diff mbox

[3/3] usb: dwc3: pci: Use devm functions to get the phy GPIOs

Message ID 20180607103845.13515-3-hdegoede@redhat.com (mailing list archive)
State New, archived
Headers show

Commit Message

Hans de Goede June 7, 2018, 10:38 a.m. UTC 
Even though we only use them once, it is better to not put/release
the GPIOs immediately after use, so that others cannot claim them.

Use devm functions to get the phy GPIOs, so that they will be
automatically released when were unbound from the device and
remove the gpio_put calls.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/usb/dwc3/dwc3-pci.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 65bc110388f3..2659a68eefd2 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -189,20 +189,20 @@  static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 			 * put the gpio descriptors again here because the phy driver
 			 * might want to grab them, too.
 			 */
-			gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
+			gpio = devm_gpiod_get_optional(&pdev->dev, "cs",
+						       GPIOD_OUT_LOW);
 			if (IS_ERR(gpio))
 				return PTR_ERR(gpio);
 
 			gpiod_set_value_cansleep(gpio, 1);
-			gpiod_put(gpio);
 
-			gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
+			gpio = devm_gpiod_get_optional(&pdev->dev, "reset",
+						       GPIOD_OUT_LOW);
 			if (IS_ERR(gpio))
 				return PTR_ERR(gpio);
 
 			if (gpio) {
 				gpiod_set_value_cansleep(gpio, 1);
-				gpiod_put(gpio);
 				usleep_range(10000, 11000);
 			}
 		}