@@ -4241,15 +4241,8 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc,
break;
case DWC3_DEVICE_EVENT_SUSPEND:
/* It changed to be suspend event for version 2.30a and above */
- if (!DWC3_VER_IS_PRIOR(DWC3, 230A)) {
- /*
- * Ignore suspend event until the gadget enters into
- * USB_STATE_CONFIGURED state.
- */
- if (dwc->gadget->state >= USB_STATE_CONFIGURED)
- dwc3_gadget_suspend_interrupt(dwc,
- event->event_info);
- }
+ if (!DWC3_VER_IS_PRIOR(DWC3, 230A))
+ dwc3_gadget_suspend_interrupt(dwc, event->event_info);
break;
case DWC3_DEVICE_EVENT_SOF:
case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
Currently we process the suspend interrupt event only if the device is in configured state. Consider a case where device is not configured and got suspend interrupt, in that case our gadget will still use 100mA as composite_suspend didn't happen. But battery charging specification (BC1.2) expects a downstream device to draw less than 2.5mA when unconnected OR suspended. Fix this by removing the condition for processing suspend event, and thus composite_resume would set vbus draw to 2. Fixes: 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler") Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> --- drivers/usb/dwc3/gadget.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)