| Message ID | 20190121112336.23489-4-miquel.raynal@bootlin.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | A3700 USB S2RAM support | expand |
On Mon, 21 Jan 2019, Miquel Raynal wrote: > No need to initialize the PHY from the driver's probe. It is done by > the core automatically and doing it twice would increment the > phy->powercount counter to 2 instead of 1. During later suspend > operation, the counter will be decremented to one, no phy->power_off() > will occur and worse than that, the following phy->power_on() at > resume time will also be skipped, failing the whole S2RAM operation. > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > --- Acked-by: Alan Stern <stern@rowland.harvard.edu> > drivers/usb/host/ehci-orion.c | 26 +++----------------------- > 1 file changed, 3 insertions(+), 23 deletions(-) > > diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c > index 1ad72647a069..3109f082949e 100644 > --- a/drivers/usb/host/ehci-orion.c > +++ b/drivers/usb/host/ehci-orion.c > @@ -257,15 +257,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) > if (IS_ERR(priv->phy)) { > err = PTR_ERR(priv->phy); > if (err != -ENOSYS) > - goto err_phy_get; > - } else { > - err = phy_init(priv->phy); > - if (err) > - goto err_phy_init; > - > - err = phy_power_on(priv->phy); > - if (err) > - goto err_phy_power_on; > + goto err_dis_clk; > } > > /* > @@ -297,19 +289,12 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) > > err = usb_add_hcd(hcd, irq, IRQF_SHARED); > if (err) > - goto err_add_hcd; > + goto err_dis_clk; > > device_wakeup_enable(hcd->self.controller); > return 0; > > -err_add_hcd: > - if (!IS_ERR(priv->phy)) > - phy_power_off(priv->phy); > -err_phy_power_on: > - if (!IS_ERR(priv->phy)) > - phy_exit(priv->phy); > -err_phy_init: > -err_phy_get: > +err_dis_clk: > if (!IS_ERR(priv->clk)) > clk_disable_unprepare(priv->clk); > usb_put_hcd(hcd); > @@ -327,11 +312,6 @@ static int ehci_orion_drv_remove(struct platform_device *pdev) > > usb_remove_hcd(hcd); > > - if (!IS_ERR(priv->phy)) { > - phy_power_off(priv->phy); > - phy_exit(priv->phy); > - } > - > if (!IS_ERR(priv->clk)) > clk_disable_unprepare(priv->clk);
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 1ad72647a069..3109f082949e 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -257,15 +257,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) if (IS_ERR(priv->phy)) { err = PTR_ERR(priv->phy); if (err != -ENOSYS) - goto err_phy_get; - } else { - err = phy_init(priv->phy); - if (err) - goto err_phy_init; - - err = phy_power_on(priv->phy); - if (err) - goto err_phy_power_on; + goto err_dis_clk; } /* @@ -297,19 +289,12 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) - goto err_add_hcd; + goto err_dis_clk; device_wakeup_enable(hcd->self.controller); return 0; -err_add_hcd: - if (!IS_ERR(priv->phy)) - phy_power_off(priv->phy); -err_phy_power_on: - if (!IS_ERR(priv->phy)) - phy_exit(priv->phy); -err_phy_init: -err_phy_get: +err_dis_clk: if (!IS_ERR(priv->clk)) clk_disable_unprepare(priv->clk); usb_put_hcd(hcd); @@ -327,11 +312,6 @@ static int ehci_orion_drv_remove(struct platform_device *pdev) usb_remove_hcd(hcd); - if (!IS_ERR(priv->phy)) { - phy_power_off(priv->phy); - phy_exit(priv->phy); - } - if (!IS_ERR(priv->clk)) clk_disable_unprepare(priv->clk);
No need to initialize the PHY from the driver's probe. It is done by the core automatically and doing it twice would increment the phy->powercount counter to 2 instead of 1. During later suspend operation, the counter will be decremented to one, no phy->power_off() will occur and worse than that, the following phy->power_on() at resume time will also be skipped, failing the whole S2RAM operation. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/usb/host/ehci-orion.c | 26 +++----------------------- 1 file changed, 3 insertions(+), 23 deletions(-)