@@ -527,6 +527,7 @@
#define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c
#define DWC3_DGCMD_SET_ENDPOINT_PRIME 0x0d
#define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10
+#define DWC3_DGCMD_DEV_NOTIFICATION 0x07
#define DWC3_DGCMD_STATUS(n) (((n) >> 12) & 0x0F)
#define DWC3_DGCMD_CMDACT BIT(10)
@@ -539,6 +540,8 @@
#define DWC3_DGCMDPAR_TX_FIFO BIT(5)
#define DWC3_DGCMDPAR_LOOPBACK_DIS (0 << 0)
#define DWC3_DGCMDPAR_LOOPBACK_ENA BIT(0)
+#define DWC3_DGCMDPAR_DN_FUNC_WAKE BIT(0)
+#define DWC3_DGCMDPAR_INTF_SEL(n) ((n) << 4)
/* Device Endpoint Command Register */
#define DWC3_DEPCMD_PARAM_SHIFT 16
@@ -72,6 +72,8 @@ dwc3_gadget_generic_cmd_string(u8 cmd)
return "Set Endpoint Prime";
case DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK:
return "Run SoC Bus Loopback Test";
+ case DWC3_DGCMD_DEV_NOTIFICATION:
+ return "Device Notification";
default:
return "UNKNOWN";
}
@@ -30,6 +30,8 @@
static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
struct dwc3_ep *dep, struct dwc3_request *req);
+static int dwc3_ep0_delegate_req(struct dwc3 *dwc,
+ struct usb_ctrlrequest *ctrl);
static void dwc3_ep0_prepare_one_trb(struct dwc3_ep *dep,
dma_addr_t buf_dma, u32 len, u32 type, bool chain)
@@ -368,7 +370,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
* Function Remote Wake Capable D0
* Function Remote Wakeup D1
*/
- break;
+ return dwc3_ep0_delegate_req(dwc, ctrl);
case USB_RECIP_ENDPOINT:
dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
@@ -517,13 +519,7 @@ static int dwc3_ep0_handle_intf(struct dwc3 *dwc,
switch (wValue) {
case USB_INTRF_FUNC_SUSPEND:
- /*
- * REVISIT: Ideally we would enable some low power mode here,
- * however it's unclear what we should be doing here.
- *
- * For now, we're not doing anything, just making sure we return
- * 0 so USB Command Verifier tests pass without any errors.
- */
+ ret = dwc3_ep0_delegate_req(dwc, ctrl);
break;
default:
ret = -EINVAL;
@@ -2391,6 +2391,47 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g)
return ret;
}
+static void dwc3_resume_gadget(struct dwc3 *dwc);
+
+static int dwc3_gadget_func_wakeup(struct usb_gadget *g, int intf_id)
+{
+ struct dwc3 *dwc = gadget_to_dwc(g);
+ unsigned long flags;
+ int ret;
+ int link_state;
+
+ if (!dwc->wakeup_configured) {
+ dev_err(dwc->dev, "remote wakeup not configured\n");
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&dwc->lock, flags);
+ /*
+ * If the link is in U3, signal for remote wakeup and wait for the
+ * link to transition to U0 before sending device notification.
+ */
+ link_state = dwc3_gadget_get_link_state(dwc);
+ if (link_state == DWC3_LINK_STATE_U3) {
+ ret = __dwc3_gadget_wakeup(dwc, false);
+ if (ret) {
+ spin_unlock_irqrestore(&dwc->lock, flags);
+ return -EINVAL;
+ }
+ dwc3_resume_gadget(dwc);
+ dwc->link_state = DWC3_LINK_STATE_U0;
+ }
+
+ ret = dwc3_send_gadget_generic_command(dwc, DWC3_DGCMD_DEV_NOTIFICATION,
+ DWC3_DGCMDPAR_DN_FUNC_WAKE |
+ DWC3_DGCMDPAR_INTF_SEL(intf_id));
+ if (ret)
+ dev_err(dwc->dev, "function remote wakeup failed, ret:%d\n", ret);
+
+ spin_unlock_irqrestore(&dwc->lock, flags);
+
+ return ret;
+}
+
static int dwc3_gadget_set_remote_wakeup(struct usb_gadget *g, int set)
{
struct dwc3 *dwc = gadget_to_dwc(g);
@@ -3028,6 +3069,7 @@ static void dwc3_gadget_async_callbacks(struct usb_gadget *g, bool enable)
static const struct usb_gadget_ops dwc3_gadget_ops = {
.get_frame = dwc3_gadget_get_frame,
.wakeup = dwc3_gadget_wakeup,
+ .func_wakeup = dwc3_gadget_func_wakeup,
.set_remote_wakeup = dwc3_gadget_set_remote_wakeup,
.set_selfpowered = dwc3_gadget_set_selfpowered,
.pullup = dwc3_gadget_pullup,