diff mbox series

[v5,2/3] arm64: dts: qcom: sc7280: Add USB related nodes

Message ID 1625576413-12324-3-git-send-email-sanm@codeaurora.org (mailing list archive)
State Accepted
Commit bb9efa59c6656fe05f3ec6480a01fea5e9425898
Headers show
Series Add DT bindings and DT nodes for USB in SC7280 | expand

Commit Message

Sandeep Maheswaram July 6, 2021, 1 p.m. UTC
Add nodes for DWC3 USB controller, QMP and HS USB PHYs in sc7280 SOC.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
Changed qmp usb phy to usb dp phy combo node as per Stephen's comments.
Changed dwc to usb and added SC7280 compatible as per Bjorn's comments.

 arch/arm64/boot/dts/qcom/sc7280.dtsi | 164 +++++++++++++++++++++++++++++++++++
 1 file changed, 164 insertions(+)

Comments

Stephen Boyd July 9, 2021, 12:36 a.m. UTC | #1
Quoting Sandeep Maheswaram (2021-07-06 06:00:12)
> Add nodes for DWC3 USB controller, QMP and HS USB PHYs in sc7280 SOC.
>
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Stephen Boyd Aug. 17, 2021, 7:58 p.m. UTC | #2
Quoting Sandeep Maheswaram (2021-07-06 06:00:12)
> Add nodes for DWC3 USB controller, QMP and HS USB PHYs in sc7280 SOC.
>
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> ---
> Changed qmp usb phy to usb dp phy combo node as per Stephen's comments.
> Changed dwc to usb and added SC7280 compatible as per Bjorn's comments.
>
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 164 +++++++++++++++++++++++++++++++++++
>  1 file changed, 164 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index a8c274a..cd6908f 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -1035,6 +1035,125 @@
>                         };
>                 };
>
[...]
> +
> +               usb_2: usb@8cf8800 {
> +                       compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
> +                       reg = <0 0x08cf8800 0 0x400>;
> +                       status = "disabled";
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges;
> +                       dma-ranges;
> +
> +                       clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
> +                                <&gcc GCC_USB30_SEC_MASTER_CLK>,
> +                                <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
> +                                <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
> +                                <&gcc GCC_USB30_SEC_SLEEP_CLK>;
> +                       clock-names = "cfg_noc", "core", "iface","mock_utmi",
> +                                     "sleep";
> +
> +                       assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
> +                                         <&gcc GCC_USB30_SEC_MASTER_CLK>;
> +                       assigned-clock-rates = <19200000>, <200000000>;
> +
> +                       interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <&pdc 13 IRQ_TYPE_EDGE_RISING>,
> +                                    <&pdc 12 IRQ_TYPE_EDGE_RISING>;

I'm seeing this cause a warning at boot

[    4.724756] irq: type mismatch, failed to map hwirq-12 for
interrupt-controller@b220000!
[    4.733401] irq: type mismatch, failed to map hwirq-13 for
interrupt-controller@b220000!

> +                       interrupt-names = "hs_phy_irq",
> +                                         "dm_hs_phy_irq", "dp_hs_phy_irq";
> +
> +                       power-domains = <&gcc GCC_USB30_SEC_GDSC>;
> +
> +                       resets = <&gcc GCC_USB30_SEC_BCR>;
> +
> +                       usb_2_dwc3: usb@8c00000 {
> +                               compatible = "snps,dwc3";
> +                               reg = <0 0x08c00000 0 0xe000>;
> +                               interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
> +                               iommus = <&apps_smmu 0xa0 0x0>;
> +                               snps,dis_u2_susphy_quirk;
> +                               snps,dis_enblslpm_quirk;
> +                               phys = <&usb_2_hsphy>;
> +                               phy-names = "usb2-phy";
> +                               maximum-speed = "high-speed";
> +                       };
> +               };
> +
>                 dc_noc: interconnect@90e0000 {
>                         reg = <0 0x090e0000 0 0x5080>;
>                         compatible = "qcom,sc7280-dc-noc";
> @@ -1063,6 +1182,51 @@
>                         qcom,bcm-voters = <&apps_bcm_voter>;
>                 };
>
> +               usb_1: usb@a6f8800 {
> +                       compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
> +                       reg = <0 0x0a6f8800 0 0x400>;
> +                       status = "disabled";
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges;
> +                       dma-ranges;
> +
> +                       clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
> +                                <&gcc GCC_USB30_PRIM_MASTER_CLK>,
> +                                <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
> +                                <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> +                                <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
> +                       clock-names = "cfg_noc", "core", "iface", "mock_utmi",
> +                                     "sleep";
> +
> +                       assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> +                                         <&gcc GCC_USB30_PRIM_MASTER_CLK>;
> +                       assigned-clock-rates = <19200000>, <200000000>;
> +
> +                       interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> +                                             <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
> +                                             <&pdc 15 IRQ_TYPE_EDGE_BOTH>,

And this one too.

[    4.898667] irq: type mismatch, failed to map hwirq-14 for
interrupt-controller@b220000!
[    4.907241] irq: type mismatch, failed to map hwirq-15 for
interrupt-controller@b220000!

which looks like genirq code is complaining that the type is different
than what it is configured for. Are these trigger flags correct? If so,
then there' some sort of bug in the pdc driver.

> +                                             <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
> +                                         "dm_hs_phy_irq", "ss_phy_irq";
> +
> +                       power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
> +
> +                       resets = <&gcc GCC_USB30_PRIM_BCR>;
> +
> +                       usb_1_dwc3: usb@a600000 {
Sandeep Maheswaram Aug. 20, 2021, 5:34 a.m. UTC | #3
Hi Stephen,

On 8/18/2021 1:28 AM, Stephen Boyd wrote:
> Quoting Sandeep Maheswaram (2021-07-06 06:00:12)
>> Add nodes for DWC3 USB controller, QMP and HS USB PHYs in sc7280 SOC.
>>
>> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
>> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
>> ---
>> Changed qmp usb phy to usb dp phy combo node as per Stephen's comments.
>> Changed dwc to usb and added SC7280 compatible as per Bjorn's comments.
>>
>>   arch/arm64/boot/dts/qcom/sc7280.dtsi | 164 +++++++++++++++++++++++++++++++++++
>>   1 file changed, 164 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> index a8c274a..cd6908f 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> @@ -1035,6 +1035,125 @@
>>                          };
>>                  };
>>
> [...]
>> +
>> +               usb_2: usb@8cf8800 {
>> +                       compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
>> +                       reg = <0 0x08cf8800 0 0x400>;
>> +                       status = "disabled";
>> +                       #address-cells = <2>;
>> +                       #size-cells = <2>;
>> +                       ranges;
>> +                       dma-ranges;
>> +
>> +                       clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
>> +                                <&gcc GCC_USB30_SEC_MASTER_CLK>,
>> +                                <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
>> +                                <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
>> +                                <&gcc GCC_USB30_SEC_SLEEP_CLK>;
>> +                       clock-names = "cfg_noc", "core", "iface","mock_utmi",
>> +                                     "sleep";
>> +
>> +                       assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
>> +                                         <&gcc GCC_USB30_SEC_MASTER_CLK>;
>> +                       assigned-clock-rates = <19200000>, <200000000>;
>> +
>> +                       interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
>> +                                    <&pdc 13 IRQ_TYPE_EDGE_RISING>,
>> +                                    <&pdc 12 IRQ_TYPE_EDGE_RISING>;
> I'm seeing this cause a warning at boot
>
> [    4.724756] irq: type mismatch, failed to map hwirq-12 for
> interrupt-controller@b220000!
> [    4.733401] irq: type mismatch, failed to map hwirq-13 for
> interrupt-controller@b220000!
I should be using  IRQ_TYPE_LEVEL_HIGH. Will correct in next version.
>> +                       interrupt-names = "hs_phy_irq",
>> +                                         "dm_hs_phy_irq", "dp_hs_phy_irq";
>> +
>> +                       power-domains = <&gcc GCC_USB30_SEC_GDSC>;
>> +
>> +                       resets = <&gcc GCC_USB30_SEC_BCR>;
>> +
>> +                       usb_2_dwc3: usb@8c00000 {
>> +                               compatible = "snps,dwc3";
>> +                               reg = <0 0x08c00000 0 0xe000>;
>> +                               interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
>> +                               iommus = <&apps_smmu 0xa0 0x0>;
>> +                               snps,dis_u2_susphy_quirk;
>> +                               snps,dis_enblslpm_quirk;
>> +                               phys = <&usb_2_hsphy>;
>> +                               phy-names = "usb2-phy";
>> +                               maximum-speed = "high-speed";
>> +                       };
>> +               };
>> +
>>                  dc_noc: interconnect@90e0000 {
>>                          reg = <0 0x090e0000 0 0x5080>;
>>                          compatible = "qcom,sc7280-dc-noc";
>> @@ -1063,6 +1182,51 @@
>>                          qcom,bcm-voters = <&apps_bcm_voter>;
>>                  };
>>
>> +               usb_1: usb@a6f8800 {
>> +                       compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
>> +                       reg = <0 0x0a6f8800 0 0x400>;
>> +                       status = "disabled";
>> +                       #address-cells = <2>;
>> +                       #size-cells = <2>;
>> +                       ranges;
>> +                       dma-ranges;
>> +
>> +                       clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
>> +                                <&gcc GCC_USB30_PRIM_MASTER_CLK>,
>> +                                <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
>> +                                <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
>> +                                <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
>> +                       clock-names = "cfg_noc", "core", "iface", "mock_utmi",
>> +                                     "sleep";
>> +
>> +                       assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
>> +                                         <&gcc GCC_USB30_PRIM_MASTER_CLK>;
>> +                       assigned-clock-rates = <19200000>, <200000000>;
>> +
>> +                       interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
>> +                                             <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
>> +                                             <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
> And this one too.
>
> [    4.898667] irq: type mismatch, failed to map hwirq-14 for
> interrupt-controller@b220000!
> [    4.907241] irq: type mismatch, failed to map hwirq-15 for
> interrupt-controller@b220000!
>
> which looks like genirq code is complaining that the type is different
> than what it is configured for. Are these trigger flags correct? If so,
> then there' some sort of bug in the pdc driver.

I should be using  IRQ_TYPE_LEVEL_HIGH. Will correct in next version.


>
>> +                                             <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
>> +                       interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
>> +                                         "dm_hs_phy_irq", "ss_phy_irq";
>> +
>> +                       power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
>> +
>> +                       resets = <&gcc GCC_USB30_PRIM_BCR>;
>> +
>> +                       usb_1_dwc3: usb@a600000 {
Stephen Boyd Aug. 20, 2021, 6:44 a.m. UTC | #4
Quoting Sandeep Maheswaram (2021-08-19 22:34:14)
> On 8/18/2021 1:28 AM, Stephen Boyd wrote:
> > Quoting Sandeep Maheswaram (2021-07-06 06:00:12)
> >> Add nodes for DWC3 USB controller, QMP and HS USB PHYs in sc7280 SOC.
> >>
> >> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> >> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> >> ---
> >> Changed qmp usb phy to usb dp phy combo node as per Stephen's comments.
> >> Changed dwc to usb and added SC7280 compatible as per Bjorn's comments.
> >>
> >>   arch/arm64/boot/dts/qcom/sc7280.dtsi | 164 +++++++++++++++++++++++++++++++++++
> >>   1 file changed, 164 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> >> index a8c274a..cd6908f 100644
> >> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> >> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> >> @@ -1035,6 +1035,125 @@
> >>                          };
> >>                  };
> >>
> > [...]
> >> +
> >> +               usb_2: usb@8cf8800 {
> >> +                       compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
> >> +                       reg = <0 0x08cf8800 0 0x400>;
> >> +                       status = "disabled";
> >> +                       #address-cells = <2>;
> >> +                       #size-cells = <2>;
> >> +                       ranges;
> >> +                       dma-ranges;
> >> +
> >> +                       clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
> >> +                                <&gcc GCC_USB30_SEC_MASTER_CLK>,
> >> +                                <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
> >> +                                <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
> >> +                                <&gcc GCC_USB30_SEC_SLEEP_CLK>;
> >> +                       clock-names = "cfg_noc", "core", "iface","mock_utmi",
> >> +                                     "sleep";
> >> +
> >> +                       assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
> >> +                                         <&gcc GCC_USB30_SEC_MASTER_CLK>;
> >> +                       assigned-clock-rates = <19200000>, <200000000>;
> >> +
> >> +                       interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
> >> +                                    <&pdc 13 IRQ_TYPE_EDGE_RISING>,
> >> +                                    <&pdc 12 IRQ_TYPE_EDGE_RISING>;
> > I'm seeing this cause a warning at boot
> >
> > [    4.724756] irq: type mismatch, failed to map hwirq-12 for
> > interrupt-controller@b220000!
> > [    4.733401] irq: type mismatch, failed to map hwirq-13 for
> > interrupt-controller@b220000!
> I should be using  IRQ_TYPE_LEVEL_HIGH. Will correct in next version.

Ok. Please send a patch to fix it as this is already staged to be merged
in the next merge window.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index a8c274a..cd6908f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -1035,6 +1035,125 @@ 
 			};
 		};
 
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sc7280-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_2_hsphy: phy@88e4000 {
+			compatible = "qcom,sc7280-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e4000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+		};
+
+		usb_1_qmpphy: phy-wrapper@88e9000 {
+			compatible = "qcom,sc7280-qmp-usb3-dp-phy",
+				     "qcom,sm8250-qmp-usb3-dp-phy";
+			reg = <0 0x088e9000 0 0x200>,
+			      <0 0x088e8000 0 0x40>,
+			      <0 0x088ea000 0 0x200>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "com_aux";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: usb3-phy@88e9200 {
+				reg = <0 0x088e9200 0 0x200>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x400>,
+				      <0 0x088e9600 0 0x200>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x100>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+
+			dp_phy: dp-phy@88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eac00 0 0x400>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>,
+				      <0 0x088eaa00 0 0x100>;
+				#phy-cells = <0>;
+				#clock-cells = <1>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+		};
+
+		usb_2: usb@8cf8800 {
+			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
+			reg = <0 0x08cf8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core", "iface","mock_utmi",
+				      "sleep";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <&pdc 13 IRQ_TYPE_EDGE_RISING>,
+				     <&pdc 12 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "hs_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_SEC_GDSC>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			usb_2_dwc3: usb@8c00000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x08c00000 0 0xe000>;
+				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0xa0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_2_hsphy>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+			};
+		};
+
 		dc_noc: interconnect@90e0000 {
 			reg = <0 0x090e0000 0 0x5080>;
 			compatible = "qcom,sc7280-dc-noc";
@@ -1063,6 +1182,51 @@ 
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+				      "sleep";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
+					  "dm_hs_phy_irq", "ss_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xe000>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0xe0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				maximum-speed = "super-speed";
+			};
+		};
+
 		videocc: clock-controller@aaf0000 {
 			compatible = "qcom,sc7280-videocc";
 			reg = <0 0xaaf0000 0 0x10000>;