diff mbox series

[v3,09/10] ARM64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs

Message ID 20190121112336.23489-10-miquel.raynal@bootlin.com (mailing list archive)
State Superseded
Headers show
Series A3700 USB S2RAM support | expand

Commit Message

Miquel Raynal Jan. 21, 2019, 11:23 a.m. UTC
On Marvell Armada 3700 SoCs there are two USB2 UTMI PHYs. They are
both very similar but only one has OTG/charging capabilities.

Because there are USB host registers and PHY registers mixed in a
single area, a system controller is also created and referenced from
both the USB host node and the PHY node.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 28 ++++++++++++++++++++
 1 file changed, 28 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 5cfd1b920f31..aeb2681428b3 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -344,18 +344,46 @@ 
 				compatible = "marvell,armada3700-xhci",
 				"generic-xhci";
 				reg = <0x58000 0x4000>;
+				marvell,usb-misc-reg = <&usb32_syscon>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&sb_periph_clk 12>;
 				status = "disabled";
 			};
 
+			usb2_utmi_otg_phy: phy@5d000 {
+				compatible = "marvell,a3700-utmi-otg-phy";
+				reg = <0x5d000 0x800>;
+				marvell,usb-misc-reg = <&usb32_syscon>;
+				#phy-cells = <0>;
+			};
+
+			usb32_syscon: system-controller@5d800 {
+				compatible = "marvell,usb2-host-device-miscellaneous",
+				"syscon";
+				reg = <0x5d800 0x800>;
+			};
+
 			usb2: usb@5e000 {
 				compatible = "marvell,armada-3700-ehci";
 				reg = <0x5e000 0x1000>;
+				marvell,usb-misc-reg = <&usb2_syscon>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
+			usb2_utmi_host_phy: phy@5f000 {
+				compatible = "marvell,a3700-utmi-host-phy";
+				reg = <0x5f000 0x800>;
+				marvell,usb-misc-reg = <&usb2_syscon>;
+				#phy-cells = <0>;
+			};
+
+			usb2_syscon: system-controller@5f800 {
+				compatible = "marvell,usb2-host-miscellaneous",
+				"syscon";
+				reg = <0x5f800 0x800>;
+			};
+
 			xor@60900 {
 				compatible = "marvell,armada-3700-xor";
 				reg = <0x60900 0x100>,