
>  #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC)
> diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
> index caf0890..80c4349 100644
> --- a/drivers/phy/tegra/xusb-tegra210.c
> +++ b/drivers/phy/tegra/xusb-tegra210.c
> @@ -74,6 +74,8 @@
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL 0x1
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
> +#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(x) (((x) & 0x3) << 7)
> +#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(x) (((x) & 0x3) << 11)
>  
>  #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
>  #define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD_ZI (1 << 29)
> @@ -1116,6 +1118,34 @@ void tegra210_usb2_pad_power_down(struct phy *phy)
>  	usb2->powered_on = false;
>  }
>  
> +static void
> +tegra210_xusb_padctl_utmi_pad_set_protection(struct tegra_xusb_port *port,
> +					     int level,
> +					     enum tegra_vbus_dir dir)
> +{
> +	u32 value;
> +	struct tegra_xusb_padctl *padctl = port->padctl;
> +	unsigned int index = port->index;
> +
> +	value = padctl_readl(padctl,
> +			     XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +
> +	if (level < 0) {
> +		/* disable pad protection */
> +		value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
> +		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
> +		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
> +	} else {
> +		value &= ~XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
> +		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
> +		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
> +		value |= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(level);
> +	}
> +
> +	padctl_writel(padctl, value,
> +		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +}
> +
>  static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
>  				      int submode)
>  {
> @@ -2291,6 +2321,8 @@ static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
>  	.utmi_port_reset = tegra210_utmi_port_reset,
>  	.utmi_pad_power_on = tegra210_usb2_pad_power_on,
>  	.utmi_pad_power_down = tegra210_usb2_pad_power_down,
> +	.utmi_pad_set_protection =
> +			tegra210_xusb_padctl_utmi_pad_set_protection,
>  };
>  
>  static const char * const tegra210_xusb_padctl_supply_names[] = {
> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
> index 6995fc4..475bcc6 100644
> --- a/drivers/phy/tegra/xusb.h
> +++ b/drivers/phy/tegra/xusb.h
> @@ -259,6 +259,17 @@ to_sata_pad(struct tegra_xusb_pad *pad)
>   */
>  struct tegra_xusb_port_ops;
>  
> +/*
> + * Tegra OTG port VBUS direction:
> + * default (based on port capability) or
> + * as source or sink
> + */
> +enum tegra_vbus_dir {
> +	TEGRA_VBUS_DEFAULT,
> +	TEGRA_VBUS_SOURCE,
> +	TEGRA_VBUS_SINK
> +};
> +
>  struct tegra_xusb_port {
>  	struct tegra_xusb_padctl *padctl;
>  	struct tegra_xusb_lane *lane;
> @@ -398,6 +409,8 @@ struct tegra_xusb_padctl_ops {
>  	int (*utmi_port_reset)(struct phy *phy);
>  	void (*utmi_pad_power_on)(struct phy *phy);
>  	void (*utmi_pad_power_down)(struct phy *phy);
> +	void (*utmi_pad_set_protection)(struct tegra_xusb_port *port,
> +					int level, enum tegra_vbus_dir dir);
>  };
>  
>  struct tegra_xusb_padctl_soc {
>
Thierry Reding June 4, 2020, 1:55 p.m. UTC | #2 
On Thu, May 14, 2020 at 11:52:40AM +0530, Nagarjuna Kristam wrote:
> When USB charger is enabled, UTMI PAD needs to be protected according
> to the direction and current level. Add support for the same on Tegra210
> and Tegra186.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> ---
> V3:
>  - Alligned function and its arguments.
>  - Fixed other comments from Thierry.
> ---
> V2:
>  - Commit message coorected.
>  - Patch re-based.
> ---
>  drivers/phy/tegra/xusb-tegra186.c | 40 +++++++++++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb-tegra210.c | 32 +++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb.h          | 13 +++++++++++++
>  3 files changed, 85 insertions(+)

Acked-by: Thierry Reding <treding@nvidia.com>
Thierry Reding June 4, 2020, 1:58 p.m. UTC | #3 
On Mon, May 18, 2020 at 05:54:03PM +0530, Kishon Vijay Abraham I wrote:
> Thierry,
> 
> On 5/14/2020 11:52 AM, Nagarjuna Kristam wrote:
> > When USB charger is enabled, UTMI PAD needs to be protected according
> > to the direction and current level. Add support for the same on Tegra210
> > and Tegra186.
> > 
> > Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> 
> Can you give your Acked by for pending patches in this series?

I went through these patches one more time and I think they're all good
now. I've acked the ones that didn't have my Acked-by yet.

Thierry
diff mbox series

Patch

diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index f862254..59b78a7 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -68,6 +68,13 @@ 
 #define   PORTX_SPEED_SUPPORT_MASK		(0x3)
 #define     PORT_SPEED_SUPPORT_GEN1		(0x0)
 
+#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x)       (0x84 + (x) * 0x40)
+#define  PD_VREG                                (1 << 6)
+#define  VREG_LEV(x)                            (((x) & 0x3) << 7)
+#define  VREG_DIR(x)                            (((x) & 0x3) << 11)
+#define  VREG_DIR_IN                            VREG_DIR(1)
+#define  VREG_DIR_OUT                           VREG_DIR(2)
+
 #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x)	(0x88 + (x) * 0x40)
 #define  HS_CURR_LEVEL(x)			((x) & 0x3f)
 #define  TERM_SEL				BIT(25)
@@ -289,6 +296,37 @@  static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
 	usb2->powered_on = false;
 }
 
+static void
+tegra186_xusb_padctl_utmi_pad_set_protection(struct tegra_xusb_port *port,
+					     int level,
+					     enum tegra_vbus_dir dir)
+{
+	u32 value;
+	struct tegra_xusb_padctl *padctl = port->padctl;
+	unsigned int index = port->index;
+
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	if (level < 0) {
+		/* disable pad protection */
+		value |= PD_VREG;
+		value &= ~VREG_LEV(~0);
+		value &= ~VREG_DIR(~0);
+	} else {
+		if (dir == TEGRA_VBUS_SOURCE)
+			value |= VREG_DIR_OUT;
+		else if (dir == TEGRA_VBUS_SINK)
+			value |= VREG_DIR_IN;
+
+		value &= ~PD_VREG;
+		value &= ~VREG_DIR(~0);
+		value &= ~VREG_LEV(~0);
+		value |= VREG_LEV(level);
+	}
+
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+}
+
 static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
 					       bool status)
 {
@@ -935,6 +973,8 @@  static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
 	.vbus_override = tegra186_xusb_padctl_vbus_override,
 	.utmi_pad_power_on = tegra_phy_xusb_utmi_pad_power_on,
 	.utmi_pad_power_down = tegra_phy_xusb_utmi_pad_power_down,
+	.utmi_pad_set_protection =
+			tegra186_xusb_padctl_utmi_pad_set_protection,
 };
 
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC)
diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index caf0890..80c4349 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -74,6 +74,8 @@ 
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL 0x1
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
+#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(x) (((x) & 0x3) << 7)
+#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(x) (((x) & 0x3) << 11)
 
 #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
 #define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD_ZI (1 << 29)
@@ -1116,6 +1118,34 @@  void tegra210_usb2_pad_power_down(struct phy *phy)
 	usb2->powered_on = false;
 }
 
+static void
+tegra210_xusb_padctl_utmi_pad_set_protection(struct tegra_xusb_port *port,
+					     int level,
+					     enum tegra_vbus_dir dir)
+{
+	u32 value;
+	struct tegra_xusb_padctl *padctl = port->padctl;
+	unsigned int index = port->index;
+
+	value = padctl_readl(padctl,
+			     XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	if (level < 0) {
+		/* disable pad protection */
+		value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
+		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
+		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
+	} else {
+		value &= ~XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
+		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
+		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
+		value |= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(level);
+	}
+
+	padctl_writel(padctl, value,
+		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+}
+
 static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
 				      int submode)
 {
@@ -2291,6 +2321,8 @@  static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
 	.utmi_port_reset = tegra210_utmi_port_reset,
 	.utmi_pad_power_on = tegra210_usb2_pad_power_on,
 	.utmi_pad_power_down = tegra210_usb2_pad_power_down,
+	.utmi_pad_set_protection =
+			tegra210_xusb_padctl_utmi_pad_set_protection,
 };
 
 static const char * const tegra210_xusb_padctl_supply_names[] = {
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 6995fc4..475bcc6 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -259,6 +259,17 @@  to_sata_pad(struct tegra_xusb_pad *pad)
  */
 struct tegra_xusb_port_ops;
 
+/*
+ * Tegra OTG port VBUS direction:
+ * default (based on port capability) or
+ * as source or sink
+ */
+enum tegra_vbus_dir {
+	TEGRA_VBUS_DEFAULT,
+	TEGRA_VBUS_SOURCE,
+	TEGRA_VBUS_SINK
+};
+
 struct tegra_xusb_port {
 	struct tegra_xusb_padctl *padctl;
 	struct tegra_xusb_lane *lane;
@@ -398,6 +409,8 @@  struct tegra_xusb_padctl_ops {
 	int (*utmi_port_reset)(struct phy *phy);
 	void (*utmi_pad_power_on)(struct phy *phy);
 	void (*utmi_pad_power_down)(struct phy *phy);
+	void (*utmi_pad_set_protection)(struct tegra_xusb_port *port,
+					int level, enum tegra_vbus_dir dir);
 };
 
 struct tegra_xusb_padctl_soc {