| Message ID | 20190506234631.113226-11-chris.brandt@renesas.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | usb: Add host and device support for RZ/A2 | expand |
On Mon, May 06, 2019 at 06:46:31PM -0500, Chris Brandt wrote: > Enable USB Host support for both the Type-C connector on the CPU board > and the Type-A plug on the sub board. > > Both boards are also capable of USB Device operation as well after the > appropriate Device Tree modifications. > > Signed-off-by: Chris Brandt <chris.brandt@renesas.com> > --- > arch/arm/boot/dts/r7s9210-rza2mevb.dts | 37 ++++++++++++++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > > diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts > index 1eba37db7cdc..79d9d4b4779f 100644 > --- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts > +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts > @@ -100,6 +100,18 @@ > pinmux = <RZA2_PINMUX(PORT5, 4, 3)>, /* SD1_CD */ > <RZA2_PINMUX(PORT5, 5, 3)>; /* SD1_WP */ > }; > + > + usb0_pins: usb0 { > + pinmux = <RZA2_PINMUX(PORT5, 2, 3)>, /* VBUSIN0 */ > + <RZA2_PINMUX(PORTC, 6, 1)>, /* VBUSEN0 */ > + <RZA2_PINMUX(PORTC, 7, 1)>; /* OVRCUR0 */ > + }; > + > + usb1_pins: usb1 { > + pinmux = <RZA2_PINMUX(PORTC, 0, 1)>, /* VBUSIN1 */ > + <RZA2_PINMUX(PORTC, 5, 1)>, /* VBUSEN1 */ > + <RZA2_PINMUX(PORT7, 5, 5)>; /* OVRCUR1 */ > + }; > }; > > /* High resolution System tick timers */ > @@ -154,3 +166,28 @@ > bus-width = <4>; > status = "okay"; > }; > + > +/* USB-0 as Host */ > +/* NOTE: Requires JP3 to be fitted */ > +&usb2_phy0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&usb0_pins>; > + renesas,uses_usb_x1; > + dr_mode = "host"; > + status = "okay"; > +}; Hi Chris, Please add a space between the usb2_phy0 and ehci0 nodes. Likewise below between the usb2_phy1 and ehci1 nodes. Otherwise this patch looks good to me. > +&ehci0 { > + status = "okay"; > +}; > + > +/* USB-1 as Host */ > +&usb2_phy1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&usb1_pins>; > + renesas,uses_usb_x1; > + dr_mode = "host"; > + status = "okay"; > +}; > +&ehci1 { > + status = "okay"; > +}; > -- > 2.16.1 >
Hi Simon, On Wed, May 08, 2019, Simon Horman wrote: > Please add a space between the usb2_phy0 and ehci0 nodes. > Likewise below between the usb2_phy1 and ehci1 nodes. > > Otherwise this patch looks good to me. I also see that you renamed some patch titles from "ARM: dts: r7s9210-rza2mevb: xxx" to "ARM: dts: rza2mevb: xxx" when you applied them. So I will make that change as well. Chris
diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts index 1eba37db7cdc..79d9d4b4779f 100644 --- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts @@ -100,6 +100,18 @@ pinmux = <RZA2_PINMUX(PORT5, 4, 3)>, /* SD1_CD */ <RZA2_PINMUX(PORT5, 5, 3)>; /* SD1_WP */ }; + + usb0_pins: usb0 { + pinmux = <RZA2_PINMUX(PORT5, 2, 3)>, /* VBUSIN0 */ + <RZA2_PINMUX(PORTC, 6, 1)>, /* VBUSEN0 */ + <RZA2_PINMUX(PORTC, 7, 1)>; /* OVRCUR0 */ + }; + + usb1_pins: usb1 { + pinmux = <RZA2_PINMUX(PORTC, 0, 1)>, /* VBUSIN1 */ + <RZA2_PINMUX(PORTC, 5, 1)>, /* VBUSEN1 */ + <RZA2_PINMUX(PORT7, 5, 5)>; /* OVRCUR1 */ + }; }; /* High resolution System tick timers */ @@ -154,3 +166,28 @@ bus-width = <4>; status = "okay"; }; + +/* USB-0 as Host */ +/* NOTE: Requires JP3 to be fitted */ +&usb2_phy0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + renesas,uses_usb_x1; + dr_mode = "host"; + status = "okay"; +}; +&ehci0 { + status = "okay"; +}; + +/* USB-1 as Host */ +&usb2_phy1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + renesas,uses_usb_x1; + dr_mode = "host"; + status = "okay"; +}; +&ehci1 { + status = "okay"; +};
Enable USB Host support for both the Type-C connector on the CPU board and the Type-A plug on the sub board. Both boards are also capable of USB Device operation as well after the appropriate Device Tree modifications. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> --- arch/arm/boot/dts/r7s9210-rza2mevb.dts | 37 ++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+)