diff mbox series

[7/8] ARM: davinci: da830-evm: remove legacy usb helpers

Message ID 20190205102546.29457-8-brgl@bgdev.pl (mailing list archive)
State Superseded
Headers show
Series ARM: davinci: move the da8xx-ohci GPIO logic into the driver | expand

Commit Message

Bartosz Golaszewski Feb. 5, 2019, 10:25 a.m. UTC
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

The logic implemented by these routines now lives in the da8xx-ohci
driver. Remove dead code.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da830-evm.c | 67 -------------------------
 1 file changed, 67 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 0712a37153a8..8d30f68773a0 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -52,8 +52,6 @@  static const short da830_evm_usb11_pins[] = {
 	-1
 };
 
-static da8xx_ocic_handler_t da830_evm_usb_ocic_handler;
-
 static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = {
 	.dev_id		= "ohci-da8xx",
 	.table = {
@@ -62,60 +60,11 @@  static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = {
 	},
 };
 
-static int da830_evm_usb_set_power(unsigned port, int on)
-{
-	gpio_set_value(ON_BD_USB_DRV, on);
-	return 0;
-}
-
-static int da830_evm_usb_get_power(unsigned port)
-{
-	return gpio_get_value(ON_BD_USB_DRV);
-}
-
-static int da830_evm_usb_get_oci(unsigned port)
-{
-	return !gpio_get_value(ON_BD_USB_OVC);
-}
-
-static irqreturn_t da830_evm_usb_ocic_irq(int, void *);
-
-static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
-{
-	int irq 	= gpio_to_irq(ON_BD_USB_OVC);
-	int error	= 0;
-
-	if (handler != NULL) {
-		da830_evm_usb_ocic_handler = handler;
-
-		error = request_irq(irq, da830_evm_usb_ocic_irq,
-				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				    "OHCI over-current indicator", NULL);
-		if (error)
-			pr_err("%s: could not request IRQ to watch over-current indicator changes\n",
-			       __func__);
-	} else
-		free_irq(irq, NULL);
-
-	return error;
-}
-
 static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
-	.set_power	= da830_evm_usb_set_power,
-	.get_power	= da830_evm_usb_get_power,
-	.get_oci	= da830_evm_usb_get_oci,
-	.ocic_notify	= da830_evm_usb_ocic_notify,
-
 	/* TPS2065 switch @ 5V */
 	.potpgt		= (3 + 1) / 2,	/* 3 ms max */
 };
 
-static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id)
-{
-	da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1);
-	return IRQ_HANDLED;
-}
-
 static __init void da830_evm_usb_init(void)
 {
 	int ret;
@@ -150,22 +99,6 @@  static __init void da830_evm_usb_init(void)
 		return;
 	}
 
-	ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV");
-	if (ret) {
-		pr_err("%s: failed to request GPIO for USB 1.1 port power control: %d\n",
-		       __func__, ret);
-		return;
-	}
-	gpio_direction_output(ON_BD_USB_DRV, 0);
-
-	ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC");
-	if (ret) {
-		pr_err("%s: failed to request GPIO for USB 1.1 port over-current indicator: %d\n",
-		       __func__, ret);
-		return;
-	}
-	gpio_direction_input(ON_BD_USB_OVC);
-
 	gpiod_add_lookup_table(&da830_evm_usb_gpio_lookup);
 
 	ret = da8xx_register_usb11(&da830_evm_usb11_pdata);