@@ -181,9 +181,11 @@ static void dsps_musb_enable(struct musb *musb)
musb_writel(reg_base, wrp->epintr_set, epmask);
musb_writel(reg_base, wrp->coreintr_set, coremask);
- /* start polling for ID change in dual-role idle mode */
- if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
- musb->port_mode == MUSB_OTG)
+ /*
+ * start polling for runtime PM active and idle,
+ * and for ID change in dual-role idle mode.
+ */
+ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
dsps_mod_timer(glue, -1);
}
@@ -254,6 +256,10 @@ static int dsps_check_status(struct musb *musb, void *unused)
musb->xceiv->otg->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
}
+
+ if (musb->port_mode == MUSB_PERIPHERAL)
+ skip_session = 1;
+
if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
musb_writeb(mregs, MUSB_DEVCTL,
MUSB_DEVCTL_SESSION);
Since the runtime PM support was added in musb, dsps relies on the timer calling otg_timer() to activate the usb subsystem. However the driver doesn't enable the timer for peripheral port, then the peripheral port is unable to be enumerated by a host if the other usb port is disabled or in peripheral mode too. So let's start the timer for peripheral port too. Fixes: ea2f35c01d5e ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> --- drivers/usb/musb/musb_dsps.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)