@@ -1,12 +1,15 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS_trace.o := -I$(src)
+CFLAGS_trace.o := -I$(src)
-obj-$(CONFIG_TYPEC_UCSI) += typec_ucsi.o
+obj-$(CONFIG_TYPEC_UCSI) += typec_ucsi.o
-typec_ucsi-y := ucsi.o
+typec_ucsi-y := ucsi.o
-typec_ucsi-$(CONFIG_TRACING) += trace.o
+typec_ucsi-$(CONFIG_TRACING) += trace.o
-obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
+ifneq ($(CONFIG_TYPEC_DP_ALTMODE),)
+ typec_ucsi-y += displayport.o
+endif
-obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
+obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
+obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
new file mode 100644
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UCSI DisplayPort Alternate Mode Support
+ *
+ * Copyright (C) 2018, Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/pd_vdo.h>
+
+#include "ucsi.h"
+
+#define UCSI_CMD_SET_NEW_CAM(_con_num_, _enter_, _cam_, _am_) \
+ (UCSI_SET_NEW_CAM | ((_con_num_) << 16) | ((_enter_) << 23) | \
+ ((_cam_) << 24) | ((u64)(_am_) << 32))
+
+struct ucsi_dp {
+ struct typec_displayport_data data;
+ struct ucsi_connector *con;
+ struct typec_altmode *alt;
+ struct work_struct work;
+ int offset;
+
+ bool override;
+ bool initialized;
+
+ u32 header;
+ u32 *vdo_data;
+ u8 vdo_size;
+};
+
+/*
+ * Note. Alternate mode control is optional feature in UCSI. It means that even
+ * if the system supports alternate modes, the OS may not be aware of them.
+ *
+ * In most cases however, the OS will be able to see the supported alternate
+ * modes, but it may still not be able to configure them, not even enter or exit
+ * them. That is because UCSI defines alt mode details and alt mode "overriding"
+ * as separate options.
+ *
+ * In case alt mode details are supported, but overriding is not, the driver
+ * will still display the supported pin assignments and configuration, but any
+ * changes the user attempts to do will lead into failure with return value of
+ * -EOPNOTSUPP.
+ */
+
+static int ucsi_displayport_enter(struct typec_altmode *alt)
+{
+ struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
+ struct ucsi_control ctrl;
+ u8 cur = 0;
+
+ mutex_lock(&dp->con->lock);
+
+ if (!dp->override && dp->initialized) {
+ const struct typec_altmode *p = typec_altmode_get_partner(alt);
+
+ dev_warn(&p->dev,
+ "firmware doesn't support alternate mode overriding\n");
+ mutex_unlock(&dp->con->lock);
+ return -EOPNOTSUPP;
+ }
+
+ UCSI_CMD_GET_CURRENT_CAM(ctrl, dp->con->num);
+ ucsi_send_command(dp->con->ucsi, &ctrl, &cur, sizeof(cur));
+ if (cur == 0xff) {
+ mutex_unlock(&dp->con->lock);
+ return -EBUSY;
+ }
+
+ /*
+ * We can't send the New CAM command yet to the PPM as it needs the
+ * configuration value as well. Pretending that we have now entered the
+ * mode, and letting the alt mode driver continue.
+ */
+
+ dp->header = VDO(USB_TYPEC_DP_SID, 1, CMD_ENTER_MODE);
+ dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+
+ dp->vdo_data = NULL;
+ dp->vdo_size = 1;
+
+ schedule_work(&dp->work);
+
+ mutex_unlock(&dp->con->lock);
+
+ return 0;
+}
+
+static int ucsi_displayport_exit(struct typec_altmode *alt)
+{
+ struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
+ struct ucsi_control ctrl;
+ int ret = 0;
+
+ mutex_lock(&dp->con->lock);
+
+ if (!dp->override) {
+ const struct typec_altmode *p = typec_altmode_get_partner(alt);
+
+ dev_warn(&p->dev,
+ "firmware doesn't support alternate mode overriding\n");
+ ret = -EOPNOTSUPP;
+ goto out_unlock;
+ }
+
+ ctrl.raw_cmd = UCSI_CMD_SET_NEW_CAM(dp->con->num, 0, dp->offset, 0);
+ ret = ucsi_send_command(dp->con->ucsi, &ctrl, NULL, 0);
+ if (ret < 0)
+ goto out_unlock;
+
+ dp->header = VDO(USB_TYPEC_DP_SID, 1, CMD_EXIT_MODE);
+ dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+
+ dp->vdo_data = NULL;
+ dp->vdo_size = 1;
+
+ schedule_work(&dp->work);
+
+out_unlock:
+ mutex_unlock(&dp->con->lock);
+
+ return ret;
+}
+
+/*
+ * We do not actually have access to the Status Update VDO, so we have to guess
+ * things.
+ */
+static int ucsi_displayport_status_update(struct ucsi_dp *dp)
+{
+ u32 cap = dp->alt->vdo;
+
+ dp->data.status = DP_STATUS_ENABLED;
+
+ /*
+ * If pin assignement D is supported, claiming always
+ * that Multi-function is preferred.
+ */
+ if (DP_CAP_CAPABILITY(cap) & DP_CAP_UFP_D) {
+ dp->data.status |= DP_STATUS_CON_UFP_D;
+
+ if (DP_CAP_UFP_D_PIN_ASSIGN(cap) & BIT(DP_PIN_ASSIGN_D))
+ dp->data.status |= DP_STATUS_PREFER_MULTI_FUNC;
+ } else {
+ dp->data.status |= DP_STATUS_CON_DFP_D;
+
+ if (DP_CAP_DFP_D_PIN_ASSIGN(cap) & BIT(DP_PIN_ASSIGN_D))
+ dp->data.status |= DP_STATUS_PREFER_MULTI_FUNC;
+ }
+
+ dp->vdo_data = &dp->data.status;
+ dp->vdo_size = 2;
+
+ return 0;
+}
+
+static int ucsi_displayport_configure(struct ucsi_dp *dp)
+{
+ u32 pins = DP_CONF_GET_PIN_ASSIGN(dp->data.conf);
+ struct ucsi_control ctrl;
+
+ if (!dp->override)
+ return 0;
+
+ ctrl.raw_cmd = UCSI_CMD_SET_NEW_CAM(dp->con->num, 1, dp->offset, pins);
+
+ return ucsi_send_command(dp->con->ucsi, &ctrl, NULL, 0);
+}
+
+static int ucsi_displayport_vdm(struct typec_altmode *alt,
+ u32 header, const u32 *data, int count)
+{
+ struct ucsi_dp *dp = typec_altmode_get_drvdata(alt);
+ int cmd_type = PD_VDO_CMDT(header);
+ int cmd = PD_VDO_CMD(header);
+
+ mutex_lock(&dp->con->lock);
+
+ if (!dp->override && dp->initialized) {
+ const struct typec_altmode *p = typec_altmode_get_partner(alt);
+
+ dev_warn(&p->dev,
+ "firmware doesn't support alternate mode overriding\n");
+ mutex_unlock(&dp->con->lock);
+ return -EOPNOTSUPP;
+ }
+
+ switch (cmd_type) {
+ case CMDT_INIT:
+ dp->header = VDO(USB_TYPEC_DP_SID, 1, cmd);
+ dp->header |= VDO_OPOS(USB_TYPEC_DP_MODE);
+
+ switch (cmd) {
+ case DP_CMD_STATUS_UPDATE:
+ if (ucsi_displayport_status_update(dp))
+ dp->header |= VDO_CMDT(CMDT_RSP_NAK);
+ else
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+ break;
+ case DP_CMD_CONFIGURE:
+ dp->data.conf = *data;
+ if (ucsi_displayport_configure(dp)) {
+ dp->header |= VDO_CMDT(CMDT_RSP_NAK);
+ } else {
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+ if (dp->initialized)
+ ucsi_altmode_update_active(dp->con);
+ else
+ dp->initialized = true;
+ }
+ break;
+ default:
+ dp->header |= VDO_CMDT(CMDT_RSP_ACK);
+ break;
+ }
+
+ schedule_work(&dp->work);
+ break;
+ default:
+ break;
+ }
+
+ mutex_unlock(&dp->con->lock);
+
+ return 0;
+}
+
+static const struct typec_altmode_ops ucsi_displayport_ops = {
+ .enter = ucsi_displayport_enter,
+ .exit = ucsi_displayport_exit,
+ .vdm = ucsi_displayport_vdm,
+};
+
+static void ucsi_displayport_work(struct work_struct *work)
+{
+ struct ucsi_dp *dp = container_of(work, struct ucsi_dp, work);
+ int ret;
+
+ mutex_lock(&dp->con->lock);
+
+ ret = typec_altmode_vdm(dp->alt, dp->header,
+ dp->vdo_data, dp->vdo_size);
+ if (ret)
+ dev_err(&dp->alt->dev, "VDM 0x%x failed\n", dp->header);
+
+ dp->vdo_data = NULL;
+ dp->vdo_size = 0;
+ dp->header = 0;
+
+ mutex_unlock(&dp->con->lock);
+}
+
+void ucsi_displayport_remove_partner(struct typec_altmode *alt)
+{
+ struct ucsi_dp *dp;
+
+ if (!alt)
+ return;
+
+ dp = typec_altmode_get_drvdata(alt);
+ dp->data.conf = 0;
+ dp->data.status = 0;
+ dp->initialized = false;
+}
+
+struct typec_altmode *ucsi_register_displayport(struct ucsi_connector *con,
+ bool override, int offset,
+ struct typec_altmode_desc *desc)
+{
+ u8 all_assignments = BIT(DP_PIN_ASSIGN_C) | BIT(DP_PIN_ASSIGN_D) |
+ BIT(DP_PIN_ASSIGN_E);
+ struct typec_altmode *alt;
+ struct ucsi_dp *dp;
+
+ /* We can't rely on the firmware with the capabilities. */
+ desc->vdo |= DP_CAP_DP_SIGNALING | DP_CAP_RECEPTACLE;
+
+ /* Claiming that we support all pin assignments */
+ desc->vdo |= all_assignments << 8;
+ desc->vdo |= all_assignments << 16;
+
+ alt = typec_port_register_altmode(con->port, desc);
+ if (IS_ERR(alt))
+ return alt;
+
+ dp = devm_kzalloc(&alt->dev, sizeof(*dp), GFP_KERNEL);
+ if (!dp) {
+ typec_unregister_altmode(alt);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ INIT_WORK(&dp->work, ucsi_displayport_work);
+ dp->override = override;
+ dp->offset = offset;
+ dp->con = con;
+ dp->alt = alt;
+
+ alt->ops = &ucsi_displayport_ops;
+ typec_altmode_set_drvdata(alt, dp);
+
+ return alt;
+}
@@ -12,7 +12,7 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/usb/typec_altmode.h>
+#include <linux/usb/typec_dp.h>
#include "ucsi.h"
#include "trace.h"
@@ -291,9 +291,12 @@ static int ucsi_register_altmode(struct ucsi_connector *con,
u8 recipient)
{
struct typec_altmode *alt;
+ bool override;
int ret;
int i;
+ override = !!(con->ucsi->cap.features & UCSI_CAP_ALT_MODE_OVERRIDE);
+
switch (recipient) {
case UCSI_RECIPIENT_CON:
i = ucsi_next_altmode(con->port_altmode);
@@ -305,7 +308,15 @@ static int ucsi_register_altmode(struct ucsi_connector *con,
desc->mode = ucsi_altmode_next_mode(con->port_altmode,
desc->svid);
- alt = typec_port_register_altmode(con->port, desc);
+ switch (desc->svid) {
+ case USB_TYPEC_DP_SID:
+ alt = ucsi_register_displayport(con, override, i, desc);
+ break;
+ default:
+ alt = typec_port_register_altmode(con->port, desc);
+ break;
+ }
+
if (IS_ERR(alt)) {
ret = PTR_ERR(alt);
goto err;
@@ -400,6 +411,7 @@ static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient)
static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
{
+ const struct typec_altmode *pdev;
struct typec_altmode **adev;
int i = 0;
@@ -415,6 +427,11 @@ static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
}
while (adev[i]) {
+ if (recipient == UCSI_RECIPIENT_SOP &&
+ adev[i]->svid == USB_TYPEC_DP_SID) {
+ pdev = typec_altmode_get_partner(adev[i]);
+ ucsi_displayport_remove_partner((void *)pdev);
+ }
typec_unregister_altmode(adev[i]);
adev[i++] = NULL;
}
@@ -406,4 +406,25 @@ int ucsi_send_command(struct ucsi *ucsi, struct ucsi_control *ctrl,
void ucsi_altmode_update_active(struct ucsi_connector *con);
+#if IS_ENABLED(CONFIG_TYPEC_DP_ALTMODE)
+struct typec_altmode *
+ucsi_register_displayport(struct ucsi_connector *con,
+ bool override, int offset,
+ struct typec_altmode_desc *desc);
+
+void ucsi_displayport_remove_partner(struct typec_altmode *adev);
+
+#else
+static inline struct typec_altmode *
+ucsi_register_displayport(struct ucsi_connector *con,
+ bool override, int offset,
+ struct typec_altmode_desc *desc)
+{
+ return NULL;
+}
+
+static inline void
+ucsi_displayport_remove_partner(struct typec_altmode *adev) { }
+#endif /* CONFIG_TYPEC_DP_ALTMODE */
+
#endif /* __DRIVER_USB_TYPEC_UCSI_H */