diff mbox series

[v1,1/2] usb: dwc3: gadget: Change condition for processing suspend event

Message ID 1677129510-10283-2-git-send-email-quic_prashk@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Fix vbus draw of dwc3 gadget | expand

Commit Message

Prashanth K Feb. 23, 2023, 5:18 a.m. UTC
Currently we process the suspend interrupt event only if the
device is in configured state. Consider a case where device
is not configured and got suspend interrupt, in that case our
gadget will still use 100mA as composite_suspend didn't happen.
But battery charging specification (BC1.2) expects a downstream
device to draw less than 2.5mA when unconnected OR suspended.

Fix this by removing the condition for processing suspend event,
and thus composite_resume would set vbus draw to 2.

Fixes: 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
---
 drivers/usb/dwc3/gadget.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 3c63fa9..07989c6 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -4239,15 +4239,8 @@  static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 		break;
 	case DWC3_DEVICE_EVENT_SUSPEND:
 		/* It changed to be suspend event for version 2.30a and above */
-		if (!DWC3_VER_IS_PRIOR(DWC3, 230A)) {
-			/*
-			 * Ignore suspend event until the gadget enters into
-			 * USB_STATE_CONFIGURED state.
-			 */
-			if (dwc->gadget->state >= USB_STATE_CONFIGURED)
-				dwc3_gadget_suspend_interrupt(dwc,
-						event->event_info);
-		}
+		if (!DWC3_VER_IS_PRIOR(DWC3, 230A))
+			dwc3_gadget_suspend_interrupt(dwc, event->event_info);
 		break;
 	case DWC3_DEVICE_EVENT_SOF:
 	case DWC3_DEVICE_EVENT_ERRATIC_ERROR: