diff mbox series

usb: common: usb-conn-gpio: Set last role to unknown before initial detection

Message ID 1684918441-14794-1-git-send-email-quic_prashk@quicinc.com (mailing list archive)
State Superseded
Headers show
Series usb: common: usb-conn-gpio: Set last role to unknown before initial detection | expand

Commit Message

Prashanth K May 24, 2023, 8:54 a.m. UTC
Currently if we bootup a device without cable connected, then
usb-conn-gpio won't call set_role() since last_role is same as
current role. This happens because during probe last_role gets
initialised to zero.

To avoid this, last_role is set to USB_ROLE_UNKNOWN before
performing the initial detection.

Fixes: 4602f3bff266 ("usb: common: add USB GPIO based connection detection driver")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
---
 drivers/usb/common/usb-conn-gpio.c | 5 +++++
 1 file changed, 5 insertions(+)

Comments

AngeloGioacchino Del Regno May 24, 2023, 9:40 a.m. UTC | #1
Il 24/05/23 10:54, Prashanth K ha scritto:
> Currently if we bootup a device without cable connected, then
> usb-conn-gpio won't call set_role() since last_role is same as
> current role. This happens because during probe last_role gets
> initialised to zero.
> 
> To avoid this, last_role is set to USB_ROLE_UNKNOWN before
> performing the initial detection.
> 
> Fixes: 4602f3bff266 ("usb: common: add USB GPIO based connection detection driver")
> Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
> ---
>   drivers/usb/common/usb-conn-gpio.c | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c
> index e20874c..00af735 100644
> --- a/drivers/usb/common/usb-conn-gpio.c
> +++ b/drivers/usb/common/usb-conn-gpio.c
> @@ -27,6 +27,8 @@
>   #define USB_CONN_IRQF	\
>   	(IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT)
>   
> +#define USB_ROLE_UNKNOWN	-1

I would add USB_ROLE_UNKNOWN to `enum usb_role` instead.

enum usb_role {
	USB_ROLE_UNKNOWN = -1,
	USB_ROLE_NONE,
	....
};

Regards,
Angelo

> +
>   struct usb_conn_info {
>   	struct device *dev;
>   	struct usb_role_switch *role_sw;
> @@ -257,6 +259,9 @@ static int usb_conn_probe(struct platform_device *pdev)
>   	platform_set_drvdata(pdev, info);
>   	device_set_wakeup_capable(&pdev->dev, true);
>   
> +	/* Set last role to unknown before performing the initial detection */
> +	info->last_role = USB_ROLE_UNKNOWN;
> +
>   	/* Perform initial detection */
>   	usb_conn_queue_dwork(info, 0);
>
Prashanth K May 24, 2023, 1:36 p.m. UTC | #2
On 24-05-23 03:10 pm, AngeloGioacchino Del Regno wrote:
> Il 24/05/23 10:54, Prashanth K ha scritto:
>> Currently if we bootup a device without cable connected, then
>> usb-conn-gpio won't call set_role() since last_role is same as
>> current role. This happens because during probe last_role gets
>> initialised to zero.
>>
>> To avoid this, last_role is set to USB_ROLE_UNKNOWN before
>> performing the initial detection.
>>
>> Fixes: 4602f3bff266 ("usb: common: add USB GPIO based connection 
>> detection driver")
>> Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
>> ---
>>   drivers/usb/common/usb-conn-gpio.c | 5 +++++
>>   1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/usb/common/usb-conn-gpio.c 
>> b/drivers/usb/common/usb-conn-gpio.c
>> index e20874c..00af735 100644
>> --- a/drivers/usb/common/usb-conn-gpio.c
>> +++ b/drivers/usb/common/usb-conn-gpio.c
>> @@ -27,6 +27,8 @@
>>   #define USB_CONN_IRQF    \
>>       (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT)
>> +#define USB_ROLE_UNKNOWN    -1
> 
> I would add USB_ROLE_UNKNOWN to `enum usb_role` instead.
> 
> enum usb_role {
>      USB_ROLE_UNKNOWN = -1,
>      USB_ROLE_NONE,
>      ....
> };
> 
> Regards,
> Angelo

Thanks for the suggestion Agnelo. Will change it in next patch.

Regards,
Prashanth K
diff mbox series

Patch

diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c
index e20874c..00af735 100644
--- a/drivers/usb/common/usb-conn-gpio.c
+++ b/drivers/usb/common/usb-conn-gpio.c
@@ -27,6 +27,8 @@ 
 #define USB_CONN_IRQF	\
 	(IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT)
 
+#define USB_ROLE_UNKNOWN	-1
+
 struct usb_conn_info {
 	struct device *dev;
 	struct usb_role_switch *role_sw;
@@ -257,6 +259,9 @@  static int usb_conn_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, info);
 	device_set_wakeup_capable(&pdev->dev, true);
 
+	/* Set last role to unknown before performing the initial detection */
+	info->last_role = USB_ROLE_UNKNOWN;
+
 	/* Perform initial detection */
 	usb_conn_queue_dwork(info, 0);