| Message ID | 1618567313-25373-5-git-send-email-sanm@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | USB DWC3 host wake up support from system suspend | expand |
On Fri, Apr 16, 2021 at 03:31:52PM +0530, Sandeep Maheswaram wrote: > Configure interrupts based on hs_phy_mode to avoid triggering of > interrupts during system suspend and suspend the device successfully. > > Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> > --- > drivers/usb/dwc3/dwc3-qcom.c | 26 ++++++++++++++++++++------ > 1 file changed, 20 insertions(+), 6 deletions(-) > > diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c > index 66183c6..b1e9061 100644 > --- a/drivers/usb/dwc3/dwc3-qcom.c > +++ b/drivers/usb/dwc3/dwc3-qcom.c > @@ -316,22 +316,36 @@ static void dwc3_qcom_disable_wakeup_irq(int irq) > > static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) > { > - dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq); > + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); > > - dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq); > + dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq); > > - dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); > + if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_LS) > + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq); > + else if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_HS) > + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); > + else { > + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq); > + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); > + } nit: 'if' and 'else if' branches should also have curly braces since 'else' has them. > dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq); > } > > static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) > { > - dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq); > + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); > > - dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq); > + dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq); > > - dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq); > + if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_LS) > + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq); > + else if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_HS) > + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq); > + else { > + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq); > + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq); > + } ditto > dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq); > } Other than the nits: Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 66183c6..b1e9061 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -316,22 +316,36 @@ static void dwc3_qcom_disable_wakeup_irq(int irq) static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) { - dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq); + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); - dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq); + dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq); - dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); + if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_LS) + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq); + else if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_HS) + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); + else { + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq); + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); + } dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq); } static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) { - dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq); + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); - dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq); + dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq); - dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq); + if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_LS) + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq); + else if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_HS) + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq); + else { + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq); + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq); + } dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq); }
Configure interrupts based on hs_phy_mode to avoid triggering of interrupts during system suspend and suspend the device successfully. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> --- drivers/usb/dwc3/dwc3-qcom.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-)