Message ID | 1652159580-30959-1-git-send-email-u0084500@gmail.com (mailing list archive) |
---|---|
State | Accepted |
Commit | 4031cd95cba70c72e4cadc2d46624bcd31e5a6c0 |
Headers | show |
Series | [v2] usb: typec: tcpci_mt6360: Update for BMC PHY setting | expand |
On Tue, 2022-05-10 at 13:13 +0800, cy_huang wrote: > From: ChiYuan Huang <cy_huang@richtek.com> > > Update MT6360 BMC PHY Tx/Rx setting for the compatibility. > > Macpaul reported this CtoDP cable attention message cannot be > received from > MT6360 TCPC. But actually, attention message really sent from UFP_D > device. > > After RD's comment, there may be BMC PHY Tx/Rx setting causes this > issue. > > Below's the detailed TCPM log and DP attention message didn't > received from 6360 > TCPCI. > [ 1206.367775] Identity: 0000:0000.0000 > [ 1206.416570] Alternate mode 0: SVID 0xff01, VDO 1: 0x00000405 > [ 1206.447378] AMS DFP_TO_UFP_ENTER_MODE start > [ 1206.447383] PD TX, header: 0x1d6f > [ 1206.449393] PD TX complete, status: 0 > [ 1206.454110] PD RX, header: 0x184f [1] > [ 1206.456867] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1 > [ 1206.456872] AMS DFP_TO_UFP_ENTER_MODE finished > [ 1206.456873] cc:=4 > [ 1206.473100] AMS STRUCTURED_VDMS start > [ 1206.473103] PD TX, header: 0x2f6f > [ 1206.475397] PD TX complete, status: 0 > [ 1206.480442] PD RX, header: 0x2a4f [1] > [ 1206.483145] Rx VDM cmd 0xff018150 type 1 cmd 16 len 2 > [ 1206.483150] AMS STRUCTURED_VDMS finished > [ 1206.483151] cc:=4 > [ 1206.505643] AMS STRUCTURED_VDMS start > [ 1206.505646] PD TX, header: 0x216f > [ 1206.507933] PD TX complete, status: 0 > [ 1206.512664] PD RX, header: 0x1c4f [1] > [ 1206.515456] Rx VDM cmd 0xff018151 type 1 cmd 17 len 1 > [ 1206.515460] AMS STRUCTURED_VDMS finished > [ 1206.515461] cc:=4 > > Fixes: e1aefcdd394fd ("usb typec: mt6360: Add support for mt6360 > Type-C driver") > Reported-by: Macpaul Lin <macpaul.lin@mediatek.com> > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> > Signed-off-by: Fabien Parent <fparent@baylibre.com> > Cc: stable <stable@vger.kernel.org> > --- > drivers/usb/typec/tcpm/tcpci_mt6360.c | 26 > ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/drivers/usb/typec/tcpm/tcpci_mt6360.c > b/drivers/usb/typec/tcpm/tcpci_mt6360.c > index f1bd9e0..8a952ea 100644 > --- a/drivers/usb/typec/tcpm/tcpci_mt6360.c > +++ b/drivers/usb/typec/tcpm/tcpci_mt6360.c > @@ -15,6 +15,9 @@ > > #include "tcpci.h" > > +#define MT6360_REG_PHYCTRL1 0x80 > +#define MT6360_REG_PHYCTRL3 0x82 > +#define MT6360_REG_PHYCTRL7 0x86 > #define MT6360_REG_VCONNCTRL1 0x8C > #define MT6360_REG_MODECTRL2 0x8F > #define MT6360_REG_SWRESET 0xA0 > @@ -22,6 +25,8 @@ > #define MT6360_REG_DRPCTRL1 0xA2 > #define MT6360_REG_DRPCTRL2 0xA3 > #define MT6360_REG_I2CTORST 0xBF > +#define MT6360_REG_PHYCTRL11 0xCA > +#define MT6360_REG_RXCTRL1 0xCE > #define MT6360_REG_RXCTRL2 0xCF > #define MT6360_REG_CTDCTRL2 0xEC > > @@ -106,6 +111,27 @@ static int mt6360_tcpc_init(struct tcpci *tcpci, > struct tcpci_data *tdata) > if (ret) > return ret; > > + /* BMC PHY */ > + ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL1, 0x3A70); > + if (ret) > + return ret; > + > + ret = regmap_write(regmap, MT6360_REG_PHYCTRL3, 0x82); > + if (ret) > + return ret; > + > + ret = regmap_write(regmap, MT6360_REG_PHYCTRL7, 0x36); > + if (ret) > + return ret; > + > + ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL11, > 0x3C60); > + if (ret) > + return ret; > + > + ret = regmap_write(regmap, MT6360_REG_RXCTRL1, 0xE8); > + if (ret) > + return ret; > + > /* Set shipping mode off, AUTOIDLE on */ > return regmap_write(regmap, MT6360_REG_MODECTRL2, 0x7A); > } Thanks for helping me to fix this issue. Tested-by: Macpaul Lin <macpaul.lin@mediatek.com> Regards, Macpaul Lin
On 5/9/22 22:13, cy_huang wrote: > From: ChiYuan Huang <cy_huang@richtek.com> > > Update MT6360 BMC PHY Tx/Rx setting for the compatibility. > > Macpaul reported this CtoDP cable attention message cannot be received from > MT6360 TCPC. But actually, attention message really sent from UFP_D > device. > > After RD's comment, there may be BMC PHY Tx/Rx setting causes this issue. > > Below's the detailed TCPM log and DP attention message didn't received from 6360 > TCPCI. > [ 1206.367775] Identity: 0000:0000.0000 > [ 1206.416570] Alternate mode 0: SVID 0xff01, VDO 1: 0x00000405 > [ 1206.447378] AMS DFP_TO_UFP_ENTER_MODE start > [ 1206.447383] PD TX, header: 0x1d6f > [ 1206.449393] PD TX complete, status: 0 > [ 1206.454110] PD RX, header: 0x184f [1] > [ 1206.456867] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1 > [ 1206.456872] AMS DFP_TO_UFP_ENTER_MODE finished > [ 1206.456873] cc:=4 > [ 1206.473100] AMS STRUCTURED_VDMS start > [ 1206.473103] PD TX, header: 0x2f6f > [ 1206.475397] PD TX complete, status: 0 > [ 1206.480442] PD RX, header: 0x2a4f [1] > [ 1206.483145] Rx VDM cmd 0xff018150 type 1 cmd 16 len 2 > [ 1206.483150] AMS STRUCTURED_VDMS finished > [ 1206.483151] cc:=4 > [ 1206.505643] AMS STRUCTURED_VDMS start > [ 1206.505646] PD TX, header: 0x216f > [ 1206.507933] PD TX complete, status: 0 > [ 1206.512664] PD RX, header: 0x1c4f [1] > [ 1206.515456] Rx VDM cmd 0xff018151 type 1 cmd 17 len 1 > [ 1206.515460] AMS STRUCTURED_VDMS finished > [ 1206.515461] cc:=4 > > Fixes: e1aefcdd394fd ("usb typec: mt6360: Add support for mt6360 Type-C driver") > Reported-by: Macpaul Lin <macpaul.lin@mediatek.com> > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> > Signed-off-by: Fabien Parent <fparent@baylibre.com> > Cc: stable <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> > --- > drivers/usb/typec/tcpm/tcpci_mt6360.c | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/drivers/usb/typec/tcpm/tcpci_mt6360.c b/drivers/usb/typec/tcpm/tcpci_mt6360.c > index f1bd9e0..8a952ea 100644 > --- a/drivers/usb/typec/tcpm/tcpci_mt6360.c > +++ b/drivers/usb/typec/tcpm/tcpci_mt6360.c > @@ -15,6 +15,9 @@ > > #include "tcpci.h" > > +#define MT6360_REG_PHYCTRL1 0x80 > +#define MT6360_REG_PHYCTRL3 0x82 > +#define MT6360_REG_PHYCTRL7 0x86 > #define MT6360_REG_VCONNCTRL1 0x8C > #define MT6360_REG_MODECTRL2 0x8F > #define MT6360_REG_SWRESET 0xA0 > @@ -22,6 +25,8 @@ > #define MT6360_REG_DRPCTRL1 0xA2 > #define MT6360_REG_DRPCTRL2 0xA3 > #define MT6360_REG_I2CTORST 0xBF > +#define MT6360_REG_PHYCTRL11 0xCA > +#define MT6360_REG_RXCTRL1 0xCE > #define MT6360_REG_RXCTRL2 0xCF > #define MT6360_REG_CTDCTRL2 0xEC > > @@ -106,6 +111,27 @@ static int mt6360_tcpc_init(struct tcpci *tcpci, struct tcpci_data *tdata) > if (ret) > return ret; > > + /* BMC PHY */ > + ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL1, 0x3A70); > + if (ret) > + return ret; > + > + ret = regmap_write(regmap, MT6360_REG_PHYCTRL3, 0x82); > + if (ret) > + return ret; > + > + ret = regmap_write(regmap, MT6360_REG_PHYCTRL7, 0x36); > + if (ret) > + return ret; > + > + ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL11, 0x3C60); > + if (ret) > + return ret; > + > + ret = regmap_write(regmap, MT6360_REG_RXCTRL1, 0xE8); > + if (ret) > + return ret; > + > /* Set shipping mode off, AUTOIDLE on */ > return regmap_write(regmap, MT6360_REG_MODECTRL2, 0x7A); > }
On Tue, May 10, 2022 at 01:13:00PM +0800, cy_huang wrote: > From: ChiYuan Huang <cy_huang@richtek.com> > > Update MT6360 BMC PHY Tx/Rx setting for the compatibility. > > Macpaul reported this CtoDP cable attention message cannot be received from > MT6360 TCPC. But actually, attention message really sent from UFP_D > device. > > After RD's comment, there may be BMC PHY Tx/Rx setting causes this issue. > > Below's the detailed TCPM log and DP attention message didn't received from 6360 > TCPCI. > [ 1206.367775] Identity: 0000:0000.0000 > [ 1206.416570] Alternate mode 0: SVID 0xff01, VDO 1: 0x00000405 > [ 1206.447378] AMS DFP_TO_UFP_ENTER_MODE start > [ 1206.447383] PD TX, header: 0x1d6f > [ 1206.449393] PD TX complete, status: 0 > [ 1206.454110] PD RX, header: 0x184f [1] > [ 1206.456867] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1 > [ 1206.456872] AMS DFP_TO_UFP_ENTER_MODE finished > [ 1206.456873] cc:=4 > [ 1206.473100] AMS STRUCTURED_VDMS start > [ 1206.473103] PD TX, header: 0x2f6f > [ 1206.475397] PD TX complete, status: 0 > [ 1206.480442] PD RX, header: 0x2a4f [1] > [ 1206.483145] Rx VDM cmd 0xff018150 type 1 cmd 16 len 2 > [ 1206.483150] AMS STRUCTURED_VDMS finished > [ 1206.483151] cc:=4 > [ 1206.505643] AMS STRUCTURED_VDMS start > [ 1206.505646] PD TX, header: 0x216f > [ 1206.507933] PD TX complete, status: 0 > [ 1206.512664] PD RX, header: 0x1c4f [1] > [ 1206.515456] Rx VDM cmd 0xff018151 type 1 cmd 17 len 1 > [ 1206.515460] AMS STRUCTURED_VDMS finished > [ 1206.515461] cc:=4 > > Fixes: e1aefcdd394fd ("usb typec: mt6360: Add support for mt6360 Type-C driver") > Reported-by: Macpaul Lin <macpaul.lin@mediatek.com> > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> > Signed-off-by: Fabien Parent <fparent@baylibre.com> > Cc: stable <stable@vger.kernel.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > --- > drivers/usb/typec/tcpm/tcpci_mt6360.c | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/drivers/usb/typec/tcpm/tcpci_mt6360.c b/drivers/usb/typec/tcpm/tcpci_mt6360.c > index f1bd9e0..8a952ea 100644 > --- a/drivers/usb/typec/tcpm/tcpci_mt6360.c > +++ b/drivers/usb/typec/tcpm/tcpci_mt6360.c > @@ -15,6 +15,9 @@ > > #include "tcpci.h" > > +#define MT6360_REG_PHYCTRL1 0x80 > +#define MT6360_REG_PHYCTRL3 0x82 > +#define MT6360_REG_PHYCTRL7 0x86 > #define MT6360_REG_VCONNCTRL1 0x8C > #define MT6360_REG_MODECTRL2 0x8F > #define MT6360_REG_SWRESET 0xA0 > @@ -22,6 +25,8 @@ > #define MT6360_REG_DRPCTRL1 0xA2 > #define MT6360_REG_DRPCTRL2 0xA3 > #define MT6360_REG_I2CTORST 0xBF > +#define MT6360_REG_PHYCTRL11 0xCA > +#define MT6360_REG_RXCTRL1 0xCE > #define MT6360_REG_RXCTRL2 0xCF > #define MT6360_REG_CTDCTRL2 0xEC > > @@ -106,6 +111,27 @@ static int mt6360_tcpc_init(struct tcpci *tcpci, struct tcpci_data *tdata) > if (ret) > return ret; > > + /* BMC PHY */ > + ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL1, 0x3A70); > + if (ret) > + return ret; > + > + ret = regmap_write(regmap, MT6360_REG_PHYCTRL3, 0x82); > + if (ret) > + return ret; > + > + ret = regmap_write(regmap, MT6360_REG_PHYCTRL7, 0x36); > + if (ret) > + return ret; > + > + ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL11, 0x3C60); > + if (ret) > + return ret; > + > + ret = regmap_write(regmap, MT6360_REG_RXCTRL1, 0xE8); > + if (ret) > + return ret; > + > /* Set shipping mode off, AUTOIDLE on */ > return regmap_write(regmap, MT6360_REG_MODECTRL2, 0x7A); > } > -- > 2.7.4
diff --git a/drivers/usb/typec/tcpm/tcpci_mt6360.c b/drivers/usb/typec/tcpm/tcpci_mt6360.c index f1bd9e0..8a952ea 100644 --- a/drivers/usb/typec/tcpm/tcpci_mt6360.c +++ b/drivers/usb/typec/tcpm/tcpci_mt6360.c @@ -15,6 +15,9 @@ #include "tcpci.h" +#define MT6360_REG_PHYCTRL1 0x80 +#define MT6360_REG_PHYCTRL3 0x82 +#define MT6360_REG_PHYCTRL7 0x86 #define MT6360_REG_VCONNCTRL1 0x8C #define MT6360_REG_MODECTRL2 0x8F #define MT6360_REG_SWRESET 0xA0 @@ -22,6 +25,8 @@ #define MT6360_REG_DRPCTRL1 0xA2 #define MT6360_REG_DRPCTRL2 0xA3 #define MT6360_REG_I2CTORST 0xBF +#define MT6360_REG_PHYCTRL11 0xCA +#define MT6360_REG_RXCTRL1 0xCE #define MT6360_REG_RXCTRL2 0xCF #define MT6360_REG_CTDCTRL2 0xEC @@ -106,6 +111,27 @@ static int mt6360_tcpc_init(struct tcpci *tcpci, struct tcpci_data *tdata) if (ret) return ret; + /* BMC PHY */ + ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL1, 0x3A70); + if (ret) + return ret; + + ret = regmap_write(regmap, MT6360_REG_PHYCTRL3, 0x82); + if (ret) + return ret; + + ret = regmap_write(regmap, MT6360_REG_PHYCTRL7, 0x36); + if (ret) + return ret; + + ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL11, 0x3C60); + if (ret) + return ret; + + ret = regmap_write(regmap, MT6360_REG_RXCTRL1, 0xE8); + if (ret) + return ret; + /* Set shipping mode off, AUTOIDLE on */ return regmap_write(regmap, MT6360_REG_MODECTRL2, 0x7A); }