diff mbox series

[v2,5/8] usb: ohci-da8xx: add vbus and overcurrent gpios

Message ID 20190211103702.4277-6-brgl@bgdev.pl (mailing list archive)
State New, archived
Headers show
Series ARM: davinci: move the da8xx-ohci GPIO logic into the driver | expand

Commit Message

Bartosz Golaszewski Feb. 11, 2019, 10:36 a.m. UTC 
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

There are two users upstream which register external callbacks for
switching the port power on/off and overcurrent protection. Both
users only use two GPIOs for that. Instead of having that functionality
in the board files, move the logic into the OHCI driver - including
the interrupt handler for overcurrent detection.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
 drivers/usb/host/ohci-da8xx.c | 99 ++++++++++++++++++-----------------
 1 file changed, 50 insertions(+), 49 deletions(-)

Comments

Sekhar Nori Feb. 12, 2019, 8:20 a.m. UTC | #1 
On 11/02/19 4:06 PM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> There are two users upstream which register external callbacks for
> switching the port power on/off and overcurrent protection. Both
> users only use two GPIOs for that. Instead of having that functionality
> in the board files, move the logic into the OHCI driver - including
> the interrupt handler for overcurrent detection.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> Acked-by: Alan Stern <stern@rowland.harvard.edu>
> ---
>  drivers/usb/host/ohci-da8xx.c | 99 ++++++++++++++++++-----------------
>  1 file changed, 50 insertions(+), 49 deletions(-)
> 
> diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
> index e8ede0b5e3f0..80c23307fbfe 100644
> --- a/drivers/usb/host/ohci-da8xx.c
> +++ b/drivers/usb/host/ohci-da8xx.c
> @@ -12,6 +12,7 @@
>  #include <linux/io.h>
>  #include <linux/interrupt.h>
>  #include <linux/jiffies.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/platform_device.h>

Added the new include in alphabetical order. With that minor fix, series
is applied to my v5.1/soc branch.

Thanks,
Sekhar
diff mbox series

Patch

diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index e8ede0b5e3f0..80c23307fbfe 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -12,6 +12,7 @@ 
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
+#include <linux/gpio/consumer.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -40,6 +41,8 @@  struct da8xx_ohci_hcd {
 	struct regulator *vbus_reg;
 	struct notifier_block nb;
 	unsigned int reg_enabled;
+	struct gpio_desc *vbus_gpio;
+	struct gpio_desc *oc_gpio;
 };
 
 #define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
@@ -86,12 +89,13 @@  static void ohci_da8xx_disable(struct usb_hcd *hcd)
 static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
-	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
+	struct device *dev = hcd->self.controller;
 	int ret;
 
-	if (hub && hub->set_power)
-		return hub->set_power(1, on);
+	if (da8xx_ohci->vbus_gpio) {
+		gpiod_set_value_cansleep(da8xx_ohci->vbus_gpio, on);
+		return 0;
+	}
 
 	if (!da8xx_ohci->vbus_reg)
 		return 0;
@@ -119,11 +123,9 @@  static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
 static int ohci_da8xx_get_power(struct usb_hcd *hcd)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
-	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 
-	if (hub && hub->get_power)
-		return hub->get_power(1);
+	if (da8xx_ohci->vbus_gpio)
+		return gpiod_get_value_cansleep(da8xx_ohci->vbus_gpio);
 
 	if (da8xx_ohci->vbus_reg)
 		return regulator_is_enabled(da8xx_ohci->vbus_reg);
@@ -134,13 +136,11 @@  static int ohci_da8xx_get_power(struct usb_hcd *hcd)
 static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
-	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 	unsigned int flags;
 	int ret;
 
-	if (hub && hub->get_oci)
-		return hub->get_oci(1);
+	if (da8xx_ohci->oc_gpio)
+		return gpiod_get_value_cansleep(da8xx_ohci->oc_gpio);
 
 	if (!da8xx_ohci->vbus_reg)
 		return 0;
@@ -158,10 +158,8 @@  static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
 static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
-	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 
-	if (hub && hub->set_power)
+	if (da8xx_ohci->vbus_gpio)
 		return 1;
 
 	if (da8xx_ohci->vbus_reg)
@@ -173,10 +171,8 @@  static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
 static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
-	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 
-	if (hub && hub->get_oci)
+	if (da8xx_ohci->oc_gpio)
 		return 1;
 
 	if (da8xx_ohci->vbus_reg)
@@ -196,19 +192,6 @@  static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd)
 	return 0;
 }
 
-/*
- * Handle the port over-current indicator change.
- */
-static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
-				    unsigned port)
-{
-	ocic_mask |= 1 << port;
-
-	/* Once over-current is detected, the port needs to be powered down */
-	if (hub->get_oci(port) > 0)
-		hub->set_power(port, 0);
-}
-
 static int ohci_da8xx_regulator_event(struct notifier_block *nb,
 				unsigned long event, void *data)
 {
@@ -223,16 +206,23 @@  static int ohci_da8xx_regulator_event(struct notifier_block *nb,
 	return 0;
 }
 
+static irqreturn_t ohci_da8xx_oc_handler(int irq, void *data)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = data;
+
+	if (gpiod_get_value(da8xx_ohci->oc_gpio))
+		gpiod_set_value(da8xx_ohci->vbus_gpio, 0);
+
+	return IRQ_HANDLED;
+}
+
 static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
 	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 	int ret = 0;
 
-	if (hub && hub->ocic_notify) {
-		ret = hub->ocic_notify(ohci_da8xx_ocic_handler);
-	} else if (da8xx_ohci->vbus_reg) {
+	if (!da8xx_ohci->oc_gpio && da8xx_ohci->vbus_reg) {
 		da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event;
 		ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg,
 						&da8xx_ohci->nb);
@@ -244,15 +234,6 @@  static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
 	return ret;
 }
 
-static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd)
-{
-	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
-
-	if (hub && hub->ocic_notify)
-		hub->ocic_notify(NULL);
-}
-
 static int ohci_da8xx_reset(struct usb_hcd *hcd)
 {
 	struct device *dev		= hcd->self.controller;
@@ -403,9 +384,9 @@  static int ohci_da8xx_probe(struct platform_device *pdev)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci;
 	struct device *dev = &pdev->dev;
+	int error, hcd_irq, oc_irq;
 	struct usb_hcd	*hcd;
 	struct resource *mem;
-	int error, irq;
 
 	hcd = usb_create_hcd(&ohci_da8xx_hc_driver, dev, dev_name(dev));
 	if (!hcd)
@@ -443,6 +424,27 @@  static int ohci_da8xx_probe(struct platform_device *pdev)
 		}
 	}
 
+	da8xx_ohci->vbus_gpio = devm_gpiod_get_optional(dev, "vbus",
+							GPIOD_OUT_HIGH);
+	if (IS_ERR(da8xx_ohci->vbus_gpio))
+		goto err;
+
+	da8xx_ohci->oc_gpio = devm_gpiod_get_optional(dev, "oc", GPIOD_IN);
+	if (IS_ERR(da8xx_ohci->oc_gpio))
+		goto err;
+
+	if (da8xx_ohci->oc_gpio) {
+		oc_irq = gpiod_to_irq(da8xx_ohci->oc_gpio);
+		if (oc_irq < 0)
+			goto err;
+
+		error = devm_request_irq(dev, oc_irq, ohci_da8xx_oc_handler,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"OHCI over-current indicator", da8xx_ohci);
+		if (error)
+			goto err;
+	}
+
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	hcd->regs = devm_ioremap_resource(dev, mem);
 	if (IS_ERR(hcd->regs)) {
@@ -452,13 +454,13 @@  static int ohci_da8xx_probe(struct platform_device *pdev)
 	hcd->rsrc_start = mem->start;
 	hcd->rsrc_len = resource_size(mem);
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
+	hcd_irq = platform_get_irq(pdev, 0);
+	if (hcd_irq < 0) {
 		error = -ENODEV;
 		goto err;
 	}
 
-	error = usb_add_hcd(hcd, irq, 0);
+	error = usb_add_hcd(hcd, hcd_irq, 0);
 	if (error)
 		goto err;
 
@@ -481,7 +483,6 @@  static int ohci_da8xx_remove(struct platform_device *pdev)
 {
 	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
 
-	ohci_da8xx_unregister_notify(hcd);
 	usb_remove_hcd(hcd);
 	usb_put_hcd(hcd);