[v5,1/4] usb: chipidea: add flag for imx hsic implementation

Commit Message

Peter Chen Dec. 11, 2018, 2:08 a.m. UTC

NXP (Freecale) imx HSIC design has some special requirements, add
some flags at host code to handle them.

Reviewed-by: Frieder Schrempf <[e-mail]>
Tested-by: Frieder Schrempf <[e-mail]>
Signed-off-by: Peter Chen <[e-mail]>
---
 drivers/usb/chipidea/host.c  | 17 +++++++++++++++++
 include/linux/usb/chipidea.h |  3 +++
 2 files changed, 20 insertions(+)

Patch

diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index d858a82c4f44..028a3574266a 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -170,6 +170,11 @@  static int host_start(struct ci_hdrc *ci)
 			otg->host = &hcd->self;
 			hcd->self.otg_port = 1;
 		}
+
+		if (ci->platdata->notify_event &&
+			(ci->platdata->flags & CI_HDRC_IMX_IS_HSIC))
+			ci->platdata->notify_event
+				(ci, CI_HDRC_IMX_HSIC_ACTIVE_EVENT);
 	}
 
 	return ret;
@@ -218,6 +223,8 @@  void ci_hdrc_host_destroy(struct ci_hdrc *ci)
 static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
 {
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct device *dev = hcd->self.controller;
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
 	int port;
 	u32 tmp;
 
@@ -249,6 +256,16 @@  static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
 			 * It needs a short delay between set RS bit and PHCD.
 			 */
 			usleep_range(150, 200);
+			/*
+			 * Need to clear WKCN and WKOC for imx HSIC,
+			 * otherwise, there will be wakeup event.
+			 */
+			if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) {
+				tmp = ehci_readl(ehci, reg);
+				tmp &= ~(PORT_WKDISC_E | PORT_WKCONN_E);
+				ehci_writel(ehci, tmp, reg);
+			}
+
 			break;
 		}
 	}
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 63758c399e4e..911e05af671e 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -60,9 +60,12 @@  struct ci_hdrc_platform_data {
 #define CI_HDRC_OVERRIDE_RX_BURST	BIT(11)
 #define CI_HDRC_OVERRIDE_PHY_CONTROL	BIT(12) /* Glue layer manages phy */
 #define CI_HDRC_REQUIRES_ALIGNED_DMA	BIT(13)
+#define CI_HDRC_IMX_IS_HSIC		BIT(14)
 	enum usb_dr_mode	dr_mode;
 #define CI_HDRC_CONTROLLER_RESET_EVENT		0
 #define CI_HDRC_CONTROLLER_STOPPED_EVENT	1
+#define CI_HDRC_IMX_HSIC_ACTIVE_EVENT		2
+#define CI_HDRC_IMX_HSIC_SUSPEND_EVENT		3
 	int	(*notify_event) (struct ci_hdrc *ci, unsigned event);
 	struct regulator	*reg_vbus;
 	struct usb_otg_caps	ci_otg_caps;