| Message ID | 20190218112310.17860-2-chenyu56@huawei.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for usb on Hikey960 | expand |
On Mon, Feb 18, 2019 at 07:23:01PM +0800, Yu Chen wrote: > This patch adds binding documentation for supporting the hi3660 usb > phy on boards like the HiKey960. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: John Stultz <john.stultz@linaro.org> > Cc: Binghui Wang <wangbinghui@hisilicon.com> > Signed-off-by: Yu Chen <chenyu56@huawei.com> > --- > v1: > * Fix some format error as suggested by Rob. > v2: > * Change hi3660 usb PHY to hi3660 USB PHY > --- > --- > .../devicetree/bindings/phy/phy-hi3660-usb3.txt | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt > > diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt > new file mode 100644 > index 000000000000..f9a3d56cfdd2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt > @@ -0,0 +1,21 @@ > +Hisilicon hi3660 USB PHY > +----------------------- > + > +Required properties: > +- compatible: should be "hisilicon,hi3660-usb-phy" > +- #phy-cells: must be 0 > +- hisilicon,pericrg-syscon: phandle of syscon used to control phy. > +- hisilicon,pctrl-syscon: phandle of syscon used to control phy. > +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy. > +- hisilicon,eye-diagram-param: parameter set for phy > +Refer to phy/phy-bindings.txt for the generic PHY binding properties > + > +Example: > + usb-phy { > + compatible = "hisilicon,hi3660-usb-phy"; > + #phy-cells = <0>; > + hisilicon,pericrg-syscon = <&crg_ctrl>; > + hisilicon,pctrl-syscon = <&pctrl>; > + hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>; Are most of the registers within one of these blocks? If so, make this node a child of that node. > + hisilicon,eye-diagram-param = <0x22466e4>; > + }; > -- > 2.15.0-rc2 >
Hi, On 2019/2/19 4:18, Rob Herring wrote: > On Mon, Feb 18, 2019 at 07:23:01PM +0800, Yu Chen wrote: >> This patch adds binding documentation for supporting the hi3660 usb >> phy on boards like the HiKey960. >> >> Cc: Rob Herring <robh+dt@kernel.org> >> Cc: Mark Rutland <mark.rutland@arm.com> >> Cc: John Stultz <john.stultz@linaro.org> >> Cc: Binghui Wang <wangbinghui@hisilicon.com> >> Signed-off-by: Yu Chen <chenyu56@huawei.com> >> --- >> v1: >> * Fix some format error as suggested by Rob. >> v2: >> * Change hi3660 usb PHY to hi3660 USB PHY >> --- >> --- >> .../devicetree/bindings/phy/phy-hi3660-usb3.txt | 21 +++++++++++++++++++++ >> 1 file changed, 21 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt >> >> diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt >> new file mode 100644 >> index 000000000000..f9a3d56cfdd2 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt >> @@ -0,0 +1,21 @@ >> +Hisilicon hi3660 USB PHY >> +----------------------- >> + >> +Required properties: >> +- compatible: should be "hisilicon,hi3660-usb-phy" >> +- #phy-cells: must be 0 >> +- hisilicon,pericrg-syscon: phandle of syscon used to control phy. >> +- hisilicon,pctrl-syscon: phandle of syscon used to control phy. >> +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy. >> +- hisilicon,eye-diagram-param: parameter set for phy >> +Refer to phy/phy-bindings.txt for the generic PHY binding properties >> + >> +Example: >> + usb-phy { >> + compatible = "hisilicon,hi3660-usb-phy"; >> + #phy-cells = <0>; >> + hisilicon,pericrg-syscon = <&crg_ctrl>; >> + hisilicon,pctrl-syscon = <&pctrl>; >> + hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>; > > Are most of the registers within one of these blocks? If so, make this > node a child of that node. I met a problem when I made this node a child of the syscon node, the driver "phy-hi3660-usb3" was not probed. Do you have any idea about how to make it probed when it is a child node? > >> + hisilicon,eye-diagram-param = <0x22466e4>; >> + }; >> -- >> 2.15.0-rc2 >> > > . > Thanks Yu Chen
Hi, On Tue, 2019-02-19 at 09:50 +0800, Chen Yu wrote: > Hi, > > On 2019/2/19 4:18, Rob Herring wrote: > > On Mon, Feb 18, 2019 at 07:23:01PM +0800, Yu Chen wrote: > >> This patch adds binding documentation for supporting the hi3660 usb > >> phy on boards like the HiKey960. > >> > >> Cc: Rob Herring <robh+dt@kernel.org> > >> Cc: Mark Rutland <mark.rutland@arm.com> > >> Cc: John Stultz <john.stultz@linaro.org> > >> Cc: Binghui Wang <wangbinghui@hisilicon.com> > >> Signed-off-by: Yu Chen <chenyu56@huawei.com> > >> --- > >> v1: > >> * Fix some format error as suggested by Rob. > >> v2: > >> * Change hi3660 usb PHY to hi3660 USB PHY > >> --- > >> --- > >> .../devicetree/bindings/phy/phy-hi3660-usb3.txt | 21 +++++++++++++++++++++ > >> 1 file changed, 21 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt > >> > >> diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt > >> new file mode 100644 > >> index 000000000000..f9a3d56cfdd2 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt > >> @@ -0,0 +1,21 @@ > >> +Hisilicon hi3660 USB PHY > >> +----------------------- > >> + > >> +Required properties: > >> +- compatible: should be "hisilicon,hi3660-usb-phy" > >> +- #phy-cells: must be 0 > >> +- hisilicon,pericrg-syscon: phandle of syscon used to control phy. > >> +- hisilicon,pctrl-syscon: phandle of syscon used to control phy. > >> +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy. > >> +- hisilicon,eye-diagram-param: parameter set for phy > >> +Refer to phy/phy-bindings.txt for the generic PHY binding properties > >> + > >> +Example: > >> + usb-phy { > >> + compatible = "hisilicon,hi3660-usb-phy"; > >> + #phy-cells = <0>; > >> + hisilicon,pericrg-syscon = <&crg_ctrl>; > >> + hisilicon,pctrl-syscon = <&pctrl>; > >> + hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>; > > > > Are most of the registers within one of these blocks? If so, make this > > node a child of that node. > I met a problem when I made this node a child of the syscon node, > the driver "phy-hi3660-usb3" was not probed. > Do you have any idea about how to make it probed when it is a child node? call of_platform_populate() in parent node's driver, but I don't know whether it's a standard way > > > >> + hisilicon,eye-diagram-param = <0x22466e4>; > >> + }; > >> -- > >> 2.15.0-rc2 > >> > > > > . > > > > Thanks > Yu Chen >
Hi, On 2019/2/19 11:03, Chunfeng Yun wrote: >>>> + >>>> +Example: >>>> + usb-phy { >>>> + compatible = "hisilicon,hi3660-usb-phy"; >>>> + #phy-cells = <0>; >>>> + hisilicon,pericrg-syscon = <&crg_ctrl>; >>>> + hisilicon,pctrl-syscon = <&pctrl>; >>>> + hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>; >>> >>> Are most of the registers within one of these blocks? If so, make this >>> node a child of that node. >> I met a problem when I made this node a child of the syscon node, >> the driver "phy-hi3660-usb3" was not probed. >> Do you have any idea about how to make it probed when it is a child node? > call of_platform_populate() in parent node's driver, > but I don't know whether it's a standard way Yes, this function is used in dwc3 driver to probe the child node. But I think it is not a good way to modify the syscon driver. >>> >>>> + hisilicon,eye-diagram-param = <0x22466e4>; >>>> + }; >>>> -- >>>> 2.15.0-rc2 >>>> Thanks Yu Chen
On Mon, Feb 18, 2019 at 9:03 PM Chunfeng Yun <chunfeng.yun@mediatek.com> wrote: > > Hi, > On Tue, 2019-02-19 at 09:50 +0800, Chen Yu wrote: > > Hi, > > > > On 2019/2/19 4:18, Rob Herring wrote: > > > On Mon, Feb 18, 2019 at 07:23:01PM +0800, Yu Chen wrote: > > >> This patch adds binding documentation for supporting the hi3660 usb > > >> phy on boards like the HiKey960. > > >> > > >> Cc: Rob Herring <robh+dt@kernel.org> > > >> Cc: Mark Rutland <mark.rutland@arm.com> > > >> Cc: John Stultz <john.stultz@linaro.org> > > >> Cc: Binghui Wang <wangbinghui@hisilicon.com> > > >> Signed-off-by: Yu Chen <chenyu56@huawei.com> > > >> --- > > >> v1: > > >> * Fix some format error as suggested by Rob. > > >> v2: > > >> * Change hi3660 usb PHY to hi3660 USB PHY > > >> --- > > >> --- > > >> .../devicetree/bindings/phy/phy-hi3660-usb3.txt | 21 +++++++++++++++++++++ > > >> 1 file changed, 21 insertions(+) > > >> create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt > > >> > > >> diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt > > >> new file mode 100644 > > >> index 000000000000..f9a3d56cfdd2 > > >> --- /dev/null > > >> +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt > > >> @@ -0,0 +1,21 @@ > > >> +Hisilicon hi3660 USB PHY > > >> +----------------------- > > >> + > > >> +Required properties: > > >> +- compatible: should be "hisilicon,hi3660-usb-phy" > > >> +- #phy-cells: must be 0 > > >> +- hisilicon,pericrg-syscon: phandle of syscon used to control phy. > > >> +- hisilicon,pctrl-syscon: phandle of syscon used to control phy. > > >> +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy. > > >> +- hisilicon,eye-diagram-param: parameter set for phy > > >> +Refer to phy/phy-bindings.txt for the generic PHY binding properties > > >> + > > >> +Example: > > >> + usb-phy { > > >> + compatible = "hisilicon,hi3660-usb-phy"; > > >> + #phy-cells = <0>; > > >> + hisilicon,pericrg-syscon = <&crg_ctrl>; > > >> + hisilicon,pctrl-syscon = <&pctrl>; > > >> + hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>; > > > > > > Are most of the registers within one of these blocks? If so, make this > > > node a child of that node. > > I met a problem when I made this node a child of the syscon node, > > the driver "phy-hi3660-usb3" was not probed. > > Do you have any idea about how to make it probed when it is a child node? > call of_platform_populate() in parent node's driver, > but I don't know whether it's a standard way It is. The other way is adding 'simple-mfd' compatible if there is no driver for the parent. Rob
diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt new file mode 100644 index 000000000000..f9a3d56cfdd2 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt @@ -0,0 +1,21 @@ +Hisilicon hi3660 USB PHY +----------------------- + +Required properties: +- compatible: should be "hisilicon,hi3660-usb-phy" +- #phy-cells: must be 0 +- hisilicon,pericrg-syscon: phandle of syscon used to control phy. +- hisilicon,pctrl-syscon: phandle of syscon used to control phy. +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy. +- hisilicon,eye-diagram-param: parameter set for phy +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + usb-phy { + compatible = "hisilicon,hi3660-usb-phy"; + #phy-cells = <0>; + hisilicon,pericrg-syscon = <&crg_ctrl>; + hisilicon,pctrl-syscon = <&pctrl>; + hisilicon,usb3-otg-bc-syscon = <&usb3_otg_bc>; + hisilicon,eye-diagram-param = <0x22466e4>; + };
This patch adds binding documentation for supporting the hi3660 usb phy on boards like the HiKey960. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Binghui Wang <wangbinghui@hisilicon.com> Signed-off-by: Yu Chen <chenyu56@huawei.com> --- v1: * Fix some format error as suggested by Rob. v2: * Change hi3660 usb PHY to hi3660 USB PHY --- --- .../devicetree/bindings/phy/phy-hi3660-usb3.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt