diff mbox series

[v4,03/10] usb: ehci-orion: avoid double PHY initialization

Message ID 20190125103925.15753-4-miquel.raynal@bootlin.com (mailing list archive)
State Superseded
Headers show
Series A3700 USB S2RAM support | expand

Commit Message

Miquel Raynal Jan. 25, 2019, 10:39 a.m. UTC 
No need to initialize the PHY from the driver's probe. It is done by
the core automatically and doing it twice would increment the
phy->powercount counter to 2 instead of 1. During later suspend
operation, the counter will be decremented to one, no phy->power_off()
will occur and worse than that, the following phy->power_on() at
resume time will also be skipped, failing the whole S2RAM operation.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
 drivers/usb/host/ehci-orion.c | 26 +++-----------------------
 1 file changed, 3 insertions(+), 23 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 1ad72647a069..3109f082949e 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -257,15 +257,7 @@  static int ehci_orion_drv_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->phy)) {
 		err = PTR_ERR(priv->phy);
 		if (err != -ENOSYS)
-			goto err_phy_get;
-	} else {
-		err = phy_init(priv->phy);
-		if (err)
-			goto err_phy_init;
-
-		err = phy_power_on(priv->phy);
-		if (err)
-			goto err_phy_power_on;
+			goto err_dis_clk;
 	}
 
 	/*
@@ -297,19 +289,12 @@  static int ehci_orion_drv_probe(struct platform_device *pdev)
 
 	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err)
-		goto err_add_hcd;
+		goto err_dis_clk;
 
 	device_wakeup_enable(hcd->self.controller);
 	return 0;
 
-err_add_hcd:
-	if (!IS_ERR(priv->phy))
-		phy_power_off(priv->phy);
-err_phy_power_on:
-	if (!IS_ERR(priv->phy))
-		phy_exit(priv->phy);
-err_phy_init:
-err_phy_get:
+err_dis_clk:
 	if (!IS_ERR(priv->clk))
 		clk_disable_unprepare(priv->clk);
 	usb_put_hcd(hcd);
@@ -327,11 +312,6 @@  static int ehci_orion_drv_remove(struct platform_device *pdev)
 
 	usb_remove_hcd(hcd);
 
-	if (!IS_ERR(priv->phy)) {
-		phy_power_off(priv->phy);
-		phy_exit(priv->phy);
-	}
-
 	if (!IS_ERR(priv->clk))
 		clk_disable_unprepare(priv->clk);