| Message ID | 1620112135-1388-3-git-send-email-sanm@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add DT bindings and DT nodes for USB in SC7280 | expand |
On Tue, May 04, 2021 at 12:38:55PM +0530, Sandeep Maheswaram wrote: > Add USB nodes for sc7280 IDP board. > > Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/sc7280-idp.dts | 39 +++++++++++++++++++++++++++++++++ > 1 file changed, 39 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts > index 54d2cb3..ff48d21 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts > +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts > @@ -242,6 +242,45 @@ > status = "okay"; > }; > > +&usb_1 { > + status = "okay"; > +}; > + > +&usb_1_dwc3 { > + dr_mode = "host"; > +}; > + > +&usb_1_hsphy { > + status = "okay"; > + > + vdda-pll-supply = <&vreg_l10c_0p8>; > + vdda33-supply = <&vreg_l2b_3p0>; > + vdda18-supply = <&vreg_l1c_1p8>; > +}; > + > +&usb_1_qmpphy { > + status = "okay"; > + > + vdda-phy-supply = <&vreg_l6b_1p2>; > + vdda-pll-supply = <&vreg_l1b_0p8>; > +}; > + > +&usb_2 { > + status = "okay"; > +}; > + > +&usb_2_dwc3 { > + dr_mode = "peripheral"; > +}; > + > +&usb_2_hsphy { > + status = "okay"; > + > + vdda-pll-supply = <&vreg_l10c_0p8>; > + vdda33-supply = <&vreg_l2b_3p0>; > + vdda18-supply = <&vreg_l1c_1p8>; > +}; > + > /* PINCTRL - additions to nodes defined in sc7280.dtsi */ > > &qup_uart5_default { Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 54d2cb3..ff48d21 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -242,6 +242,45 @@ status = "okay"; }; +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l10c_0p8>; + vdda33-supply = <&vreg_l2b_3p0>; + vdda18-supply = <&vreg_l1c_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p8>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l10c_0p8>; + vdda33-supply = <&vreg_l2b_3p0>; + vdda18-supply = <&vreg_l1c_1p8>; +}; + /* PINCTRL - additions to nodes defined in sc7280.dtsi */ &qup_uart5_default {
Add USB nodes for sc7280 IDP board. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> --- arch/arm64/boot/dts/qcom/sc7280-idp.dts | 39 +++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)